Counting matching models…
A small spatula / palette knife for oil painting. Use PETG or even ABS to withstand the oil colour and print it upright. The tool is designed basically with a series of sweeps plus a shaper form for the tool-tip. Like always the…
I needed some washers, therefore i created a parametric model
remixed cutter model to reduce material
Double accu case for Canon LP-E6(NH)
Remixed wall mount for Navimow i-Series GPS-receiver. It carries the 25.4mm extension-rod that came with the antenna to rise it above roof-level. Update: added a strong version with modified cross beam to reduce wind induced vibrations.
For my AMS i needed an overview which kind of filament is loaded. Therefore i designed some sample filament chips as well as a small stand to show them. The chips are marked with a short text within bambu-studio, which also allows to add…
Some of our devices remain on the usm-sideboard and are charged overnight. Initially, wiring was quite a mess, so a small guide ordered the chaos :) Not sure whether this also works with sideboards that have no separate top-frame … As…
Vorwerk to 35mm-Adapter, e.g. to use Miele-Equipment on your Vorwerk-vacuum
two types of tags (slotted vs hole), to be attached to the x-mas-gifts with the gift ribbon. As their design is parametric they can easily be adapted with FreeCAD (sources are provided) by choosing or even expanding the predefined…
Ein Stern pro Tag in der Adbentszeit: Sterne mit Tageszahlen für den Adventskalender. Für den Bambulab vorformatiert 2 farbig …
The creation consists of 2 parts: the FreeCAD-file contains the basic geometry whereas the emf-File contains most of the writing. Designed for and with the bambulab-studio.
We had the problem to merge the air exhaust ducts of two mobile air conditions into one outlet window of around 210x180 mm. There were standard pipe reduction adapters that could be combined with this construction (white parts in the…
Our 70s Singer sewing machine was broke. Unfortunately the sewing foot broke apart (maybe relatied to it's age of around 50 years). A replacement has been designed that's even better than the original. The foot can be exchanged separately…
A small dry-rack to be placed on a sink to dry various brushes with 5-12 mm brush-handle-diameters. Version 2 with optimized material consumption.
A tray for the sharpening helper from https://www.printables.com/de/model/147202-whetstone-sharpening-helper. Snuggles around the rails and has a tub to catch the water for the sharpening stone as well as fixing points to clamp the tray…
These tags can either be coloured by hand or printed dual color (see attached 3mf-File for bambulab X1C) Made of PETG-CF and white PETG, the text is quite nicely readable. Also the FreeCAD-files are provided to allow remixes and…
two of these attached to the wall allow your longboard being stored away properly. Prints without supports.
5mm feet for 2020 extrusion profile, to be sscrewed on with M5 flat head screw and M5 slot nut. Prints well with TPU, gyroid infill 15%.
Another remix of the batterie-carriage ...
Remix meiner Sterne diesmal mit einem Loch zum Aufhängen oder festbinden. Im Beispiel gedruckt in PLA wood und PLA grau.
Winter cover for the lower bar of the GPS-mount bar of the i-Series Navimow, printed in PETG.
Toolbox for the 20x20-frame of the x5sa. Mounted with keystones and screws.
A small variety of taper plugs collected in a parametric model as part of my standard parts catalogue. Best printed in TPU
A small Tag to be labeled (designed for DYMO 32x57 label) that can be magentically attached to the IKEA Hemmafixare-Box. Printed in PLA or PETG. Supports are needed for the magnet-holes. For best sticker adhesion ironing is recommended !…
Mount for installing a Mobotix Cam tilted in an outdoor setting.
printing without supports works well. PETG white, 25% infill.
just a small decoration for your christmas-tree
The wedge prints well in TPU or PETG without supports.
Inlay for a T6.1 cup-/can-holder (rear), to allow small cups (otherwise they would drop through) ,,,
Created by subtracting the Outline of the TC1 form a standrad GF-block. I also added a pouch for the cable-stuff that came with the tester (although these testing cables are really poor quality)
the spring preload adjuster of my son's DR-650 didn't really fit into the frame of the motorcycle without adjustments, e.g. removing the rear footrest. Therefore we decided to create a fixture / bracket to attach the preload adjuster to…
This small buddy holds the legs (tubular) of a chair in position. Eventually some of these broke during the hard business usage and had to be replaced
The provided FreeCAD- file shows the construction using simple geometric primitives.
Magnetic Tag “Steckschlüsselsatz” to be attached to a Tool Trolley (fits well for my Wisent Trolley). Prints easily with 2 colours (white on black recommended) seprated by layer. Printed in 0,12 mm layer height, no supports needed. 2…
Magnetic Tag “Bohrer & Austreiber” to be attached to a Tool Trolley (fits well for my Wisent Trolley). Prints easily with 2 colours (white on black recommended) seprated by layer. Printed in 0,12 mm layer height, no supports needed. 2…
A small plastic spring that returns the locking lever of a tabletennis plate. Print it in 45° with supports to increase mechanical strength of the small pole that fits into the lever. A FreeCAD model is provided as usual.
The outdoor lightchain IKEA Svartra https://www.ikea.com/de/de/p/svartra-lichterkette-12-led-schwarz-fuer-draussen-30521800/ comes without a storage solution (maybe it's meant to stay outside). As we move it around from time to time and…
This design has been created to organize the magnet dispensers designed by Brian Dean in an upright position to optimize space consumption in my drawers. A modular design allows to arrange the baseplates in a linear order. FreeCad-File…
Stilisierter Storch als Rankhilfe. Ich habe das Modell für den Druck um 150% in X und Y skaliert, s. 3mf-File. Original-FreeCAD-File liegt bei.
My X1C resides on a roll-container near my desk. Unfortunately the dustpan lay around somewhere in the room. Now it's a close friend of my X1C :)
I use these tags to mark the tool cabinets in my garage and the fobs for the associated cabinet keys. They print well without support. The tags can be equipped with a 8x1mm magnet on the back. I used these:…
This design adds a simple fixture for up to three candles or tealights to the very beauty halloween latern mentioned above
A better way to organize your cables in a drawer, really helpful! can also be used to organize wires and ropes.
Modification of an old Dremel MultiPro Drill press stand to adapt an ERSA RDS80 soldering iron. Together it can be used as a heat set insert tool, e.g with ruthex adapters for ERSA Series 832/842 + the corresponding soldering tips from…
We have 2 sets of these Normann Design Stackable Tablets (3 each) which we love very much. Unfortunately some of the rubber spacers / bumps got lost during the years and Normann Design was not really willing to sell spare parts … so i…
tired of carrying your RF One S outside for the garden party or on vacation/ camping without a handle ? RF 1 the Move is the solution ! This rig provides a cage for the box as well as a solution for cable management and a comfortable…
Remixed to gain more stability
A small wall bracket for Apples Homepod mini, 2nd Gen. Will be screwed to the wall with a single screw. It also provides a simple solution to store away remaining lengths of the power cord. Designed in FreeCAD, the source is provided for…
Created by subtracting the pump's outline from a solid GF block
Small carriage to carry a distributor valve. Best printed on one side, needs support. 40% infill worked nicely for me. The carriage was designed to fitt 6mm cross bars with a distance of 45 mm. For your convenience i added the FreeCad…
The wooden cap of our bird feeder broke apart after around 2 years exposed to the weather. I designed a replacement cap with a heat insert. You also need a 6mm heat insert, an 80mm m6 rod, a washer and a nut (+ a cap nut m6). Printed on…
Created by subtracting the outline model of the multimeter of a standard GF-Block. I added a 2-slot bin for the measuring tips and cables
Inlay, created by merging a standard GF-Block with a rought cutout shape of the charger
A small bar that aligns the top frames of two acer Nitro 32" XZO curved screens standing side by side. Can easily be adapted to your setup using freecad, supposed your screens have a small frame like mine.
These are all currently available results.
