P
PrintablesJohny69
Cybex cup holder
This is a cupholder for the Cybex Priam baby stroller. Should fit all Cybex strollers though.
- Downloads
- 1,935
- Likes
- 141
- Rating
- 4.96
All models
45 models
P
PrintablesJohny69
M-LOK Picatinny rail
Created a M-LOK Picatinny rail, to mount accessories to your firearm. To attach, you need to buy the screws and nuts, either directly from Magpul or from aliexpress or where ever is easiest for you. You need 2 screws and 2 nut to attach.…
- Downloads
- 1,587
- Likes
- 181
- Rating
- 5
P
PrintablesJohny69
Oryx Chassis competition upgrade
UPDATE: 7/3/2025 I have added fusion360 and step files for the backend, if someone want to run wild with it and make modifications. If you do make changes, please upload as a remix. These files are not intended for commercial use. It…
- Downloads
- 1,300
- Likes
- 134
- Rating
- 5
P
PrintablesJohny69
Picatinny bag rider Tikka T3X TAC A1
Print in upright position, no supports needed. Holes are designed slightly undersized so before assembly, drill through holes with 4mm drill. Designed for M4x30 bolt and M4 nut. 1/8 inch imperial hardware should work as well.
- Downloads
- 900
- Likes
- 60
- Rating
- 3.67
P
PrintablesJohny69
SKODA Superb sprung cup holder
The problem: the 3 cup holder design does not accommodate smaller drinks such as a Red Bull can. Since the cup holder holes overlap, it's not really possible to hold 3 drinks, so the middle section is basically useless. The Solution: I…
- Downloads
- 743
- Likes
- 92
- Rating
- 5
P
PrintablesJohny69
Go-kart
This is a model of a racing gokart made for my friends son. Its designed in a way to be printed without supports. The model can be separated into individual pieces in the your slicer. Depending on what colors you choose, you can print the…
- Downloads
- 654
- Likes
- 24
- Rating
- 5
P
PrintablesJohny69
45 degree offset mount picatinny
Designed to have a small footprint on the main rail, so that it fits behind or in front of your scope. Specifically designed to fully support the holosun 507 pistol red dot, which has the same footprint as an RMR. After printing all the…
- Downloads
- 650
- Likes
- 49
- Rating
- 5
P
PrintablesJohny69
SPUHR DOPE card holder
Dope card holder for the SPUHR optics mount. Light, adjustable and moves out the way when not needed. Im a lefty, so the pictures are on a lef handed rifle, but I uploaded mirrored versions as well. Print in PETG or carbon infused…
- Downloads
- 622
- Likes
- 54
- Rating
- 5
P
PrintablesJohny69
Vacuum hose holder
A wall mounted holder for a large hose, in my case, for a vacuum hose. I searched around and didnt really find any mounts to accommodate such a large hose in multiple coils. The model is split into two parts for no support printing. There…
- Downloads
- 606
- Likes
- 87
- Rating
- 5
P
PrintablesJohny69
Cable clips
I used PETG as it was for my car, but PLA should be fine as well. wall thickness is 1.2mm, print upright using perimiters. You can also scale them in Z direction, to make them longer. This is 30mm. use brim for better bed adhesion, but…
- Downloads
- 566
- Likes
- 94
- Rating
- 4
P
PrintablesJohny69
Safety flag / magazine (Flagazine) for Tikka T3X Tac A1 or CTR
This is another model to expand the collection of flagazines from DeWZ.
- Downloads
- 487
- Likes
- 29
- Rating
- 5
P
PrintablesJohny69
Holosun 407/507 cover
This is a cover for the holosun red dot. There are 2 versions, one for rail mounted and one for slide mounted dots. Print with extra perimeters so the model is solid. No infill needed. NO supports needed, if your printer copes with…
- Downloads
- 460
- Likes
- 35
- Rating
- 4.33
P
PrintablesJohny69
Spotting scope iPhone adapter
update 27/2/2025 There are 2 versions (iphone 14 PRO and iphone 15) Designed for the Vortex Viper scope. I have uploaded the step and F3D files in case you want to modify the design for a different phone or different spotting scope. If…
- Downloads
- 425
- Likes
- 44
- Rating
- 5
P
PrintablesJohny69
SEND iT electronic level mount for SPUHR
Two mounts for the MDT LRA SEND iT - MV3 level. both are vertical mounts for the SPUHR mono block scope rings. The 45 degree mount is to have the SEND iT on the RIGHT side of the gun. This is the best location for lefties and/or left eye…
- Downloads
- 374
- Likes
- 17
- Rating
- 0
P
PrintablesJohny69
Lego Saturn V vertical wall mount
This model is loosely inspired by the actual launchpad, but simplified so that its easy to print. In the back of the bottom pad piece, there are 3 screw holes you can use to reinforce the layers. I printed this in PLA and should be fine,…
- Downloads
- 246
- Likes
- 44
- Rating
- 0
P
PrintablesJohny69
Bristles for "Adjustable Height CNC Dust Shoe for DeWalt 611"
These are bristles for the Adjustable Height CNC Dust Shoe for DeWalt 611 by Gage6917. It is very hard to source the bristles in Europe, so I decided to print them as well and it turned out fine. There are two versions uploaded, one…
- Downloads
- 244
- Likes
- 33
- Rating
- 5
P
PrintablesJohny69
Deeper lid for 308 ammo box
deeper lid for https://www.printables.com/model/58796-308-ammo-box
- Downloads
- 244
- Likes
- 34
- Rating
- 5
P
PrintablesJohny69
CZ 457 race/competition magazine pouch
This pouch fits in with the system here: https://www.printables.com/model/358633-double-stack-race-mag-pouch-canik-glock-mp-cz-sig created by @CadeyzDad You must download the other parts of this system from the original page above for it…
- Downloads
- 236
- Likes
- 19
- Rating
- 0
P
PrintablesJohny69
Vector Optics Frenzy cover
Yes, it does come with a rubber sleeve in the box but it is so loose, that it comes off if you just look at it wrong. So i designed a more durable better fitting one. Two files to download to choose from, one with logo, one without.…
- Downloads
- 213
- Likes
- 5
- Rating
- 5
P
PrintablesJohny69
Open RC F1 FIA Formula 2 mod with Bell HP7 helmet
I was printing a model for my father for christmas. He has a F2 team, so i tried to mod the open RC model slighly to resemble the F2 car the closest. For complete model, download the Open RC F1 files, with 2017 update. Use the chassis…
- Downloads
- 203
- Likes
- 32
- Rating
- 0
P
PrintablesJohny69
Dust collector for Bosch PBD40
I have a very small workshop, so I have to get creative with my tools. I am using the drill press as a rotary sander and needed a way to quickly attach dust collection. It works perfectly! If you want the same setup, just buy the sanding…
- Downloads
- 187
- Likes
- 32
- Rating
- 5
P
PrintablesJohny69
MGNZ induction annealer additional parts and addons
Although the original designs are great, after / during the build of my annealer, i found that some of the parts did not quite fit together right or the tolerance were too tight. I also designed some new parts that help out with the…
- Downloads
- 164
- Likes
- 14
- Rating
- 0
P
PrintablesJohny69
M-LOK addition for MagnetoSpeed Sporter mount
Huge thanks to KPTexan to create a really nice mount to the MagnetoSpeed Sporter. My bipod is all the way at the front of the handguard, so I created an add-on to to this system to use the M-LOK slot and attach the whole contraption to…
- Downloads
- 152
- Likes
- 8
- Rating
- 0
P
PrintablesJohny69
Glock 33 round magazine pouch / holster
This pouch fits in with the system here: https://www.printables.com/model/358633-double-stack-race-mag-pouch-canik-glock-mp-cz-sig created by @CadeyzDad You must download the other parts of this system from the original page above for it…
- Downloads
- 151
- Likes
- 27
- Rating
- 5
P
PrintablesJohny69
The anything mechanical counter
Mechanical counter run with 1 stepper motor. Fun way to display live statistics of your choosing. Built specifically for our business to track daily rides, but can display anything that can send you a current number through an API.…
- Downloads
- 150
- Likes
- 88
- Rating
- 0
P
PrintablesJohny69
Brass Prep Station For Reloading additional tool holder
Original model files here: https://www.printables.com/model/274346-brass-prep-st model 1: additional tool holder to accept 8-32 nuts from aliexpress. Could not source the same one that are required for this build so I modelled a new tool…
- Downloads
- 119
- Likes
- 47
- Rating
- 0
P
PrintablesJohny69
Phone mount and charger for SKODA Octavia IV
As probably all SKODA owners realise very quickly after purchasing the car, the integrated Qi charger is useless… It never works and if it somehow does, it overheats the phone. Furthermore, when you put your phone there, you cannot see…
- Downloads
- 119
- Likes
- 24
- Rating
- 0
P
PrintablesJohny69
OneWheel rear concave footpad
This is a concave foot pad for the onewheel XR. It is compatible with the flightfin fenders. I carved this out, out of plywood, but i guess you can print is as well with a large enough printer. I purposely ommited the mounting holes, as i…
- Downloads
- 110
- Likes
- 18
- Rating
- 0
P
PrintablesJohny69
M-LOK CZ 457 mag holder
Strap a spare magazine onto your rifle fore-end. On the pictures, I have a different hole pattern, but I made an M-LOK version as well. BOM: -Elastic strap 40mm wide (1.5 inches should also work) -2 M-LOK screws and nut (the screws should…
- Downloads
- 110
- Likes
- 17
- Rating
- 0
P
PrintablesJohny69
Nespresso Citiz drip tray replacement
Replacement for the plastic drip tray.
- Downloads
- 101
- Likes
- 4
- Rating
- 0
P
PrintablesJohny69
L.E. Wilson Trimmer shavings guide and catch bin
I saw a couple of these on Etsy, but no one was willing to sell just the files, so I made my own version. The advantage of my model is that you can print more “guides” to fit the exact gap for each caliber. I have created models for .223…
- Downloads
- 98
- Likes
- 11
- Rating
- 5
P
PrintablesJohny69
Smart car (ForTwo 453) iPhone XS holder
Was looking for a solution to hold my phone in my Smart Fortwo without drilling. Holder copies the curves under the navscreen and holds on high bond double sided tape. The holder is optimized for an iphone XS with case, but you can easily…
- Downloads
- 95
- Likes
- 8
- Rating
- 0
P
PrintablesJohny69
Reloading die box
Reloading die box with magnets to close. The box is designed in the style of Redding boxes and its the same size as Redding boxes. Fits 3 reloading dies and some accesories. Holes are specifically designed to fit bullet seating stems from…
- Downloads
- 90
- Likes
- 15
- Rating
- 0
P
PrintablesJohny69
cokin camera filter holder/mount
This is a camera filter holder for nikon 77mm DSLR cameras/lenses. it is modular, so that you can build it to attach 1 or two or three filters in a series. to join brackets and frame, use a M3 screw. Lenght depends on how many layers you…
- Downloads
- 74
- Likes
- 18
- Rating
- 0
P
PrintablesJohny69
SwissCard magsafe mod
Backing plate for the swisscard, to enable attaching a magsafe magnet to the back and carry the card on the back of your phone. You can buy the magnets on aliexpress for a couple of dollars. There is also a space in the middle for a…
- Downloads
- 55
- Likes
- 12
- Rating
- 3
P
PrintablesJohny69
Evolve Board Mount
Evolve Carbon GT custom board rack/mount with optional wooden stand. Mount can also be screwed directly into a wall. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Infill: 30% Notes: print 4 perimeters for all…
- Downloads
- 50
- Likes
- 8
- Rating
- 5
P
PrintablesJohny69
evolve charger mount
printed with 3 perimeters. Had problems with printing the original (by bgudell), maybe there was an error in slicing. Therefore i designed a new version inspired by this one. It should be a snugger fit to the charger, and use less…
- Downloads
- 49
- Likes
- 6
- Rating
- 0
P
PrintablesJohny69
Nicorette gum holder
Gum holder for nicorette gum. Resize for other gum sizes Print Settings Infill: 100 How I Designed This Fusion 360 Category: Accessories
- Downloads
- 49
- Likes
- 9
- Rating
- 5
P
PrintablesJohny69
OneWheel XR handle
This is a collapsible handle, which doesn't stand out when not in use. Inspired by the STEALTH handle. In order to complete your print, you need 2 of each of the end pieces which can be printed in PLA and one strap printed in a flexible…
- Downloads
- 44
- Likes
- 11
- Rating
- 0
P
PrintablesJohny69
iphone 6 clip stand horizontal
We use an older iphone 6s as a baby monitor, so I quickly modeled a stand. Its a snug fit so it doesnt slide out and stands perfectly. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill:…
- Downloads
- 41
- Likes
- 7
- Rating
- 0
P
PrintablesJohny69
TriPod Backpack mount / holder / clip
Very simple clip to attach your tripod to your backpack at the desired height. Designed so you can print it on its side for maximum material strength. No supports needed, maybe a brim is your bed adhesion is not great. Attach to the…
- Downloads
- 35
- Likes
- 4
- Rating
- 0
P
PrintablesJohny69
Position7 22LR magazine tools and accessories
This listing contains 3 files: Magazine tester Assembly tool 10 round limiter video on how assemble the magazine can be found here:
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
PrintablesJohny69
Elevator sensor blocker
Place over elevator IR sensor to temporarily hold elevator door open.
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesJohny69
Evolve Carbon GT handle
Handle for Evolve Carbon GT electric skateboard Category: Hobby
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesJohny69
Peugeot Saveur Daman 21 Burr Shaft connector
This part connects the top of the acrylic body to the inside burr shaft. It shattered on mine so i took it apart, and reverse engineered it. I printed mine basically solid in PETG. Seems like it should hold up, but you are free to…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
These are all currently available results.