Counting matching models…
Here is a 3rd hand helping tool to solder XLR on the field, I've been working on a couple of remote gig when it is not possible to bring heavy tools, this is just perfect for me, put it in your bag with a butane soldering iron and you're…
I've modified this hook to fit on Kadis panel, this way I'm putting all my studio cables (XLR,CAT5,¼ etc) headphones…. on the panel instead of using hook fix in the wall.
A simple contour tool to trace out guitar or bass body. Printed with PLA, nothing fancy here. Print one screw on each side to adjust your pencil in the center position.
This is a Skadis holder for your Stanley FatMax cutter. I've printed it with Tough PLA.
One thing I hate most then Christmas is to install #$%?& lights on my tree outside... I've come up with a hook that you can install on a painter pole, it is still burden but without less swearing.... The Grinch! Print Settings Printer…
Hi! This is my wood pedalboard mounting bracket for a CIOKS DC7 if you plan to install it under like I did. Hope you enjoy!
Dust Cover for Alpha 16mm potentiometer, was tired of ordering theses parts. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: PETG PETG Category: Electronics
Got some OMLOPP strip LED installed in our kitchen, it was hot glued but with the heat it fell so I've made this clip on holder by looking at the mounting hardware that WAS NOT include with the LED strip... Version 2 I've changed the clip…
Here is a Templeboard quick release plate for a 1590 small enclosure. Printed with tough PLA, infill 20%
Audio Stereo XLR VU meter made with JLM parts. Meter - SEW 475 VU Meter https://www.jlmaudio.com/shop/sew-475-vu-meter.html VU2 Stereo VU Buffer Kit https://www.jlmaudio.com/shop/vu2-stereo-vu-buffer-kit.html I design it so that you have…
This is a pegboard battery holder for a Worx lawn trimmer. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: Yes Infill: 20% Filament: Canadian Maker series Tough PLA Black Category: Outdoor & Garden
This is a plate for a 125B enclosure to mount on a Templeboard with knobs
This is some brackets to install a Morningstar ML10x audio switcher to a Templeboard. I didn't want to use the glue on plate so I've designed this system. Just use some M4 brass inserts in the brackets holes and you are good to go.
Hi! I don't like using velcro on my pedalboard so I design that clip that fit under the pedals. Since there is a bunch of different enclosures I made a generic layout in Fusion 360 that you can edit, it's under Thing Files, I've put my…
Just a basic GoPro adaptor for Manfrotto tripod…that's all.
I wanted a clip to attach my Sparkfun Redboard to my protoboard. I've printed en PETG so it won't break when I slide it on the side of the board. Sparkfun Redboard: https://www.sparkfun.com/products/13975 Print Settings Printer Brand:…
Here is a Bluetooth page turner to use with a iPad (ForScore) when you are reading music charts, I wanted to use a BOSS FS6 case but I ended up drawing it instead. I've added a bottom layer made out of Ninja flex so it can stop slipping…
Hi! I wanted a really small footprint keyboard stand for my Arturia Minilab Mkii so to build that I've used a cutting board and an old lecturn (chart stand) that I unscrew the top end. All the corners are printed with tough PLA the bottom…
This is just some little plugs when you transfer a guitar or bass neck to a new guitar or bass body. Just print them 100% infill so when you'll push the neck into the body they won't crumble down. I've used tough PLA on this one.
This is a clip to fix a DOD expression pedal to a pedalboard, I didn't like velcro on this pedal has there is 2 screw on the back that prevented velcro to really hold it tight. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts:…
I'm building a pedalboard and I was needing a template for my router for a Leviton 5239. Made the design with Fusion 360 Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category:…
Made some alignement blocs to cure my OCD when I try to align my pedal straight on my Templeboard pedalboard. Just print a couple of them, 4 of each and it will help you align your pedals when you'll center them down on your Temple glue…
Hi! I've lost my cap on my Badger 105 airbrush so I decided to make one. I've printed it with TPU and without support so the look is not that great but it fit snugglier then the original that I lost.
Here's my take on Templeboard quick release plate, this one is for a 1590 Hammond case. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Any Tough PLA Black Category: Music
It is a clip to fix a Morningstar MC6 to a pedalboard. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: MG Chemical PETG Black Category: Audio
This is a Templeboard hole filler when you use screw on plate and you want to us a hole as a fixing place. Screw on plate here: Templeboard-125b-plate
This is a side clip for a QSC K8 speaker so you can mount microphone, shotgun for crowd mic in my case. Was made in Fusion 360. You will need to M5 (at least 3cm long) screw to screw it on the side. Print Settings Printer Brand: Prusa…
A 3rd hand for soldering stompbox parts, this is GREATLY inspired by the Pedal Port - Pedal Building Third Hand. I've printed mine with tpu so it is stretchable a bit when you insert PCB or cables to solder.
This is a rig to simplify testing your pedal with a signal generator and oscilloscope. Category: Audio
These are all currently available results.
