Counting matching models…
This is my own design for a filament spool holder to be put on a roof or wall. UPDATE 07-26-2019: Added version 2, beefier build UPDATE 04-15-2021: Added version 3, more beefier build and extended the base to reach the mount screws more…
A nice LED light bar mount for a Prusa I3 MK3S printer, should fit on previous printer versions (MK2, MK2.5, MK3). It's based on previous work from "Gigante" user ( https://www.thingiverse.com/thing:3316724 ), but his arm lenght was too…
Summary A clamp for holding an extension USB cable on the vertical 3030 extrusion of the Original Prusa Mini. It uses two M5 sized 3030 Tnuts. Print instructions Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm Infill: 15%…
I bought an USB variable voltage regulator from Aliexpress (source: https://www.aliexpress.com/item/33008113832.html ) and designed a case for it using Autodesk Fusion 360 Print instructions Category: Electronics Print Settings Printer…
This is a direct measured model of the stock door lock knob of a BMW F20 car designed on Autodesk Fusion. Used 70% of speed to get a very decent print. Print instructions Category: Automotive Print Settings Printer Brand: Monoprice…
This is a compilation of things in order to upgrade (or build) your Prusa I3 MK3S with MMU2S and Bondtech BMG extruder kit for MK3. I used the Bear X-Carriage with an adaptation for the Bondtech extruder and MK3S filament sensor (source:…
If you are installing a dropper post with internal cable routing on your Scott Genius 740 bike you'll need this cover. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: eSun…
Remixed to fit a 5020 blower Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Unbranded ABS Yellow Notes: Print it at least on ABS, best on Polycarbonate Category: 3D…
This is a case for the Altera Cyclone II EP2C5T FPGA board EDIT 08-09-2019: Updated design, now the holes and inline with the ones on the PCBs, download v5. Print instructions Used the enforcer slab option for the support region (the JTAG…
I installed the AL-BMG air extruder from Trianglelabs on my Creality Ender 3 Pro printer, the fan shroud that came with the kit doesn't fit properly, it sit far from the nozzle. I enlarged the shroud using Fusion 360. Print instructions…
Designed this thing for those sauce sachets that came with food deliveries Print instructions Category: Kitchen & Dining Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 0.3 Infill: 20% Filament:…
I made only the arm that attaches to the Prusa I3 MK3S bed, the Raspberry Pi Camera enclosure was made by dragsterbox and the swivel was made by Cornflakesninja ( https://www.thingiverse.com/thing:2956323 ) Other reference design:…
Modded the cable clip from here: https://www.thingiverse.com/thing:2590682 in order to have additional support for a 2mm straps, you can carry a spare tube, an additional water bottle or anything you want. EDIT 25/01/2022: Added two more…
This is a lid (cap) for a condensed milk can which measures 75mm of diameter. Print instructions Used PETG filament to print it using default settings on Prusa Slicer 2.0
A remix case from: https://www.thingiverse.com/thing:4364784 It will hold up to 12 minidiscs without its case Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm Infill: 30% Filament: Esun PLA+…
This is a remix from thing 2577717, modded for fitting bowden tubes on both ends, specially if fitting on top of the extruder. Print instructions Category: 3D Printer Parts Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
I've created this shim (spacer) to fit a cover for the Noctua fan of my Prusa I3 MK3 printer, with this thing the cover sits flat on the fan. For the fan cover, I used this thing: https://www.thingiverse.com/thing:2917644 Print…
For added protection to your precious Terminator 12 powerbank from YZXStudio. Two parts that goes one on the top and the other on the bottom of the device. Printed on Esun PETG grey colout filament, 0.2mm layer height, 5 perimeters, 5 top…
An enclosure for the bare mainboard of a Vivotek IP7135 IP Camera done on Autodesk Fusion 360 Print instructions Done using Autodesk Fusion 360, sliced using Slic3r PE and printer on a Prusa I3 MK3S printer on PLA material
These are all currently available results.
