1 / 4
Bambulab spool holder adapter for 3030 extrusion (RatRig)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapt an all metal Bambulab spool holder to a 3030 extrusion. Designed for a RatRig V-Core 4.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Spool holders using PTFE tubes were chewed up by cardboard spools after some time and I had an all metal bambulab spool holder lying around…
(For RatRig V-Core 4 owners : the adapter width + the length of the Bambulab spool holder stills clear the bed, so it's fully compatible with the original spool holder location)
Print instructions:
- no supports
- part already oriented in .stl (flat side down)
- standards RatRig print settings : 4x walls, 0.2 layer height, 25% infill
- material : if enclosed, preferably ABS or ASA
BOM:
- 1x adapter (printed part)
- 1x Bambulab spool holder
- 2x m3 Inserts (5,7 x 3 x 4,6 mm preferably, but with enough heat, any m3 insert size should fit :D)
- 2x m3x10mm Hex Socket Head Cap Screws (SHCS)
- 2x m6x12mm Hex Socket Head Cap Screws (SHCS)
- 2x m6 T-Nut - Drop In Type for 30 Series
Assembly instructions:
- Print the adapter
- Press the m3 inserts from the back of the adapter until flush with the surface
- Insert m3 screws through the adapter to clean the holes from any melted plastic
- Remove the m3 screws
- Fix the Bambulab spool holder on the adapter using the 2x m3x10mm screws
- Insert the m6x12mm screws through the adapter, head should be flush with the printed part surface
- Screw some threads the T-Nut on the m6x12 screws
- Place the assembly on the 3030 extrusion
- Tigthen the m6x12 screws
- Enjoy your new spool holder