Counting matching models…
A rotary dispenser to dispense a consistent amount of detergent. About 17g, as recommended for the detergent I use. It works best when mounted to the wall, inside a kitchen cabinet for example. Print instructions It prints without…
Little nozzle tags that clip on the 9mm Z-axis rod of a Prusa i3 so you won't forget what nozzle is currently mounted. Small markings on the bottom follow E3D's "awesome" nozzle coding system. As a helpful reminder. Fusion360 files…
3D printed table lamp. Print instructions 100 gram Clear PETG slices in vase mode, with 0.6 nozzle this takes ~4 hours*. Yes, I know the hole does not slice in prusaslicer. Please use subtractive manufacturing for the bottom 40mm hole for…
The Framework laptop comes with Expansion Cards. You'll probably find you need to carry some with you. I designed this box to carry four of them. The box holds them with a clip inside the USB hole. The features print-in-place lids kept…
This lampshade friction fits the E27 Hue Ambiance lights. Put the light through the shade and screw it in the socket. Print as vase mode without bottom layers. I used 0.6 mm nozzle f3d file included so you can modify the lampshade or…
Box to dimensions of Dahua PFA136 to fit for example Dahua IPC-HDBW2441E-S. This box has no cable entry points, they are easily drilled afterards if required. Or added yourself, step file included. I used the little notch in the camera…
Simple inlay to keep using the original TinySA Ultra box to store it in. Update 2024-09-10: added 5mm offset top insert, so you can keep your sma adapter attached.
This small spray foam fire extinguisher doesn't come with a wall mount. So I made one. Complementary extinguisher: AngelEye from FireAngel. Please use this to make your home safe. Print instructions I'd recommend to print the bottom…
13mm socket insert to attach your favorite Wera KK screwdriver insert to your favorite torque driver. Included also a longer version for the long socket. Print instructions Obviously this is not VDE 1000V anymore. Print 0.2mm 100% infill,…
Simple fan bracket for your LSI cards in an Jonsbo n5 Mounts horizontally or vertically with standard self tapping fan screws
Belt clip for Hitachi cordless drill. Suitable for both sides. Print instructions Print with support and raft (~2 layers). Use PETG and ake sure to print with the sides facing down for maximum stength. Increase perimeters until infill is…
Simple feedthrough that optionally fits a M6 pneufit for ptfe tube. Does not require additional fasteners, clip-on.
Mount multiple 2.5" drives on the sides of a Jonsbo N5. Screws in the side bars using standard fan screws, and the disks mount with standard disk screws. Optimized for printing without supports. Recommend PETG or better (disks may get…
My SONOS Beam blocked the view of the TV… The feet are not high enough. A small raise of about ~17mm (15mm for the print and a 2mm for felt anti-scratch feet) When not r/TVTooHigh this should be plenty. Felt anti-scratch feet are…
Replacement rubber feet for sonos sub gen 2 Print from TPU, recommend solid infill (the unit is heavy)
Bracket to put a STC-1000 or other 70x30mm temperature controller in place of the simple hygrometer in the original prusa ensclosure The opening is 29.5 by 70.5mm with 3mm room for bezels. Print standard, you can add more perimeters for…
3MF file provided has correct print settings for Ninjaflex TPU on the MK3S. 3 perimeters 0 top layers 0% infill If it doesn't work, replacement lid: 00611575
Simple weighted box with cement* that screws in one or two 300mm M8/M8 gooseneck* with a clothespin* on the end. Assembly: Print the box and lid Fill box with cement (or other heavy stuff) Close lid with countersunk M3x5 screw* Thread in…
3 part enclosure for raspberry pi 3 or 4 (only the center bit is different) with different tops Requires some countersunk torx M2.5 fasteners (WS 9475). M2.5x16 for the top, and for the bottom at least M2.5x12 up to M2.5x16. Includes…
Use PETG, observe print orientation, perimeters must carry the load. Print with more perimeters, eg: 5. Do not use long term. Careful with the LCD cables.
Print in PETG, 100% infill recommended to avoid drooping when hot. Mount the fan using two M3x12 hex socket or M3x15 countersunk > ⚠ WARNING: Careful with clipping on the PCB, there are small SMD parts on the bottom card edge. I modeled…
Simple hexagon inlay resting on the round notches preventing cooler contents from touching the coldpacks. Fits on a Prusa Mk4 bed, hence why it doesn't cover full width. I printed standard PLA speed profile. This may change after field…
These are all currently available results.
