Counting matching models…
This is a 3x4 gridfinity usb cable organzier for 12 x cables . The diameter per cable is approx. 12mm. Have fun and don't forget to post your makes :-) Check out my other designs and follow me for more.
Ikea skadis Storage box for Zip Ties / Kabelbinder. Box inner-height: 12cm, 15cm, 18cm, 20cm On the pictures you can see Version 1. Version 2 comes with rounder edges to improve stability. I printed mine with a 0.6 nozzle and 0.4 Layer…
An extendable track for your marble run compatible with Gravitrax. Depending on the height, the original rails were always a little too short. With this track you can adjust the length variably. Print instructions: You can print it…
Just a hook that uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . Alternatively, you can also use the Skadis M3 threaded T-Nut system. For most items I use the IKEA Skadis simple key hook but for more heavy things I wanted a…
DIN Rail Cover This cover is designed for DIN rails and comes in various widths. If needed, the strips can be easily trimmed by hand or by using a knife. Print instructions: Layer Height: 0.2 mm Nozzle Size: 0.4 mm Prints flat on the bed…
Hammer hook to be mounted on Ikea Skadis board. It comes in two parts, one flat, one angled. It uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . M2 T-Nut , M2 nuts and M2 x 12mm screws are needed for mounting. For more ikea…
As I have already printed some battery beer crates I wanted to use them with gridfinity. For this I created this 3x2 base , which can hold 2 beer crates. I have used these crates , others should have the same dimensions. Have fun and…
Just a simple screwed Battery holder für ikea skadis using T-Nuts. Thanks for the inspiraton to this model and Fr3d . There is one Version with T-Nuts Aligment Guide and one without. I printed it with some supports as shown in the…
To simplify the filament change I have designed the NoTube Filament Guide for the M5C. With this you can remove the original filament tube so you can use wider filament rolls on the original holder and don't have to deal with the tube…
I have designed this simple Ikea Skadis holder for Knipex and other pliers. The maximum plier dimension is 40mm and all my Knipex pliers are fitting great. M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. The holder uses the…
Remix of the Parametric SKADIS Board Generator for my ikea platsa 3d printer enclousure. The existing holes of the Platsa cabinet can be used and there are already spacers in the model. For more Skadis add-ons, check out my other models…
I needed a spacer for the reinforcement of my ring beam. It is designed for a 9mm rebar and provides a spacing of 25mm.
This is a big gridfinty baseplate. I printed mine on my Anycubic Kobra 2 Max with 42x42x50cm build volume.The 10x10 and 10x7 fit perfect for my ikea malm drawer. Have fun and don't forget to post your makes :-) Check out my other designs…
T-Nuts Holder for 11 wrenches for ikea skadis pegboards. Part 1 is for 5 wrenches / 22-32 Part 2 is for 6 wrenches / 6-16 What you need: 4x and 3x M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. The holder uses the T-Nuts…
Simple Holder for your Headphones Ear Protection. I use it with 3M Peltor X4A ( amazon ) The mount uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . There is also one Version without T-Nuts Alignment Guide. I used some…
Simple torque wrench holder for a hazet 5122-2 CT and others. The inner diameter is 23mm. The holder has a deepening on the back to make the wrench fit better and lies flat. I printed my holder with 4 perimeters and a little support on…
Simple magnetic holder for Wera 967/9 Torx Allen keys. Magnets work great as press-fit for me. The original Wera keys magnetic mount for wera 950/9 hex keys from jcq was too big for the smaller torx 967/9 allen keys, so i created this…
This is a polygon design plant pot with a saucer. The inner diameter is approximately 175mm and the height is about 170mm . It is quick to print as the outer shell is 1.2mm thick, requiring 3 perimeters with a 0.4mm nozzle and 2…
This is a remix of Ikea Skadis Wera keys magnetic mount from jcq for Wera 950/9 Hex-Plus allen keys. I have remixed the original design to use it with screws and the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . I prefer a screwed…
I am running out of space on my Skadis board so I had to design this compact pen holder. As allmost all my skadis add-ons , it uses T-Nuts for Ikea Skadis Pegboards system from 6d6178 . It is made for 3 pens with a maximum diameter < 12mm…
I have designed a simple rotating platform to make videos of my 3d prints. All that is needed is a small electric motor, 3 beerings and 2 screws. Parts: Print both parts in your color of choice. The two parts are very easy to print and…
Hook for a 60-65mm diameter ruber mallet to be mounted on Ikea Skadis board. It uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . M2 T-Nut , M2 nuts and M2 x 12mm screws are needed for mounting. The hook prints easily without…
Just a simple ixo Bit-Set holder for ikea skadis using T-Nuts. What you need: M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. The holder uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . For more Skadis…
Simple 4x1 gridfinty holder for up to 8 USB chargers. Thanks to Flo Cmli for the original design . I made a version 1 grid longer than the original. Have fun with it! For more Gridfinty check out my other models .
A holder for a Metal Saw or other items. Maximum width < 15mm What you need: M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. The holder uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . For more Skadis add-ons,…
This is a longer version of the straight rails and they are compatible with Gravitrax. They are 420mm long and i printed them on my Anycubic Kobra 2 Max. If you don't have a large printer, check these extendable rails i made which you can…
This is a remix of IKEA Platsa 120mm fan with filter to use a bigger 140mm fan and a 20mm filter. 20mm Filter ( amazon ) 140mm fan ( amazon )
A magnetic holder with 1 magnet for ikea skadis. There are 2 Versions of this holder: The version without screws is based on the IKEA Skadis simple key hook and comes with a loose and a tight version. The screwed version is based on the…
Just a simple mount for a RockShox Fork/Shock Pump. You can use the T-Nuts for Ikea Skadis Pegboards system to mount it to ikea skadis. I didn't add the T-Nuts aligment guide so you can align the holder so the pump hangs straight. For…
Simple wire brush holder for a Hazet 2131 wire brush and others. The inner diameter is 12mm. What you need: M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. The holder uses the T-Nuts for Ikea Skadis Pegboards system from…
A holder for a big wrenches or other items. Maximum width < 12mm What you need: M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. The holder uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . For more Skadis…
A simple mount for attaching a sensor to a Hörmann LPU42 garage door. I used a Sonoff sensor and a neodymium magnet. It works great. Sonoff Door Sensor ( amazon ) Neodym Magnet ( amazon ) Take a look at my other models and leave a comment…
A magnetic holder with 4 magnets for ikea skadis. For the first version, printing must be paused and the magnets inserted during the print. There is also an open version where the magnets are glued in later. The open version is stronger…
This is a little add-on for your halloween pumpkin tealight or any other tealight. Since I had fluorescent glow in the dark filament lying around, I came up with the idea of creating an insert with the glowing filament instead of using a…
Unfortunately, my Inter-Tech 4U-4408 server case does not have a 5.25 bay. So i made this mount to insert a 2x5,25" Icy Dock ToughArmor MB508SP-B. It fits into 2x 5.25” drive bays and you have to cut a hole into the frontplate of your…
As the inner part of my siphon in my shower was broken, I quickly designed a new one. The outer diameter is 85mm , the height 59mm . I printed it upside/down in PETG with some support.
I have designed this small box to mount an ekey home FS IN 2.1 BT finger scan in a wall. The screws supplied can be used to mount the finger scanner in the box. I printed it in PETG and the fingerscan fit in perfectly. There is a hole in…
I had lost the original holder so I designed this one. It is for mounting the Logitech QuickCam Pro 9000 to an Asus monitor. The original Logitech screws can be used.
I didn't have the right vacuum cleaner bags around and designed this adapter. It allows the use of bags with a 60mm hole.
These are all currently available results.
