Counting matching models…
I had to cut long curtain rail Ikea Vidga into two pieces, but there were ceiling mount holder only for one part, therefore I created this model so I could use the other part, too. The original holder design is slightly modified for…
Print instructions I print with PETG, 0.6 mm nozzle that significantly speeds up printing and also makes the part mechanically stronger thanks to higher layer (0.3 mm in my case). Another non-default setting is use of 3 perimeters.…
I have lost cap for my shaker. Unfortunately, it has quite unique thread that is not continuous, but separated into four parts. It has inner diameter 36 mm. I enclose also editable file for Fusion 360, if anyone will need to modify the…
Replacement for paper clock hands commonly used on paper learning clock in school. They can be also used for “do it yourself” homemade clock. Print instructions I have printed all parts from PETG, but you can use also PLA. No supports or…
Upper rod cover originally made for trampoline, but can be used for any rod and also model parameters can be adjusted based on requested rod diameter. This one is for rod with 25 mm inner diameter. Print instructions Supports needed at…
Case for TePe interdental brushes. 6 pieces (different brush sizes, e.g. set from 1 to 6), height including original single brush cover 3 pieces (different brush sizes), height only for brushes Print instructions I used PETG for printing…
Replacement (reinforced compared to original) pin for rubber strap used for cable managment on Dell notebook power adapter. Potentially can be used also for other straps, but it was not tested. Print instructions Use 0.4 nozzle, 0.2 mm…
My original rubber crank (handle part) holder for Porlex Mini broke and therefore I have often trouble to find the crank (handle part). So I designed this solid holder from easy to print material, PETG in my case, as a replacement. Print…
Stackable box with adjustable size and design. NEW: Box cover model added. Some basic possibilities of design modifications: 2 models included - with and without cutout on shorter side NEW: 1 model of box cover added - you can apply the…
Replacement for cracked Ikea RIGGA cloth hanger socket with imprinted M6 nut (wrench 10 mm). There are two versions one for low / thin design nut (DIN 439, height 3,2 mm) and second one for standard design nut (DIN 934, height 5,0 mm).…
Bowtie with classical guitar design. The size can be adjusted based on your preference. Print instructions I used PLA, 0.4 mm nozzle, 0.2 mm layer height. No ironing (I tested it, but the result was worse than without it).…
Watering hole stuffing for Savic Rody Cavia cage (70 x 45 x 31 cm), it is originally for guinea pigs, but also can be commonly used for hamsters. We have faced the problem with biting the plastic around the watering holes so I designed…
Whiteboard magnet case - in default a round magnet with diameter of ca. 10 mm and height ca. 1,95 mm. It is possible to adjust dimension according to your need (magnet size). Print instructions I used PLA, 0.4 mm nozzle, 0.15 mm layer…
These are all currently available results.
