P
PrintablesDSt
Fox pendant
Fox pendant for a necklace. high 2.5 cm, width 2 cm tested with PLA Wood Filament, infill 15 %, no support, brim, layer high 0,1 mm
- Downloads
- 3,255
- Likes
- 1,164
- Rating
- 4.86
All models
46 models
P
PrintablesDSt
Angle template
The angle template makes it easy to transfer any shape! The ledges can be added to as required. Variable adjustable into each other, the measuring unit is in cm. 5 ledges can be screwed together for storage. Print settings: Infill: 75% .…
- Downloads
- 2,841
- Likes
- 1,933
- Rating
- 4.59
P
PrintablesDSt
Aerator key M24
Aerator key M24 The aerator key is a practical tool for quickly cleaning the water strainer! It is suitable for aerators with an M24 thread! Print settings: Infill: 25% Support: No Layer height: 0,2mm Material: PETG,PLA
- Downloads
- 1,412
- Likes
- 856
- Rating
- 5
P
PrintablesDSt
Filter cleaner for inflatable hot tubs
This filter cleaner cleans the filters of inflatable hot tubs inside and out! Fits standard garden hose click-on systems (compatible with Gardena and similar brands). Dimensions: Diameter 4 cm Needs a 1/2" O-ring Print settings: Walls…
- Downloads
- 1,350
- Likes
- 600
- Rating
- 4.63
P
PrintablesDSt
Shelf Support
Shelf support Pin diameter 5 mm Size: 14 x 10 x 7 mm Print settings: Infill: 90% . Support: No Layer height: 0,2mm Material: PETG / PLA
- Downloads
- 1,148
- Likes
- 964
- Rating
- 4.75
P
PrintablesDSt
Knife and Fork Sidewinder
Knife and fork sidewinder for camping and outdoor trips. You can also just use it as a fidget toy! Simply flip it out with a quick upward move of your hand, or slide the left side up! The blade and fork are easy to replace because…
- Downloads
- 1,110
- Likes
- 434
- Rating
- 4.8
P
PrintablesDSt
Numbers Same hight, same value!
Numbers Same hight, same value! Stacking the numbers on top of each other always results in the same value of the numbers if they are the same height! Print settings: Filling: 15 Support: No Layer height: 0,2mm Material: PETG,PLA
- Downloads
- 908
- Likes
- 689
- Rating
- 4.95
P
PrintablesDSt
PCB holder
This is a PCB or wire holder for your soldering work. The middle part can be pushed down! Now a PCB or a wire can be clamped in! As an example, it holds an ESP 32 board. For bigger things or 2 wires use 2 holders. tested with Petg, infill…
- Downloads
- 890
- Likes
- 182
- Rating
- 5
P
PrintablesDSt
Quick release connector
This is a quick release connector! To open it, push the middle ring upwards! To close it, insert the lower connector into the upper one and slide the middle ring down! Quick and strong hold! Print settings: Infill: 75% . Support: No Layer…
- Downloads
- 803
- Likes
- 418
- Rating
- 5
P
PrintablesDSt
Bottle holder for the fridge
Bottle holder for the freezer! Stack the bottles on top of each other in the fridge! With this bottle holder they won't roll away and you can stack more! For bottles from 0,33 to 1 liters! Several bottle holders can be connected with the…
- Downloads
- 708
- Likes
- 258
- Rating
- 5
P
PrintablesDSt
Mini Easel
Mini easel with grain 2 sizes (14x10 cm) and (11x7 cm) good stand print in place printed with support on base plate
- Downloads
- 703
- Likes
- 140
- Rating
- 5
P
PrintablesDSt
Tent Peg for cordless Screwdriver
Tent Peg for cordless Screwdriver with a moveable Rope holder (print in place) Lenght: 18 cm Matching für 10 Bit Socket Support on build plate only Tested with PETG
- Downloads
- 593
- Likes
- 176
- Rating
- 5
P
PrintablesDSt
TPU Clip for 2-4 mm cables and PTFE tubing
This flexible clip made of TPU is suitable for cables and tubes in the size of 2 - 4 mm! Also for the PTFE tube on the 3D printer! Different sizes with 2 - 6 holes. Print settings: Material: TPU Filling: 15 Support: No Layer height: 0,2mm
- Downloads
- 550
- Likes
- 315
- Rating
- 4.86
P
PrintablesDSt
Starfish Single Extruder - Dual Color
A starfish consisting of two separate parts which, when put together, create a two-color model! 2 different sizes: Normal: 12x12 cm Small: 8x8 cm Print settings: Infill: 15% . Support: No Layer height: 0,2mm Material: PETG / PLA
- Downloads
- 533
- Likes
- 127
- Rating
- 5
P
PrintablesDSt
Easel for small photos
Easel for small photos This easel has a wood grain for a better look! It stands stable and printed in Print and Place Size 11x7 cm teseted with PLA, Support on base plate, Infill 15%, Layer high 0,2 mm
- Downloads
- 506
- Likes
- 161
- Rating
- 5
P
PrintablesDSt
Hand rotating marble run
Hand rotating marble run Place one or more marbles in the marble track. Then lift the housing up and down and the marbles move around the track! For marbles up to 14 mm Consists of the inner and outer track and a 3d printed 14 mm marble!…
- Downloads
- 491
- Likes
- 208
- Rating
- 4.83
P
PrintablesDSt
Bookmark arrow
This bookmark with integrated arrow allows you to mark text passages directly! It's quick to print and a great help for pupils, students or teachers who want to access text passages quickly! Size: 29 x 14 x 1 mm Print settings: Filling:…
- Downloads
- 456
- Likes
- 234
- Rating
- 5
P
PrintablesDSt
One Line Art animals stencil set
One Line Art animals stencil set Stencil 1 with dog, cat dolphin and bird Stencil 2 with dog with cat, turtle and bird Print settings: Infill: 15% Material: PLA, PETG
- Downloads
- 387
- Likes
- 153
- Rating
- 5
P
PrintablesDSt
Bear Beads
Bear Beads drawstring decorations for your hoodie! The hole diameter is 6mm Print settings: Filling: 15 Support: No Layer height: 0,2mm Material: PETG,PLA
- Downloads
- 373
- Likes
- 166
- Rating
- 5
P
PrintablesDSt
Bread lame
Bread lame With the Bread lame you can easily score the dough for baguettes, bread rolls and breads so that the bread can rise well during baking! The razor blade is easily clamped into the holder! The cover protects the blade! Print…
- Downloads
- 332
- Likes
- 35
- Rating
- 5
P
PrintablesDSt
Workbench stop for 20 mm hole
This set consists of bench dogs and one straight and one right-angled stop. The bench dogs are suitable for worktops with 20 mm holes. The stops are suitable for worktops where the holes are 96 mm apart (center hole to center hole).…
- Downloads
- 324
- Likes
- 167
- Rating
- 0
P
PrintablesDSt
Türanhänger STOP NICHT STÖREN, Door Hanger STOP KEEP OUT
Türanhänger mit ausgestanzten Text “STOP NICHT STÖREN !!!” Door hanger with punched text “STOP KEEP OUT !!!” Hight 16 cm Width 7 cm
- Downloads
- 245
- Likes
- 32
- Rating
- 5
P
PrintablesDSt
Sleepy deer with trees
This model shows a sleepy deer lying cozy in front of a forest! The deer with 3 fir trees is one model! The other 5 fir trees are separate models in different sizes! Print settings: Infill: 15 Support: Deer: Tree support (will be printed…
- Downloads
- 234
- Likes
- 67
- Rating
- 0
P
PrintablesDSt
Hook for Towel Radiator
Hooks for towel radiators and a plate attachment tested with PETG, infill 25%
- Downloads
- 210
- Likes
- 57
- Rating
- 3.67
P
PrintablesDSt
Knife stand
I made this stand for my most used kitchen knife! tested with PETG, infill 15%, no support
- Downloads
- 189
- Likes
- 24
- Rating
- 5
P
PrintablesDSt
Picture stand
Picture stand for small photos easy to Print! tested with PLA, infill 15%, no support size 2,5 x 1,5 cm
- Downloads
- 180
- Likes
- 104
- Rating
- 5
P
PrintablesDSt
Spoon for salt or other spices
Small spoon for salt or other spices in small containers. length 5,7 mm width 1,6 mm
- Downloads
- 174
- Likes
- 36
- Rating
- 5
P
PrintablesDSt
Halloween Smiley Deko and Pendant Single Extruder - Dual Color
Halloween Smiley 3 smileys consisting of two separate parts which, when put together, create a two-colored model! For Halloween decorations or as a pendant! Size: 2.8 x 1 cm Print settings: Infill: 15% . Support: No Layer height: 0,2mm…
- Downloads
- 173
- Likes
- 62
- Rating
- 5
P
PrintablesDSt
Gingerbread Man
Gingerbread Man with joints on head, arms and legs! 2 sizes, if you like with an extra clip-on holder, to hold a rope Please watch the animated gif video! Size: Gingerbread Man: height 10 cm, width 8 cm Gingerbread Man Mini: height 5 cm,…
- Downloads
- 162
- Likes
- 48
- Rating
- 5
P
PrintablesDSt
Sleepy deer edge
This sleepy deer is lying down with its legs hanging over the side of an edge! Maybe put him on a shelf, a table, your monitor or on your 3D printer (fix it)! Print settings: Filling: 15 Support: Tree Support (printed upright) Layer…
- Downloads
- 149
- Likes
- 46
- Rating
- 0
P
PrintablesDSt
TPU Cable ties
Detachable TPU cable ties - in various lengths The TPU cable ties are easy to remove! Print settings: Material: TPU Filling: 15 Support: No Layer height: 0,2mm
- Downloads
- 122
- Likes
- 63
- Rating
- 0
P
PrintablesDSt
TPU Wine glasses holder for the dishwasher
TPU wine glass holder This glass holder ensures that your stemmed glasses are held securely during the washing process. The holder secures stemmed glasses to the dishwasher basket and prevents them from tipping over or knocking against…
- Downloads
- 110
- Likes
- 97
- Rating
- 0
P
PrintablesDSt
Plant strips
Plant strips Stem holder with flexible strips Length: 21 cm Width : 1,4 cm
- Downloads
- 106
- Likes
- 54
- Rating
- 4.5
P
PrintablesDSt
Bobble beanie for bottles
This bobble beanie is specially designed to be placed at an angle on the neck of a bottle, where it serves as protection against unwanted intruders. At the same time, it provides a fun eye-catcher that makes every bottle look unique.…
- Downloads
- 86
- Likes
- 10
- Rating
- 5
P
PrintablesDSt
Gingerbread Man Fingertoy
Gingerbread Man Fingertoy with joints Layer high 0,2mm, you can pause at layer height 32 and change the color! Infill 15%
- Downloads
- 84
- Likes
- 20
- Rating
- 0
P
PrintablesDSt
Half-round piggy bank with 2 chambers and a cheat option
Half-round piggy bank with 2 chambers and a cheat option. For children or adults. Shows who has more savings. Special lock to separate the chambers, or to cheat! Possibility to make the money box more friendly for women or more friendly…
- Downloads
- 71
- Likes
- 49
- Rating
- 0
P
PrintablesDSt
Zen garden table with symbols and accessories
Small Zen garden table with freely placeable symbols and accessories Place the symbols ,fill the table with sand and place the accessories A small table with wood structure. 3 symbols, 3 accessories, tools and a housing for a tea light…
- Downloads
- 70
- Likes
- 36
- Rating
- 0
P
PrintablesDSt
Needle in yarn spool
Now you always have a needle with your yarn spool! Slide the container into a spool of thread and keep a needle in it. Compatible with spools with an inner diameter of 9 or 10 mm Print settings: Infill: 15% Supports: No Material: PLA, PETG
- Downloads
- 70
- Likes
- 65
- Rating
- 0
P
PrintablesDSt
Printable Monkey's Fist Keychain v1
Printable Monkey's Fist Keychain
- Downloads
- 67
- Likes
- 32
- Rating
- 0
P
PrintablesDSt
Pendants
Pendants 3 pendants in different versions The elements of these pendants are flexible tested with PETG, infill 30 % Lower layer height for better results.
- Downloads
- 64
- Likes
- 28
- Rating
- 0
P
PrintablesDSt
Take the inner cylinder Riddle
Take the inner cylinder Riddle The task is simple! Take the inner cylinder from the outer one! You may take the object in your hand, but you are not allowed to turn or shake it! This is a small, not so difficult puzzle for children and…
- Downloads
- 58
- Likes
- 18
- Rating
- 5
P
PrintablesDSt
Pumpkin Decoration Set
Set of 2 autumnal decorative pumpkins in a honeycomb design! Sizes: Size: 10 x 10 x 9 cm Size: 7.5 x 7.6 x 11.9 cm Print settings: Filling: 15 % Support: No Layer height: 0.2 mm
- Downloads
- 32
- Likes
- 12
- Rating
- 0
P
PrintablesDSt
Bobbin thread holder
Bobbin thread holder For storing sewing thread and bobbin The matching bobbin thread is always directly on the thread spool and can be stored together! Print settings: Infill: 90% . Support: No Layer height: 0,2mm Material: PETG / PLA
- Downloads
- 30
- Likes
- 4
- Rating
- 0
P
PrintablesDSt
Loading New Year
The New Year is loaded! a countdown board for New Year tested with PLA, layer high 0,2mm, infill 15%, no support You can change the color manually from layer height 32
- Downloads
- 15
- Likes
- 6
- Rating
- 0
These are all currently available results.