29 models
Edit 11/10/23: Add 9rd extension. Edit 11/9/23: Add v1.01 Vanguard variants to the files to accommodate Vanguard pushers. Also tweaked the follower for more spring clearance and lift. Edit 11/3/23: Add v1.01 files to introduce drum spring…
Print at 100% infill. You will want to install the stock bed carriage without the wheels on to these blocks. Keep all the bolts loose and then tighten them incrementally while sliding the bed fore and aft to ensure proper alignment and…
I absolutely fell in love with the Gecko by Ehdrien the minute I first saw it. I immediately built one and as one does I found things that I wanted to change. I'm not one for modifying stl files as the results can be meh at best…
After trying some of the bamboo dart molds available and finding them lacking, I decided to make my own. Yeah I know Worker makes nice metal molds but shipping and cost just didn't work for me. I tested multiple mold shapes until my…
2.2 RC Monster Truck Beadlock. 3 different offsets to fit a wide variety of models that use a standard 12mm hex. The truck pictured is an HPI Wheely King. These are specifically designed to fit JConcepts 2.2 tires, ie the Renegade Jr,…
You will need various lengths of m3 hardware to complete the chassis build. For the links you will need 24 m4x25 set screws and 24 of these rod ends. https://www.ebay.com/itm/362134661131 This chassis is designed to use the RC4WD SCS…
This is a set of 2.2 dish wheels that I designed for use on the Tamiya Hornet, Grasshopper, and Frog. I print them at 100% infill and 0.1 layers. Category: 3D Printing
This is a one piece magazine Talon magazine adapter for the X-Shot Longshot. It is intended to be a permanent install. The magazine retention is achieved with a pair of 6x7mm ball detents. This is loosely modeled after the piece that is…
2.2 Buggy Wheels. 12mm Hex. Front wheel is 28mm wide. Rear Wheel is 41mm wide. 2.2 2wd buggy tire from JConcepts and Proline fit. Category: 3D Printing
Should fit all Clodbuster 2.6" tires. Needs 96 m3x10 and an additional 24 m4x12 screws for the multi piece wheels. Stp files included for remix. Based on Drommond design from his Clodbuster and Axial chassis on Thingiverse. I just…
Edit 7/22/24 Added a revised 15rd body as well as a new 10rd body that can be printed on smaller printers like the Ender 3 and MK3/4. A quick project I wanted to knock out for the community. This is a Talon-style magazine designed to hold…
Rear steering lock out plate for the Clodbuster. You can run it as shown or flip the knuckles side to side and run it lower. I like the way shown because it has better ground clearance. Printed at 100% infill at 215C. Print instructions…
By request. A one piece slide for the Foxbat that has been lengthened a bit to be flush with the duck tail. I also spaced out the front and rear sights for a longer sight picture. The slide is 302mm long so you will need to have a printer…
1/24 RC Monster Truck Wheel. Included versions for 5mm hex (WPL) and 7mm (Axial, HBX, others). Designed to fit Spinmasters tires. I print them at 0.1mm layer height with 20% infill. PLA @ 215C. Category: 3D Printing
Made a chassis for the Wheely/Crawler King from HPI. Designed to use the longer wheelbase links from the Crawler King along with Traxxas Stampede sized bodies. You will need servo on axle steering as this doesn't accommodate the factory…
Here's a set of 2.2 wheels for the Tamiya Grasshopper 2/II. You have to use the old 5 pin style drive hub found in the kit or print a set of them from here: https://www.thingiverse.com/thing:4159329 These are the same as my wheels for the…
I removed the side grip panels and smoothed and rounded the body and bottom of the grip to use on my Alchemist Nerf build
Axle stand for the Losi LMT. You need 4 of the uprights, 2 bases, and 8x m3x16 screws. Print instructions Category: 3D Printing Summary Axle stand for the Losi LMT. You need 4 of the uprights, 2 bases, and 8x m3x16 screws.
I modded the original Cynthia to utilize heatset inserts as well as a few tweaks here and there.
A set of wheels for the Tamiya Blackfoot. Similar appearance to stock. Category: 3D Printing
This is my remix of the Orion Blasters Lynx modded to fire N1 darts using my magazine design linked here https://www.printables.com/model/945546-nitrogen-series-15rd-magazine You will need the cut version. Here is a link to Vile Mods dart…
I took Epicxxxx's bearing centering and rifling mod for standard 16mm barrels and doubled up the amount of bearings then created a suppressor appearance cover to fit around it. I included 3 variations of crush with 8 degree spin. From…
I have printed and run several of the upper link mounts that are floating around and have broken every single one. They rely too much on layer adhesion for strength. So I designed this one to literally hook the gear box and use a single…
I printed the chassis and wheels that Matt designed for use with Clodbuster axles and tires found here. https://www.thingiverse.com/thing:3347976 While I am completely stoked with the overall build I felt that the center of the wheel was…
This a complete chassis for Drommon's King Axles. It is centered around the use of a Wheely King transmission and shock towers (what I had on hand, fairly easy to find). Printed in PLA at 100% infill and 0.2 layers. Uses RC4wd M3/M4 rod…
Set of stands for the Tamiya Blackfoot. Print 4 uprights and 2 basses. You'll need 8x m3x16mm screws. Print instructions Category: 3D Printing Summary Set of stands for the Tamiya Blackfoot. Print 4 uprights and 2 basses. You'll need 8x…
A bamboo mold for the Nerf N series dart cut down with Vile Mods jig. https://www.printables.com/model/922026-nerf-n1-dart-cutter Before I molded them the cut darts were averaging 313fps over 4 shots. After they averaged 385fps with a…
I took it unreasonably personal when I found that Hasbro designed the Torrent and Sender to be compatible with hobby angled talon magazines but then turned around and made their own angled magazines not similarly compatible with the…
I am currently embracing the N1 dart as an early adopter to see how far the new darts can be taken. Drawing inspiration from Dustin who I credited for the remix I made my own 5 line PCAR using 8 degrees of twist. I went with a lower twist…
These are all currently available results.
