Counting matching models…
The original broke so I printed a pair of those brackets. The cable (connecting left to right speaker) constantly moved between bracket and my head, resulting in uncomfortable pressure points above my ears. Therefore, I remodeled the…
Small angle bracket to connect to 2020 aluminium profiles (slot 6, but should work with slot 5 as well). Hole depth is 5mm, so M5x10 work fine with slot/hammerhead nuts. Printed on the side with 100% infill for max. stability.
Connects 2020 aluminium profiles with two M5x10 cylinderhead screws Print with 100% infill for max. strength.
Easy to print. I used a 0.6 nozzle with 0.2 layers. Infill and perimeter walls are not important. Stick to wall with double-sided tape or screws in the middle. Multimeter is mounted by sliding it on the holder from above. Can be…
It's a replacement for (in my case broken) car key body. Coloring Just stop the print after 4.4mm printing height and change the filament for the next 0.4mm. before changing back to the initial color for the last 0.3mm. I attached a 3mf…
Hole depth is 6.5mm, so it can be used with M5x10 cylinder head screws. Print on side for max. strength, upright for optimal optics of outer curves. Handle width is 20mm, so perfectly fits onto 2020 aluminium profiles. “Foot” size is…
Required for assembly: 5x 3x1mm round magnets for holding the bits (opt.) 2x 19x10x2mm rectangular magnets for mounting the toolholder to the drillstand superglue or contact cement Assembly: glue in round magnets into the bottom of the…
Its a holder for magic wands, fitted to an older IKEA shelf. I know, thats not quite universal. But the required changes in thickness and hole distance are easy to make. The bottom part has two sides. The one with the center hole is for…
I used the Bosch Professional Accessories 2608522363 box for around 8€. https://www.amazon.de/gp/product/B01N23C3ON/ I got a few of those boxes to organise the stuff for my mobile tools. I will add more trays as I design and test them.…
Its a holder for lightsabers, fitted to an older IKEA shelf. I know, thats not quite universal. But the required changes in thickness and hole distance are easy to make. The bottom holder is very sturdy and holds heavy sabers with…
The INDX FE and Prusa Edition each have got a nozzle seal per tool made from flat spring steel and a silicone sleeve. The spring can be ground out of 0,3mm flat spring steel. A width of 8mm is ideal; 10mm stock can be easily ground down…
Had extruder issues after a setup change to USS dryboxes, because non Prusament-spools, especially paper spools, were to hard to pull out of the box, causing several problems like the PFTE tube getting pulled into the box or the extruder…
This is a set of top and bottom brackets to build a robust but lightweight inlet for the Enders Alubox Toronto 63l. With the provided measures, you can fit three inlets into the box. You need: 4 of both models bracket_v2 has screw holes…
These are all currently available results.
