Counting matching models…
Just a simple MagsSafe phone stand with the infill visible. Use the .3mf file to specify an infill that suites your taste. Adaptive Cubic is my favorite infill for this model. Printed at .3mm with supports using Eryone Navy Blue Matte…
I re-mixed the Lego Speed Champions Car Lift model to better accommodate the pre-2020 cars that are 6 studs wide (the newer cars are 8 studs wide and will not work unless you scale up the model.) I also redesigned the floor to reduce…
I remixed this tablet tripod mount and made the following changes: Increased the thread size on the post and nut for an easier fit. Redesigned the main post for horizontal printing without supports. Redesigned the clamp to match the…
This is my take on the Quoridor board game. Modeled in Fusion 360 and printed in PLA at 0.30 layer height. I recommend printing the board face down on a textured powder-coated sheet without any supports. For two players, print 2 pawns and…
I created this Ryobi Link compatible small bin using the Cleat created by SemaphoreSlim. I plan to create additional variations with dividers and lids. Printed at .03mm. Update: I updated the model to add the feet as well as make some…
Print Settings: .30mm, 5% infill, No Supports. Rotate 45 degrees on print bed. I added a version with a thicker back ( Freestanding_Sunglass_Rack_4mm_back.stl )
Large hook compatible with the Ryobi Link system. Printed at .30mm without supports using OVERTURE Grass Green PETG.
This an Accessory Rail for the Ryobi Link Lockable Tool Organizer Cabinet, Speed Bench, etc. The accessory doesn’t appear available in the U.S. on its own, so I modeled my own. It prints well at 0.3 layer height without any supports. I…
This model allows you to hang Ryobi ONE+ 18V tools using the Ryobi Link system. It features a base that can be rotated to accommodate different mounting options. I had trouble finding the official Ryobi version at stores locally, so I…
Organize your drill/driver bit cases using the Ryobi Link storage system. Prints at 0.30mm layer height without any supports. Printed with OVERTURE PETG Filament (Grass Green).
Organize rolls of tape! I created a base plate for the Modular Tape Storage model that is compatible with the Ryobi Link system. Printed at .30mm without supports using OVERTURE Grass Green PETG. Dowel segments and hangers available in…
I remixed LoboCNC's Gravity Broom Holder to make it compatible with the Ryobi Link system. Printed at .30mm with limited supports using OVERTURE Grass Green PETG. Updated the model on 4/19/2023 to improve the fit of the cleat.
Updated the model to allow for easier removal of the screwdrivers. Organize your screwdrivers using the Ryobi Link storage system. Prints at 0.30mm layer height without any supports.
This model allows you to hang three 18V Ryobi batteries using the Ryobi Link system. Printed at .30mm without supports. I updated the .3mf and .gcode files so that the battery sleeves are now at a 45 degree angle. Thanks @JPMakesStuff for…
Updated model for hanging mallets or hammers using the Ryobi Link system. Printed at .30mm without supports using OVERTURE Grass Green PETG.
Check out my simplified Paper Towel holder for Ryobi Link v2 Hang a paper towel roll using the Ryobi Link storage system. Print recommendations: Layer Height: 0.20mm Supports: Organic supports Infill: Rectilinear 10% Filament: OVERTURE…
The original glass globe broke and the Globe shade for floor lamp model by lehighluke was a close match. I reduced the size of the original model and added a flange to fit in the light socket. Printed in vase mode at 0.30mm layer height…
This mount allows you to hang two mallets or hammers using the Ryobi Link system. Printed at .30mm without supports using OVERTURE Grass Green PETG.
I converted a picture into an SVG file and imported that into Fusion 360 to create this model. I recommend printing the top face down on a textured sheet to get the texture shown in the photo. The model prints well with PLA at 0.30 layer…
Organize your pruning shears using the Ryobi Link storage system. Print recommendations: Layer Height: 0.30mm Supports: None Infill: 0% Perimeters: 3 Filament: OVERTURE Grass Green PETG.
Get the most out of the space on your Ryobi Link storage system with this reversible cleat. Fits in the standard orientation as well as inverted (see the pictures.) This model is meant to be used as a starting point for your Ryobi Link…
Simplified version of my Paper Towel holder for Ryobi Link . Print recommendations: Layer Height: 0.30mm Supports: None Infill: Gyroid 10% Filament: OVERTURE Grass Green PETG.
This mount allows you to hang your Expand-It attachments using the Ryobi Link system. Fits in the standard orientation as well as inverted (see the pictures.) Printed at .30mm without supports using OVERTURE Grass Green PETG. Portions of…
Hang a disposable gloves box using the Ryobi Link storage system. Printed at .30mm without supports using OVERTURE Grass Green PETG. Portions of the cleat remixed from SemaphoreSlim 's Cleat for Ryobi Link .
Updated my 40V Batteries mount for Ryobi Link model by adding a 25 degree tilt to allow for easier add/removal of the batteries. This model allows you to hang three 40V Ryobi batteries using the Ryobi Link system. Printed at .30mm without…
I needed a quick way to attach strobe lights to my Mini 3 pro drone for night flight visibility. I designed these mounts in Fusion 360. They attach quickly and securely using a single rubber band. Printed on my Prusa i3 MK3S+ in draft…
Updated my 40V Battery mount for Ryobi Link model by adding a 25 degree tilt to allow for easier add/removal of the battery. This model allows you to hang a 40V Ryobi battery using the Ryobi Link system. Printed at .30mm without supports…
Check out my updated 40V Batteries mount v2 for Ryobi Link model. This model allows you to hang three 40V Ryobi batteries using the Ryobi Link system. Printed at .30mm without supports using OVERTURE Grass Green PETG. Portions of the…
Check out my updated 40V Battery mount v2 for Ryobi Link model. This model allows you to hang a 40V Ryobi battery using the Ryobi Link system. Printed at .30mm without supports using OVERTURE Grass Green PETG.
This model allows you to hang an 18V Ryobi battery using the Ryobi Link system. Printed at .30mm without supports.
I was learning how to model custom nuts and bolts in Fusion 360 when I had the idea to create this fidget toy. The bot has a stopper at the end to keep the nut from spinning off. I printed the nut and bolt with PLA at 0.20 layer height…
This is a replacement valance clip for 2.5" blinds. I'm not sure of the brand of blinds, but if your clip looks like this one and the blinds are 2.5", it may work for you. The model prints well in draft mode (0.30mm) without any supports.…
Holder for rakes, brooms and Expand-It tools that is compatible with the Ryobi Link storage system. Printed at 0.30mm with OVERTURE PETG Filament (Grass Green) without supports. Infill values (Rectilinear): Arm 100% Cleat 50% Gripper 25%…
My original entry for the Tessellating Tiles contest. Prior to the contest, I was aware of M.C. Escher's work, but had never created a tessellation. It was fun learning.
Just another Dyson accessory wall mount for our Dyson Cinetic Big Ball upright vacuum. Printed in white PETG at 0.30mm with some organic supports.
These are all currently available results.
