P
PrintablesMD_CAD_Creation
120mm Fan Cover
This is a simple 120mm Fan cover Print Settings Resolution: 0,2 Filament: Sunlu PLA Category: 3D Printer Parts
- Downloads
- 605
- Likes
- 39
- Rating
- 5
All models
Counting matching models…
P
PrintablesMD_CAD_Creation
Airsoft Spring Loaded BB Grenade (67mm)
This an Airsoft Spring Loaded BB pellets grenade. 67 x 94mm For maximum spreading performance, load it with 50 to 60 BB (30 on each side max) Printed in PLA matte Sunlu 0.2mm layer height 0.4mm nozzle 4 Walls Thick 20% Infill Support…
- Downloads
- 583
- Likes
- 79
- Rating
- 0
P
PrintablesMD_CAD_Creation
ENDER 3 V3 SE/KE FEET (use the original Rubber feet)
Those are 30mm feet for the Ender 3 V3 SE and KE to improve the motherboard and PSU cooling. They use the original rubber foot. You can print them in two parts per side on the ENDER 3V3 SE/KE or in one part per side on a bigger printer…
- Downloads
- 540
- Likes
- 125
- Rating
- 5
P
PrintablesMD_CAD_Creation
ENDER 3 V3 SE 5020 FAN DUCT
This is a Remix Of the 5015 version. I made it compatible for a 5020 Blower fan. You can also find a file to replace the Hotend fan by a 5020 blower. I also made a box for a PCB to regulate the PWM signal noise but it it is compatible…
- Downloads
- 226
- Likes
- 42
- Rating
- 5
P
PrintablesMD_CAD_Creation
ENDER 3 S1 PLUS Gantry Reinforcement
This is a design to reinforce the Z axys Gantry on the Ender 3 S1 PLUS to minimize wabble. You need to print the Top Left and Top Righ part as well as one pf the 3 available versions for the bottom parts: V3 fits the stock printer (might…
- Downloads
- 143
- Likes
- 41
- Rating
- 0
P
PrintablesMD_CAD_Creation
Beauty Blender Transport Case
This is a transport case for my grilfriend's Beauty Blender. It allows it to dry will remaining clean during travel. Printed in ASA and acetone smoothed Print Settings Rafts: No Supports: Yes Resolution: 0,2 Filament: Flashforge ASA…
- Downloads
- 109
- Likes
- 17
- Rating
- 0
P
PrintablesMD_CAD_Creation
IKEA STRIMSAV LED SPOT Support with clips and screw
You will need: 1x support 3x clips 1x Screw Printed in 0.2mm layer height with 0.4 nozzle
- Downloads
- 98
- Likes
- 10
- Rating
- 5
P
PrintablesMD_CAD_Creation
PLA 95mm Lid For Yoghurt, Puddings and Others
Designed to be printed in hard plastic such as PLA or PETG 0.4 Nozzle Layer Height: 0,2 0,24 or 0,28
- Downloads
- 98
- Likes
- 14
- Rating
- 5
P
PrintablesMD_CAD_Creation
ENDER 3 S1/PRO/PLUS ZERO Offset Y SUB 34mm Offset X BL-Touch Modular Cooling Solution
!Zip with all files listed below exemple file! This a Modular Cooling Solution to get the BL-Touch closer to the hotend. With those fan ducts, the BL-touch is now Zero offset on the Y axis and Sub 34mm from the hotend output on the X axis…
- Downloads
- 96
- Likes
- 22
- Rating
- 0
P
PrintablesMD_CAD_Creation
ENDER 3 S1 PLUS Bottom Plate Honeycomb 120/60mm fan
This is a Hoenycom Bottom Plate for the Ender 3 S1 PLUS to help with coooling on the motherboard and the PSU. Available for the 60mm original fan or to install a 120mm fan for quiter operation. Compatible with the 70mm foot and the PSU…
- Downloads
- 79
- Likes
- 21
- Rating
- 0
P
PrintablesMD_CAD_Creation
Lithophane STRIMSAV IKEAK LED SPOT
Lithophane STRIMSAV IKEAK LED SPOT Compatible with 15x11 cm and 15x10cm 60° vertical lithophane. The support is in two parts so you can use the top part and adapt it to another lithophane support. The spot is attached with clips (stl…
- Downloads
- 78
- Likes
- 11
- Rating
- 0
P
PrintablesMD_CAD_Creation
Curtain Tie (Print in Place)
This a Curtain Tie with an hinge that you can print in place. You must add supports for the little loop. Size: 60mm IN, 70mm OUT
- Downloads
- 66
- Likes
- 5
- Rating
- 5
P
PrintablesMD_CAD_Creation
ENDER 3 S1 PLUS FEET (with original Rubber foott), PLEASE READ DESCRIPTION
Please Read descritpion before printing Those are 70mm foot for the Ender 3 S1 PLUS to help with the motherboard and PSU cooling. They use the original Rubber feet. NOT COMPATIBLE WITH ORIGINAL BOTTOM STEAL PLATE. I made a Honeycomb…
- Downloads
- 57
- Likes
- 12
- Rating
- 0
P
PrintablesMD_CAD_Creation
TP-LINK DECO X50/X60 Cooling Fan Add On
This design was made to prevent my DECO X50/X60 from overheating. It alllows a 60x15mm 12V fan to fit inside. This fan can be powered by soldering it on the 12V power socket on the motherboard of then DECO router. I personnaly used a…
- Downloads
- 40
- Likes
- 9
- Rating
- 5
P
PrintablesMD_CAD_Creation
ENDER 3 S1 PLUS Light Spacer to fit Ender 3 MAX/CR10 Light
There is no specific lightbar that fits the Ender 3 S1 PLUS. Those are Two little spacers to fit the original Creality Light for Bigger printers on the Ender 3 S1 PLUS. Just Print one of each and you are good to go to screw the light on…
- Downloads
- 37
- Likes
- 15
- Rating
- 5
P
PrintablesMD_CAD_Creation
PSU COVER 6015 FAN
This ia a HoneyComb PSU COVER to replace the original cover. Compatible with 60mmx15mm fan or slimmer. Fits most of the 3D printers Post-Printing For the installation you will need: 4 M3x4mm inserts 4 M3 x 6mm screws Category: 3D Printer…
- Downloads
- 31
- Likes
- 4
- Rating
- 0
These are all currently available results.