Counting matching models…
I've long been a big fan of the Keycappie by Romly, a great little figure that can house a an MX compatible mechanical keyboard switch right in his head. They're so cute that I couldn't resist the temptation to make one of my own. I'm not…
Super simple model that I made by hacking together two other models from Thingiverse namely this PS5 controller stand and this Skadis hook . Aside from bodging the two together in Tinkercad I flattened the sides so that the model can…
I'm a huge fan of Star Wars and the Droids from that universe. Unfortunately, I don't have enough space for full sized models, but I do have a couple of free shelves that I have slowly been filling up with Droids and Robots from various…
The Birb is the Word! A couple of years back I discovered the “Canairi” Air Quality sensor on Kickstarter. I loved the cool design but felt that it was lacking in functionality (and using sensors that weren't really very valuable for my…
I needed a way to keep my precious Engineer SS02 Solder Sucker handy on my Ikea Skadis pegboard so I modelled up this little beauty. To print, you only need supports for the hook section so I prefer to use support enforcers rather than…
Hamster burrows by popular brands are massively over-priced (€25 for a couple of sheets of laser-cut balsa wood?) so I created this simple hamster-hide that you can 3d-print at home on even small printers like the Prusa Mini! Also…
I really loved the skadis driver holder that this thing is a remix of, but it didn't have enough holes to hold my set of 11 Lindy screwdrivers, some of the drivers didn't quite fit and I didn't like how the screwdrivers were set at a…
I really liked the “simple modern key hook" model by shanehoggatt but couldn't screw into the wall so I made this simple remix that removes the keyhole and adds a cavity in the rear for a nice tidy look when you install with double-sided…
I recently acquired an espresso machine and needed a knock box to dump out the coffee grounds into my machine. I was concerned this wouldn't last due to the forces involved, but I have been using this daily now for 8 weeks and it shows no…
Are you a Satanist? Need somewhere to put your cup of molten brimstone? Don't worry! I designed this lovely little pentagram coaster for your desk or coffee table. It's currently 10cm x 10cm x 0.5cm so will print on even the smallest of…
Those Bosch ebike batteries are big and bulky and take up a ton of space on the floor so why not make some space and move them to the wall? This simple hook is perfectly sized for the Urban Arrow battery and screws to the wall with three…
Quick and easy to print, minimal infill required - just ensure you have some supports on the rear hooks (in PrusaSlicer, supports everywhere and snug supports will get great results) and the whole thing should print just fine (just be…
Make your Prusa Mini a little more fun by adding a spinning-head rotating octopus z-axis indicator to the top! This little guy will let you know when your z-axis moves by turning his little head around and around! This is based on the…
I needed something to hold my AA batteries in my Gridfinity trays that would also fit in my Ikea Alex Drawers but couldn't quite find the model that hit the spot for me… so I made my own. Print in whatever material you like, doesn't need…
I needed something to hold my AA batteries in my Gridfinity trays that would also fit in my Ikea Alex Drawers but couldn't quite find the model that hit the spot for me… so I made my own. Print in whatever material you like, doesn't need…
I recently bought some airtags for keeping track of my stuff. One thing I really wanted to keep track of was my precious Urban Arrow cargobike. I thought about attatching it to the frame, but wanted somewhere more discrete and settled on…
I modified the clamp for much slimmer desks up to around 30mm thick. Can now be printed on the Prusa Mini!
My son recently started learning the classic song “Stairway to Heaven” by Led Zeppelin and I couldn't resist printing a “no stairway” sign similar to the one featured in Waynes World staring Mike Meyers. No Stairway - Denied! I changed…
Simple small container for those who like to hide Geocaches. This is a remix of a model from Thingiverse, just with a text modifier added for easier identification.
I recently got into the table top war-game Tonks by @ apocrypha_now . It's a lot of fun but I don't have the time to kit bash a tonk from scratch so I quickly knocked up this basic platform in TinkerCad. Use this as a foundation to build…
A smaller screw-top bottle for gridfinity (takes up a single space). Designed to fit in the height of a standard Ikea Alex drawer. As a certified ADHD head I needed a way to keep my medication and vitamins in order, the bottles are all…
I needed a simple 2u DSA spacebar for my ortholinear board and didn't have access to any at the time so I just designed and 3d printed one! This is designed with extra stems so it can be used with standard mechanical keyboard stabilizers…
Hackers was the ultimate cyberpunk cult 90's movie, filled with all the coolest tech the time had to offer, including those awesome pagers seen throughout the movie! I'm sure Cereal Killer and Zero Cool would have loved Meshtastic and…
I wanted to use the Gonk Droid as an enclosure for an electronics project, so I used TinkerCad to make some modifications (hollowed it out, added some holes, improved the legs a bit). Figured I would share the output just in case anyone…
I'm a huge fan of Arc Raiders by Embark Studios but I just couldn't get the precision I needed from a Game Pad and so I designed and build this custom keyboard so I could play smoothly with keyboard and mouse. The keyboard is compatible…
This is a simple modification of the popular strat shaped pick tray, only I've inverted it to make a lid and added some holes so you can add some small rare earth magnets (I use these 3x3mm magnets from Aliexpress) I designed this because…
I needed a stand for my Defiant model but the OG was too big so I made a smaller one! Prints in a fraction of the time. I have adjusted the angle of the original stand so that the model has a more dynamic “in flight” pose rather than just…
I wanted a nice enclosure for my QuinLED Dig Uno board and quickly put this together. Still a work in progress but it should all work! Variety of ventilation covers included (and one with no vents so you can make your own). Features:…
A very simple modification to the original case made in TinkerCad to add a slot for the Raspberry PI 3A+ camera cable. All instructions etc are as per the original model.
Files to convert the Ikea KNAGGLIG storage box into a mini 5U home server rack / minilab / homelab. You'll need two of the side rails to get started and from there its up to you! I have included templates for 1U and 2U panels if you wish…
I recently went down the rabbit hole of designing my very own split ergonomic mechanical keyboard and this was the result! The HellSplit is a 40% split ortholinear keyboard with a vertical column stagger and asymetric layout powered by…
I lost one of the aluminium feet from my DIY mechanical keyboard. Rather than order more, I simply measured the existing one, modelled it up and printed my own. There is a small gap in the top where you can add a small silicone furniture…
This is a really simple little key cap for the 12mm tactile buttons that often come in electronics kits. I intitially wanted to make square buttons but found that it's impossible to make them align due to the amount of slop in the button…
Hotend parts for the Prusa Mini with E3D Revo Micro to enable mounting a pen and using as a pen-plotter. You will need M3 heatset inserts and M3 screws to secure the pen or just use a slightly bigger screw and you should be ok. See my…
I've built a few cyberdecks over the years. Pelican case jobs mostly, the knd that look great on a desk but are a pain to actually use in the wild. Too bulky, awkward power setups, not really something you'd pull out in a coffee shop…
I like to use 2u keys for my spacebars, but none exist in KLP Lamé (unless you want to pay for the 3dkeycaps extended version)t so I quickly knocked this 2u together in TinkerCAD. I haven't yet been able to print one for myself, but…
The Raspberry Pi Touch Display 2 5" is similar in many ways to the 7" version, however the mounts on the back are quite different which means you can't use the commonly available stands nicely. Here is one that fits the Pi 5 perfectly.…
These are all currently available results.
![[GR3ML1N] A Handheld Cyberdeck](https://media.printables.com/media/prints/db82350e-8c52-4842-95c6-bc41a85fe69b/images/12739639_cb3f1688-e134-4ccf-9399-c38840b412a2_da77ddd1-f5e9-4430-a159-14930cf87236/img_9763.jpg)
