Counting matching models…
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
Print approx. €4.10–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Easy-to-print flower pot with a simple and modern design. No supports needed. The planter can be resized according to your preferences, either enlarged or reduced as necessary. This design is easily printable.
Print approx. €8.28–€10.12 excl. taxPreliminary estimate for PETGSource material: PET
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Halloween themed board game inspired by Connect 4. Print instructions Print two sets (25 pcs) of discs in different colors. The top of the game must be glued together with acrylic glue. How to assemble? Insert the bigger piece of the top…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Article with build instructions: https://blog.prusaprinters.org/dryboxes-and-alternative-spool-holders-not-only-for-multimaterial-upgrade/ Material: Prusament PLA Galaxy Black
Print approx. €13.60–€16.62 excl. taxPreliminary estimate for one variant
Next remix of Drybox for Prusa Printer Enclosure V2 - with humidity sensor. Print instructions You can place five pieces of this drybox on the top of the Prusa Printer Enclosure V2. Can be used as a standalone spool holder for Original…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…
Print approx. €14.44–€17.65 excl. taxPreliminary estimate for PETGSource material: PET
This is a danman's remix Halloween Crow. I printed this in Prusa Galaxy Black PLA. Head is separated into two pieces. There are prepared holes for 5mm diameter LEDs and also CR2032 battery holder is included. Head is glued by two small…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Small stuck pieces of filament can easily be cleaned by this tool from smooth sheet steel. Special handy for the residue of PETG supports that hold very well. Print instructions Designed for this blades:…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
Nice looking, stackable shoe rack. I am using 8mm steel rods, but you can use also 8mm wooden sticks or M8 Threaded Rods. The length of rods (width of the shoe rack) is up to you. Print the pair of top parts, pair of bottom parts and as…
Print approx. €7.10–€8.68 excl. taxPreliminary estimate for PETGSource material: PET
The source model was created at http://jthatch.com/Terrain2STL/ , so you can create your own! Read how to create puzzles: https://blog.prusaprinters.org/print-your-own-3d-puzzles/ Print instructions Check the first layer. If the first…
Print approx. €15.76–€19.27 excl. taxPreliminary estimate for one variant
I used it as a motorcycle battery in JAWA 250/353 instead of leaded 6V battery. It saves a lot of place. Used cells are LiFePo4. Print instructions Printed from PETG or ABS
Print approx. €6.46–€7.89 excl. taxPreliminary estimate for PETGSource material: PET
Spare part: water valve lever
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print ground Fixing Pegs
Print approx. €3.86–€4.72 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant
This is a remix (check the original one also if you don't have ball bearing). I added a ball bearing 608. It works better when you are placing low weight close to the rotate point. Moment scale helps students understand moments and the…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant
Photo props - ideal for birthday shooting. Photo by: Hrabenka
Print approx. €7.38–€9.02 excl. taxPreliminary estimate for one variant
Simple DIN lock for Loxone Miniservers and Extensions
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Cylinder r = 100 mm h= 100 mm Can be used as skirt with 0% infill, 0% top and bottom layers and 1 perimeter.
Article with build instructions: https://blog.prusaprinters.org/dryboxes-and-alternative-spool-holders-not-only-for-multimaterial-upgrade/ Material: Prusament PLA Galaxy Black
r = 35 mm h = 100 mm
This topographical based 3D model has the shape of the The Czech Republic. How to do it? Read the article: https://www.prusaprinters.org/how-to-print-maps-terrains-and-landscapes-on-a-3d-printer/
Original model was designed by chendragon2099. Body is prepared for MMU2S. Filament 1: Body; Prusament PLA Galaxy Black Filament 2: Face + Tail + Belly; Prusament PLA Vanilla White Filament 3: Beak ; Prusament PLA Lipstick Red The drawer…
I use a scoop for scooping up wood pellets while cleaning a parrot cage :) Print instructions In the .3mf file, the scoop is separated into tho pieces (base and handle). STL file can be also separated by PrusaSlicer function Separate to…
The model is not properly scaled but could be used in H0 scale terrain model. Designed by Smetty Print instructions Probably the best way to print is using SLA technology.
3D map of the Prague Castle area. Available on three scales: 1:5000 1:2500 1:1000 How to print your local area? Read the article: https://www.prusaprinters.org/how-to-print-maps-terrains-and-landscapes-on-a-3d-printer/
Buffer space hook which allows screwing the buffer to the wall.
Would you like to know, how to create your own puzzles? Read the article: https://blog.prusaprinters.org/print-your-own-3d-puzzles/
Extension legs are useful when landing on grass. Print instructions Use supports ;)
Dimensions: 30 x 50 x 60 mm
Cube with edge length a = 100 mm
I recommend using a color change to color the ear.
Original model converted to 3D puzzle model. Colorchange print. Read how to create your own puzzles: https://blog.prusaprinters.org/print-your-own-3d-puzzles/
Cleaning out gutters is a miserable, messy, stinky job. Installing gutter guards could put that headache behind you. Print instructions ASA is an ideal material for outdoor usage.
Halloween-themed mini-pumpkins that fit on the filament inlet.
Would you like to know, how to create your own puzzles? Read the article: https://blog.prusaprinters.org/print-your-own-3d-puzzles/
Cooky lampshade. As a light source, I recommend using a 5V LED strip and powering it from USB.
Buffer space hook which allows screwing the buffer 10° angled.
TBD Print instructions Use PETG or PC filament.
Designed for Galaxy S10, but it is compatible with phones up to 75mm width. Electronics is from this charger:…
A simple example of powerful and useful modifier meshes in PrusaSlicer. It gives you an opportunity to easy personalize STL files. Read this tutorial to learn more:…
Jawa 175/250/350
Little Josef Prusa Character was used as a source model. Printed as multimaterial print on MK3S + MMU2S. Read how to create your own puzzles: https://blog.prusaprinters.org/print-your-own-3d-puzzles/ Print instructions Check the first…
Robot ETA 1023 shaft spare part (unašeč) Original part: https://www.nadeta.cz/ Part id: ETA 102370060
Aid for the examination of "sighting" eye dominance by the Dolman method.
The Czech Republic plates with numbers 1-25. Used for graduation from geography. It has the shape of the Czech Republic. Print instructions You can use colorchange.
Just screw it to the wall.
These are all currently available results.
