Counting matching models…
This is a parametric ramp for a robot vacuum. I reconstructed the design based on Richard Butler-Malone’s design using Fusion’s parametric model. For an 800 mm threshold and 50mm depth (10.2°, 18% incline) version, you need the following…
Note: Since honeycomb wall doesn't provide enough support to hold heavy stuff like quest controller, I strongly recommend using multiboard and Honeycomb to Multiboard Weight Bearing Snap. Multiboard resorces:…
Cable clip for 36 mm diameter poles.
Parametric Cable Holders for Various Diameter of Poles You can adjust: Pole Diameter Holder Thickness Holder Height Width and Depth of the Cable Holding Section The Chord Length (Entrance Size) and Tightness (Tolerance between the Pole…
Ball head's diameter is 17.4mm. Attach to the device using double-sided tape. Dimension of the mount: 113*52mm Ball-head arm that I used: https://aliexpress.com/item/1005006126807964.html Update 10.25: Noticed that an incorrect file was…
The tolerance between the letters and body is 0.075mm, which worked well for my P1S and mk3. If you are using other printer, you might need to scale down the letters.
The holder has two types of holder sections: one section for four eye drops measuring 50.2 x 3.9mm and one with a single holder at 13.0 x 3.9mm. They worked well with my eye drops. If they don’t fit, just tweak the Fusion (parametric)…
3 Options. A: No eye outline B: With eye outline C: Simplified eye Printing with 0.2mm nozzle is recommended. It takes a lot of time with .2mm nozzle. Scaling down z height is also recommended.
These are all currently available results.
