Counting matching models…
This is a Apple Earbud holder, with a little slot to hold the 3.5mm to lightning adapter. update: v4 adds a hole so that both lightning and older 3.5mm jack versions will fit Print Settings Printer Brand: Prusa Printer: i3 MK2 MMU Rafts:…
15" MacBook Pro folding stand. Print 2 of each STL in PLA. Requires M3 hardware to assemble Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 50% Category: Computer
Different knob shapes for converting a Behringer X-Touch Mini for flight sim VR use. Use https://dev-tty.nl/X-Touch-Mini-FS2020/ for direct integration to MSFS2020 update: added some more knobs Print Settings Printer Brand: Prusa Printer:…
So i had this projector and the little riser that is supposed to pop out is broken. Plus, it never really went as high as i wanted so i was always using stacks of random books or other flat things to rise it up. No more! This little handy…
More powerful micro quads need more powerful batteries! This is a scaled of version of my whoop box: https://www.thingiverse.com/thing:2515934 Flip the lid over 180 to print. Works with 450mah 1S batteries. (7x17mm cross section, for…
Nice little "coffin" for your whoop batteries. Holds 27 1S lipos. Insert vertically for full, sideways for empties. You can add some paint into the F & E letters & arrows to see them better. Squeeze the short ends of the lid to remove…
Battery box for the slightly thicker, taller 300mah batteries. Place the batteries horizontally for empty, vertically for full See https://www.thingiverse.com/thing:2515934 for the original. Print Settings Printer Brand: Prusa Printer: i3…
for all your rebellious needs! Category: Outdoor & Garden
This is a travel limiting stop for the Saitek flight simulator quadrant. Prevent accidental thrust reversing at bottom throttle! With a light pull of the tab you can bump the lever down to hit the switch. I used this spring kit:…
download edrawingsviewer.com to see the assembly easm file. additional parts required: 2x https://www.magnetshop.com/neodymium-disc-magnet-50dne1632-ni.html 2x https://www.mcmaster.com/92981A303/ 2x https://www.mcmaster.com/92981A299/ 1x…
TPU parts of my own design for the FlyFive33 Switchback frame Fixed 45deg cam mount - holds a Foxeer nano 1.8 lens or similar without screws New flipstick with hook under top plate Two-piece vtx antenna bulkhead (tbs screw-on type) mount…
edit 2/6/2020: added taller lid for longer 300mah batteries Based on my previous designs: https://www.thingiverse.com/thing:2515934 https://www.thingiverse.com/thing:2745794 https://www.thingiverse.com/thing:3277832 This is the best…
Easy drop release mechanism designed for an egg-drop school project! Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.2 Category: R/C Vehicles
Thin TPU spacer to avoid Nurking your Aikon ESC on the FlyFive33 build! Keep the magic smoke in. Place on top of the pressnuts before installing esc. Has pads to block clamp screws from contacting ESC. enjoy! Print Settings Printer Brand:…
Dual color XT60 cap. Green for full, Red for dead. Pause print at 10mm to change colors. Print the slider by itself in black. Print in TPU. I made the width a little smaller so they grab nice. The "slider" hides one of the colors so the…
Ultra-minimalist lightweight tiny whoop cam mount! Wrap around the camera and use the front FC screw to mount. Sits at about 20-30 degrees 0.5 grams! Save a whole gram from the acrobee bb lite/BBBL cam mount enjoy Print Settings Printer…
Clip-on stand for a Fluke 21 multimeter Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Category: Hand Tools
I got tired of picking up the remote the wrong way and hitting the wrong buttons. This little case covers just the bottom half of the remote, leaving room for a charge cable. I printed it without supports, it was able to bridge the gap…
This is a 2-piece clamp for making Tiny Whoop gates using sharkbite (or similar) 16mm OD tubing with LEDs inside! Print 2 identical halves and bolt together with M4x20 hardware. It is sized for a approx 16" gate (1200mm tubing/LED strip)…
Bracket for Playseat Challenge to mount Saitek throttle quadrant. Print in orientation provided. Uses M4 hardware Also included little flap/gear thingies to sick on the buttons with VHB tape. Print Settings Printer Brand: Prusa Printer:…
Insta360 Go mount for Five33 switchback. Print in TPU example footage in FlowState mode: https://youtu.be/TU-s9ToI6Ho Category: R/C Vehicles
I remade the Thanos AMD-AASD15 top plate to have the numbers right-side up, and the Thanos logo emedded for multimaterial printing. enjoy! Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 200…
stick tops for pinchers. print in TPU Category: R/C Vehicles
This is a spacer & topper for the Tiny's LEDs Unity Mini F7 flight controller. I have it sized for a Aikon 35A 20x20 esc underneath, but others may work as well. The Unity FC mounts the receiver underneath, and a TBS vtx on top. These TPU…
GoPro Session surround plate for my quadcopter Category: R/C Vehicles
Pagoda protector. Print 2 for one antenna. This model has chamfers and clearances to enable an easy snap on fit. Hold together with a zip tie. Designed for PLA Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No…
Mount for the ImmersionRC Duo FPV receiver. Designed for 1" PVC tube. Slip a ziptie thru the slot to hold it tighter. The clip can be attached horizontally or vertically. See more info at https://www.youtube.com/watch?v=ZpkoD7MT5yc…
These are all currently available results.
