Counting matching models…
Do NOT throw this at anybody! Only for display and cosplay! There are two versions: V1 with the blade separated, for a cooler look. Assembly: Insert the blue decoration pieces. Glue both parts together with the connector. Glue on the…
The head can be screwed onto the body via a twist lock mechanism. Best print at 0.15 layer-height. I only worked with support enforcers. Supports at arms (side of the body) and inside the head. It is not the cleanest model since its my…
The original model 60x60x20, for M3 Screws, by bjripp is super good go check it out! I just made the holes lager to fit M4 screws with a cylinder head.
A simple Crochet hook rack for a set of 17 hooks. Hook Size Hole size in the rack 8,0mm 7,0mm 6,0mm 5,5mm 5,0mm 4,5mm 4,0mm 12mm 3,5mm 3,0mm 2,5mm 2,0mm 10mm 1,75mm 1,5mm 1,25mm 1,0mm 0,75mm 0,5mm 8mm
Insert for the base game Mycelia (possible expansion will not fit). Can be printed in 3 or 4 parts for printers with smaller beds. INSIDE dimensions of the Box. (my Box European/German) 253 x 253 x 75 mm. (9,96 x 9,96 x 2,95 in) To be…
He sits on your desk ready to assist you. Holding up your phone (or potentially jewellery). Granted he is not that small but he fits on the bed of the MK3. If you slice the model yourself you could decrease the infill.
For sleeved MTG cards and a deck-size of 100-120 cards.
This cap allows to mount a 20x20 extrusion to 45° degree to an other extrusion profile. Stiffening your extrusion frame/construction. You need a M5 screw for the front (flat pert of the cap). And a M4 screw + a T-Nut (for the angled part…
A Lid for the board/logic game Rush Hour by ThinkFun. Clicks on the board and keeps the cars and semi-truks secured. Just make sure you put the trucks in like in the picture (in the middle) otherwise it wont fit. My box is 140 mm x 155 mm…
Try making the six pieces stick together. No glue allowed! :) You need to print: Bottle/Bullet_1 once Bottle/Bullet_2 three times Bottle/Bullet_3 two times Its a tight fit but it works :)
A dockingstation for the Switch lite using the standard switch loading cable and a 90°-USB-C adapter. You need a 90°-USB-C adapter like this. https://www.amazon.de/dp/B0BRCQM9T4?psc=1&ref=ppx_yo2ov_dt_b_product_details (not affiliated )…
For spools with a 20cm outer diameter. Printable without supports. Fits on the bed of the MK3, just rotate it. Printed mine with a layer height of 0.3, which took about 4h on the MK3.
It is what to title says. Quiet height about 38 mm, but it spins relay good. I printed it at 0.2 mm layerheight. With a gap of 0.2 mm between the two parts.
A joint for LED-light or camera microphone. The hole in the lower-part fits a ¼ inch thread (without the actual thread modeled) Additional you need a M4 screw with at least 12mm length. And a M4 Nut.
Print in place "bearing". The clearence of the bearing is 0.2mm, make sure your printer can reach that. You could build it with "infinite" discs, making it super high. If it is to easy increase the distance between the discs. Just dont…
A rugged but simple lid for the 750ml true fruits bottles. Two versions with and without seal. Print the seal in TPU or cut it out of other soft material.
Insert to store coins, wantedposters and duelmarkers.
These are all currently available results.
