Counting matching models…
Most of the ones I've found do fit my Harbor Freight calipers, but Neiko have thicker jaws and I couldn't find a set to fit (either of my 2 pairs of) Neiko calipers so I made these. Designed in Vanilla Autocad 2027. Printed PETG 100%…
Printed in PLA without supports, 15% gyroid infill, inner and outer brim. Print face down. Designed in AutoCad.
While windsock fiberglass poles (up to 33' high) are good for very light wire vertical antennas, they are not great for EFHW, dipoles, inverted-V's, or anything with weight. For any of these other antenna options, I wanted a pole that was…
Updated part geometry for better fit with 1/2" Sch 40 PVC (28-Jan-2026) I give Uda first billing since he never gets the credit he deserved because his name isn't as cool sounding as Yagi. This project is for parts to make a 2M beam…
Version 2.0 Update: totally redesigned threads created in AutoCAD and test fitted to several commercial painter poles. The geometry was tweaked to match the antenna base better. I've included an STL of just the threads if you need them…
This project discusses an approach to Implementing the Radio Merit Badge (RMB) Fox Hunt element and the 3D printed parts that made it possible. The K4TBS ARC printed parts for and prepared 16 "Fox Hounds" to use the NZ1J DDF and Uniden…
I credit desertblade and candrist for the original inspiration for this cse, but I didn't use their models for my design. I reworked this entire design from original geometry using AutoCAD based on my particular MMDVM hat board (which…
These are sized for standard 15A - 45A Anderson Powerpole connectors. Two sizes - quad or dual connectors Two faceplate fastener options - M3 cap/button head or M3 flat head An (optional) marking/cutting/drilling template is included for…
I printed in Elegoo PETG, dual-color on Creality Hi. PLA will work also. 25% infill. You need to print at least 2 of them (or 4 if rewinding to/from 2 Elegoo spools.
I have 2 Hi's. I should be thankful that I learned on an Ender 3 Pro so I'm used to troubleshooting and fixing stuff myself. Being a multiple-times Creality owner signals that I have come to an inner peace with the struggles, failures,…
Version 2.0 Update: totally redesigned threads created in AutoCAD and test fitted to several commercial painter poles. This version also includes guy-line tie down attachment points. I've included an STL of just the threads if you need…
IMPORTANT WARNING!! - pressure holding ability is subject to construction methods, rated materials, and condition of materials. BUILD AND USE AT YOUR OWN RISK! Unsuitable materials or inadequate construction techniques may result in a…
Wether you build antennas or just tune them for use, an antenna analyzer is a useful tool. Over the years, I've owned several, including units by MFJ and Comet. I've also tried Nano-VNA, which are fine but have a steep learning curve.…
-.-. .-- A simple enclosure for a (based on the) K3NG open-source project, commonly sold as a "Morse Code CW Practice Transmit Keyboard with OLED Display USB Electronic Keyer for HAM Radio." These can be found on Ali-Express, eBay, and…
Holds pair of 15A - 45A Powerpole connectors and allows you to add after assembly is made so you can replace a boot if damaged. Be aware that you can't use these in stacked (more than 1 pair connector bodies) as these block the adjacent…
BSA logo Troop Woggle with unit number (editable). Designed to print face up with minimal support required on underside of the elevated face only. The unit number is editable modifier in OrcaSlicer. Printed 10% PLA, mulicolor. Designed…
Simple tie down. Printed on 45deg angle on side for strength using PETG-CF and wow are they strong. I made several of these and epoxied them to the sides of long painters poles for field wire antenna deployments. Sized for 1/4" SAE or M6…
Jamboree on the Air/Internet Woggle. Designed to print face up with minimal support required on underside of the elevated face only. The call sign is editable modifier in OrcaSlicer. Printed 10% PLA, mulicolor. Designed for one filament…
Bub Scout Pack Woggle with unit number (editable). Designed to print face up with minimal support required on underside of the elevated face only. The unit number is editable modifier in OrcaSlicer. Printed 10% PLA, mulicolor. Designed…
I really like these little memory keyers. They are super handy. They can save 8 memories (4 accessible in each of 2 banks) and have full controls. If you're into CW, go check them out. I have 3 of them. The latest one had an issue with…
Eagle Scout Woggle. Designed to print face up with minimal support required on underside of the elevated face only. Designed for 4-color printing. All parts assembled in 3mf file. Printed 10% PLA, mulicolor. Designed vanilla AuotCAD 2027.…
These are all currently available results.
