Counting matching models…
These models divide the small (red) Eurobox inserts into halves or quarters, this allows for more efficient storage of small parts. You need to import the STEP or STL files into your slicer and print them with 0 top layers, 0% infill and…
Cute bat. Print the normal version with a filament change, or print the MMU model with a MMU. Both STL and STEP files included. Cover photo with Makerbot glow in the dark ABS, regular black ABS and blacklight illumination.
You can print this with a conventional printer, but in the slicer you need to add a second extruder. You use an M600 command to swap filaments, see…
Print with 1 filament change. Photo: Prusament PETG orange under a blacklight.
This is to repair part 2040M0209 (and maybe 2040M0210) of AKG K240. It tends to break after some time. Print in PETG or ABS. No supports needed. Holes require minor filing. Glue the 2 metal rods of the headband into place. A cutout is…
This mounts a DS18B20 probe on a 2020 or 3030 profile. You can attach it parallel or at a 90° angle. There's two halves to prints, so that makes for 8 files. Assemble with two 2mm x 10 self tapping screw screw and a ziptie. If the probe…
These inserts roll into the extrusion profiles and keep the T-nuts from moving around. It suck when you're installing the enclosure and have to remove it again because the T-nuts slide out of reach. Only works for a specific type of nut.…
This project requires: Odroid M1 with 12V power supply 3.5" HDD, angled SATA cable, custom power cable 80mm fan with USB connector 14 threaded inserts (M3, 5mm diameter, 4-8mm long) 10x M3 x 10mm screw 4x M3 x 16mm screw 4x Mx30mm screw…
Print with 85A or 95A hardness TPU. Model was printed with Ninjaflex (85A). Scale the model until the fitment of the bits is good.
2 simple filament changes to print this photo with neon filament and blacklight :)
Replacement strain relief for AKG K242HD. Print in flexible or semi-flexible material. Where the cable enters the headphones, make sure to prevent the cable from sliding back out of the headphones. You can do this by wrapping the cable…
Use M3 self tapping screws to install the smoothieboard V1. Mounting holes for the bracket are for countersunk screws, diameter 3-4mm.
These models divide the trays of Perel organizers (OMRC13) into halves or quarters, this allows for more efficient storage of small parts. You need to import the STEP or STL files into your slicer and print them with 0 top layers, 0%…
These are all currently available results.
