Counting matching models…
Here is the part that is missing from the MMU2 & MM3 kits. The thing often referred to as "the button" in the manual. The reset button. No more looking for something long and small to press the button with. Its a 4 minute print…
Self contained travel version of the classic Solitaire game. Lid has the name “Solitaire” for MMU printers. 32 pins needed to play. The 33'rd is a spare..
Wall mount for Makita 18V battery. Printed in 0.3mm lh PLA, 3 perimiters, 15% infill and supports suggested by Prusaslicer 2.3.1. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Infill: 15% Filament: PLA, PETG…
Logo for my Sony PVM-2130QM CRT Monitor. Print in black and silver. Measure the width of the hole in your PVM and scale the width of the model to match in your slicer and you should get a really nice fit.. Remember to post your “Makes”. :)
Designed for my i3 MK3 S to house a DC-DC stepdown converter so I could use 12v LED strips instead of 24v LED strip with SethBon's "Single LED Light Bar prusa i3 MK2/MK3"…
The button I could find on the internet for the FB-354 (not FZ-354) was supposed to be glued in place according to an ebay ad I found for it.. Not good enough.. Not good enough at all.. Totally reworked the model but let's call this a…
To protect the shell of my Tamiya M-05 Toyota Yaris GR RC car I created this front bumper assembly to hold a foam bumper like the one for the TT-02. foam could be cut to any shape to fit your shell. I used 5x6mm inserts for M3 screw and…
You need to install a threded insert in the center for this to work. Mine was 5x6mm.
Save the rain water for the garden. I chose to use a brass hose conector, instead of incorporating it into the model, to cut down supports to none, make it more durable and make it easier to print.. The conector can be found at Amazon.
For filament storage in IKEA SAMLA box. Also check out the free standing version https://www.thingiverse.com/thing:4804607 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament:…
Cover for BOSCH Holesaw, 26 to 64mm, (EAN 3165140415675) Please "Like" if you download. Print instructions Category: Tool Holders & Boxes Summary Cover for BOSCH Holesaw, 26 to 64mm, EAN 3165140415675 Print Settings Printer Brand: Prusa…
Big funnel on the inside to help with loading of the filament. Modeled for a M5 Festo fitting instead of the M10's Zcubed and Regis use for the PTFE..
Shell for my USBASP USBISP AVR programmer.. Used it to update the firmware of a Hydra 2 Scart switch.
Wallmount your repwinders. Two parts, long and short. Short takes one repwinder, long takes two. Combine for your number of repwinders. For a full MMU line up of five repwinders you need two long and one short cleat. Line up the parts…
Box for 5V powersupply with room for more electronics. Holder for Arduino Nano on the underside of the lid. Designed this for a Motion Sensing Under Bed Lighting. ( https://www.instructables.com/Motion-Sensing-Under-Bed-Lighting/ )
Hex key holder for the Prusa mk3 powersupply. Print upsidedown with detachable supports for the cleats and pegs for best result. The thin part should have 100% infill. You can use perimiters for this. Length of pegs might need to be…
Box for 5V powersupply with room for more electronics. Arduino or similar can be attaced to the lid. Please like if you download. :) Designed this for a Motion Sensing Under Bed Lighting.(…
Replacement knob for under floor heating in bathroom. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 100% Filament: Whatever PLA Any Category: Replacement Parts
Made the “Contest Winner” badge ontop of a Cherry MX keycap and printed it in Prusas “Oh my Gold!” filament. Edited.. made the details a bit taller..
Do you have to look for razors on the floor in the shower? Do you constantly drop your wifes razor when you reach for your shampoo? Then I have the solution for YOU. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports:…
If yours have failed like for Tested's Adam Savage. Mine was unfixable. I had to print a new one..
Got a Tetris Jr Keychain game as a gift. It was missing the battery cover. Created it from scratch. Gcode sys mmu but there are no color changes so just ignore the warning about that when printing on a non-mmu printer...
The inner hinge for the old version of Games Workshops Citadel hobby box. I'd paint on some supports on the "pegs" that hang out in the air just to be safe. 100% infill for strength.. Print Settings Printer Brand: Prusa Printer: I3 MK3S…
Replaces the “extenable” arm for the Linocell mobile phone holder with a longer, solid, arm that doesn't wobble. Printed in PETG. 4 perimiters, 15% infill.. Seems to hold it's shape even in a hot car in the summer. (Gcode seems to have…
My Vilfo VPN router ran a bit hot so I created a new ventilated lid for it. Supports needed to support the small square holes in the sides. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200…
Print it standing on its side or the catch will snap off like on the original cover.. I included pics of the remote and the TV to help you identify for what tv remote this is for.
Repwinder spacer and end cap for the 1kg spools with open sides of PLA from Clas Ohlson. Se picture for details.
Repwinder spacer and end cap for the 1kg spools with closed sides of PLA from Clas Ohlson. Se picture for details.
My Vilfo VPN router ran a bit hot so I created a new ventilated lid for it (https://www.prusaprinters.org/prints/64292-ventilated-lid-for-vilfo-vpn-router) This is a new version of that lid with a 60mm fan mount. Print Settings Printer:…
These are all currently available results.
