Counting matching models…
Adjustable phone mount for the Moza R5, R9, and R12 wheel bases. Can be set at 6 different heights and can be adjusted to hold phones up to 175mm x 13mm. Uses M4 hardware for assembly and M3 to mount to the base. Note that…
I designed this to hold 5 different grits of sandpaper for my 5" random orbital sander. Each one is labelled for easy identification. I can customize it if you have different grits, just let me know. Also has two holes in the rear for…
Simple bracket to mount the R9 power supply to an 8020 aluminum chassis. Uses M6 hardware and is a snug fit so no rattling. If you'd like to donate for my efforts, you can do so here. 🙂…
Designed this for holding dry mix sauces and gravy. If you'd like to donate for my efforts, you can do so here. 🙂 https://www.paypal.com/donate/?hosted_button_id=CDX7C23F9L8X4 Print Settings Printer: Ender 3 V2 Neo Rafts: No Supports: No…
Simple bracket to mount the Nobsound power supply to an 8020 aluminum chassis. Uses M6 hardware and is a snug fit so no rattling. If you'd like to donate for my efforts, you can do so here. 🙂…
Remixed this from https://www.thingiverse.com/thing:6122834 to split the plate more evenly so it can be printed on an Ender 3 V2 Neo. Also adjusted the length by 2mm as original was noted to be 2mm short. Print Settings Printer Brand:…
Designed this to mount a TrackIR to an 8020 aluminum profile rig for sim racing. Place the sensor upside down in the holder and invert the settings 180 degrees in the TrackIR software for it to track properly. Uses M4 hardware to attach…
Customized version of https://www.thingiverse.com/thing:682146 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=682146 Instructions Using the following options: spoon_shape = 3 volume_1 = 1 unit_volume_1 =…
I needed a battery storage option for a lower profile drawer and almost every battery storage option I found had the batteries standing up so I designed one that allows them to lie flat. I gave a few mm clearance clearance to allow for…
Designed this to mount a Dayton TT25 to the Moza SR-P brake pedal. In theory, this should work for accelerator and clutch pedal as well. Print Settings Printer Brand: Creality Printer: Ender-3 V2 Neo Rafts: No Supports: Yes Resolution: .2…
I created this specifically to hold the UniTak3D Ender 3 3D Printer LED Lights found on Amazon here https://www.amazon.ca/dp/B0B7B1QG5Q?psc=1&ref=ppx_yo2ov_dt_b_product_details . I didn't like the way they just laid in the gantry rails so…
I found an adapter on here similar to this but it was shorter and not as smooth of a transition so I made my own. Allows you to attach the sander to any hose that has a 30mm outer diameter. Print Settings Rafts: No Supports: No…
Customized version of https://www.thingiverse.com/thing:682146 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=682146 Instructions Using the following options: spoon_shape = 3 volume_1 = .75 unit_volume_1…
Simple hanger to hold 2 1/2" Shop Vac tubing. Print Settings Rafts: No Supports: No Resolution: .2mm Infill: 20% Category: Tool Holders & Boxes
Customized version of https://www.thingiverse.com/thing:682146 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=682146 Instructions Using the following options: spoon_shape = 3 volume_1 = 1 unit_volume_1 =…
Tweaked Jarek_iRek's design a little by making it a snugger fit and adding a different mounting option. Print one for each end of the power supply. Print Settings Printer Brand: Creality Printer: Ender-3 V2 Neo Rafts: No Supports: No…
This is a remix of Schorsch3000's remix which can be found here: https://www.printables.com/model/1036580-gridfinity-bin-for-the-upgraded-nimbot-d110 . I added 4 compartments to be able to store rolls of labels to keep everything in one…
The original rods didn't line up well with my base plate position so I tweaked the rods a little by shortening them and adding a twist to make them sit flush in the brackets. This solution was needed for mounting my Moza R9 with the base…
Customized version of https://www.thingiverse.com/thing:682146 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=682146 Instructions Using the following options: spoon_shape = 3 volume_1 = .75 unit_volume_1…
Created an adapter to allow a 2.5" dust extraction hose to be attached to the dust port on the Ridgid R4210 miter saw. May work with other saws I don't know. 62mm OD for hose, 37.75mm ID for dust port. Print Settings Printer Brand:…
Anyone that has this bandsaw knows that while it's nice that this affordable saw has guide bearings, the bracket for them is too deep making the bearings to far forward and allowing them to come in contact with the blade teeth. This part…
Foam must be removed for these to fit properly. These are held in place via zip/cable ties. Larger one is designed for the front and smaller ones can be printed for the sides. I had to use smaller ones to work around my custom pedal tray…
I really like this set that was made by BoDaddy but it didn't have any spot for Torx or swivels so I made my own. Print Settings Rafts: No Supports: No Resolution: .2mm Infill: 20% Category: Tool Holders & Boxes
Designed to attach a 2x4 to the pedal tray for custom pedal mounting. Hose clamp method seemed like the best solution and works with a 100kg load cell brake as tested. Note the foam has to be removed for these to fit properly. Print…
These are all currently available results.
