Counting matching models…
Okay, so the box I made for wrangling all the little packets and spice bags in our kitchen cupboards ended up being a bit flimsy for the job. But rather than abandon it, I thought I'd try making some reinforcements and send this soldier…
When printing parts for the excellent honeycomb wall storage system , I like the fit to be fairly snug - sometimes too snug for a simple press-fit to get them into the grid. When that happens, I reach for this simple tapper/set tool that…
For a while, I was hanging each tool on its own hook, but that takes up too much space on the wall. So I designed a simple bar with little sockets that fit snugly with my set of pliers, and keeps 6 of them in the same wall space that…
I loved the look of The Back Scratcher but found that those tiny points didn't offer as much scratching satisfaction as I wanted. So I replaced the focused tips with wide blades for maximum scratchage. And then, while I was at it, I threw…
Requires: 2 skateboard bearings and a bucket. Out of the box, it's designed for 608 bearings (22x7mm) and a standard 5-gal shop bucket, but the parametric OpenSCAD file can generate variations of any length and diam, so you can adapt it…
When Ogg (my YouTube caveman muppet ) dresses to impress, he feels naked without his trusty spear at his side. But where is a caveman awakened in the modern world going to find a spear? He's going to 3D print one, of course. But he's also…
For many years, I used a Flow-Bee haircutting tool, but eventually, the blades got dull and they can't really be sharpened. So rather than buy a new one that would eventually suffer the same fate, I designed an attachment for my hair…
I've seen a variety of methods for printing reinforced drywall anchors, but haven't found one that printed reliably on my printer and did the job. So I've borrowed some ideas from those other places and created my own version in OpenSCAD.…
Some friends moved into a new house and still have a sheet of paper hanging in the front window with their street number on it. They're looking for an unusual but legible way to display their street address, so I designed these to be hung…
As part of a major bathroom reno, we wanted to add robe hooks to the back of the door, but I didn't want to spend hours hunting for something that would complement our new fixtures, so I just built these myself. They've been in service…
Space is at a premium in my lab, so I keep my multimeter in a drawer and only pull it out when I need it, but it always seems to emerge with 8 other things hopelessly entangled in the cables. This wrangler clip solves that problem for me.…
My old PLA case kept getting damaged. The layers would separate if it got snagged on my pocket, or crack if it bumped too hard against my desk, so I treated this as an excuse to get into TPU filaments, and designed a case that would fit…
Whether you're trying to balance a laptop on your knees or just need somewhere to park your TV dinner, a lap desk can be a handy solution to a frequent irritation. But laps, chairs (and bellies) come in a million different shapes and…
Every time I build a little electronics project, I hate how the components usually just rattle around in the case. So I designed this customizeable solution in OpenSCAD that lets me configure the number of pins, the sizing and spacing,…
All the lovely rocking motion is kinda pointless if the decorative mobile keeps bashing the baby in the face. But insert this little adapter into the socket before inserting the mobile arm and you can move that dangling toy right back out…
Several years ago, I got tired of constantly having to stoop down to put on my shoes. Tying laces just feels so… Medieval. For a while, I experimented with a variety of "stretchy lace" solutions, but they were far more expensive than…
Originally created as a Secret Santa gift for a panda-obsessed friend, this little guy makes a fun statement on any fridge. The six individual magnets can be scattered around the fridge to do their job, and when there's nothing for them…
I don't carry many keys, but there are three that I do need with me at all times. Unfortunately, those few keys have scratched a couple of expensive phone screens over the years, when I've inadvertently jammed them together in the same…
A customizable, strong handle for a snow shovel. Replace a broken one, or just make it fit your hand better to reduce fatigue. Print Instructions I printed mine in PETG to reduce brittleness in frigid cold. (-40 is hard on PLA.) 5…
Like every other newb, I bought one of those “1500 assorted resistor packs” online when I started my e-tinkering journey. Since then, I've spent months digging through the collection, trying to find the value I need while those little…
I'm building out a new (but tiny) workshop and need a way to organize all my cables and cords. After trying a few other TPU cable ties, I didn't find what I was looking for: minimal filament required, a solid feeling snap, easy release,…
I liked the concept of @Kimframes spool but wanted to build my own parametric version so I could customize for wall-warts/chargers and make different sizes. I added a solid core to the center of the spool and gave it two slots so you can…
You know those broom clips that mount on the wall? I've never liked them. Not just the fact that they often break, never seem to be the right size, and that you've got to drive screws through perfectly good drywall to mount them, but what…
Run. Flip. Repeat. FlipGrip is a tiny keyboard that fits in the palm of your hand and has just one job: flip the pages of your book while you're running. (Or the tracks of your music/video playlist.) I like to read on the treadmill. For…
I looked at about a dozen different models but most of them were too bulky for me. I need to print dozens of these things, so I wanted something that wouldn't tie up my printer all day. This design not only prints like a dream, but like…
Making videos is just a hobby for me, so to keep it from sucking up a lot of money, I try to make do with things I already have. Case in point: I recently needed to add a rim light to my studio setup, so I wondered if I could improvise a…
I don't use my tablet very often, but when I want it, I usually want it now . So keeping it tucked in a drawer or jammed into the closet doesn't work for me. And if I leave it lying on the desk or table, it will invariably be buried under…
FirstBox is a standardized, parts box designed to stand on end like a book on a shelf. Instead of stacking awkward plastic organizers in unstable piles, FirstBoxes line up neatly with readable spines, making them easy to identify from…
Built around an empty filament spool, MajorDomo is a small geodesic dome lamp that sits by the door and answers one very practical question: "How should I dress to go outside?” You can never tell just how warm or cold it is just by…
These are all currently available results.
![Veloci-Straptor - Fast cable ties [OpenSCAD]](https://media.printables.com/media/prints/8a3102c6-ec42-4d10-b90a-7d9f7da67113/images/11366850_d853a853-24f2-4fda-9cd2-5d36c2e79ac1_bcd7f182-02e1-4189-8c97-fb3467d918c9/velocistraptor3.jpg)
![FirstBox - Small-parts Storage System [OpenSCAD]](https://media.printables.com/media/prints/8c7904b7-0cf1-43db-9214-a90cc8058aaf/images/11813805_e4857e8c-fb86-445a-8be4-1df0ea97836d_36fd7466-353f-48f4-82d1-eb99bedd5794/img_20260123_104145.jpg)
