1 / 1
Sagrotan / Dettol Soap Dispenser Gears — image 1

Sagrotan / Dettol Soap Dispenser Gears

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Change the quantity your soap dispenser emits depending on your preference. Different options available!

Rating
4 / 5
Likes
9
Downloads
102
Makes
1
Views
334
Reviews
1

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial — Share Alike

The Sagrotan/Dettol soap dispensers are very simple contraptions inside. In effect, a single cog determines how much soap is pulled/pushed by the moving piston. Originally, the cog moving the piston has a pin that is offset by 6mm, resulting in 12mm of stroke. I have designed alternative cogs that offer a reduced amount of stroke varying between the original spec down to 50%. 

The quantity of soap should be proportional to the amount of stroke reduced, but is a little off. My experiments place it at 0.1g/mm at the original 12mm stroke (1.2g of soap), and around 0.075g/mm at 6mm stroke (0.45g). Depending on your soap density, this may be different, as the pump operates volumetrically.

The models are named according to the offset of the pin (in mm * 10), double it for the stroke length.

Print with supports. PLA is harder than ABS and PETG at room temperature, so I suggest using that.