Counting matching models…
Hubelino ist eine großartige Duplo-kompartible Murmelbahn. Dieses Ding ist ein Lift für Hubelino-Murmeln. Der Antrieb erfolgt mechanisch und universell über einen Ixolino-Akkuschrauber, wie er eigentlich in keinem Kinderhaushalt fehlen…
I do use an enforced support for the center part of the shell only. (see pictures)
Ladestecker passt exakt in den Halter, sodass der Akku beim einsetzen kontaktiert wird. | Charging plug fits exactly into the bracket so that the battery is contacted when inserted. In addition I used THIS model to fix the charter to the…
When we placed a diaper-changing table - a self made one - on out bathtub, it blocked the access to the shower head holder. So I measured the shower head and designed a holder I could screw with wood screws to the side of the…
The glasses are well over 10 years old and I hat one of the hinges replaced before. When I contacted an optician to get another hinge-spare he made some phonically and told be, that the original spare would not be available any more. So I…
Spare part for the Playtive Station. Category: Construction Toys
Self-designed, printed and tested. Corrected, and now it fits! PLA-Part is good-enough for the job. Additional components: 2x DIN EN ISO 4762 M2,5 x 5mm 1x tripod screw 1/4''for interchangeable plate (photo screw with folding bracket) ---…
Used the head of this THING: https://www.thingiverse.com/thing:762295/files (native Inventor file included) to make a new, 2-color-head for the "Lego_man. Holder toilet paper" that does include eyes and mouth…
A cradle customised for a iPhone 15 including protective cover, that fits a standard car "Brodit"-Mounting Platform.
better cutout to see the battery status indicator. (bigger than on the image, did not print out the latest version yet)
fits well into the original containers, see pictures. the big red one is an original sortimo container. By doing this you can double the capacity of a sortimo tray - at least for small items that's helpful.
Der Wasserhahn meiner Regentonne scheint mir etwas unterdimensioniert und ich habe schon eine Weile Angst ihn abzubrechen. Daher habe ich ihn nur verstärkt. Damit ist ein Bruch hoffentlich abgewendet - und der Hahn liegt nun besser in der…
Support not necessary - the nose inside the socket gets better when supporting it with a spray on support and support enforcer. (-> see screenshot)
I do have a Brodit "ProClip" in my Car and updated the Phone Adapter I do put on it. Fits iPhone 13 mini incl. cover.
Meant as a gift, I places the logo of a German soccer club on the chest. For all Borussia Mönchengladbach-Fans! The Logo-SVG comes from Wikipedia. I just placed it on the chest and seperated the Torso-Part into three seperate STLs to…
Using double sided adhesive tape, I put two of these U-Shaped thingies into on of the Kallax-compartments and put a plastic pipe in it. Now my kids do use it as a wardrobe for their doll clothes. Really easy and the clothes are organised…
Fits exactly the existing bracket that gets fixed to the wall.
The referenced original device seems to be not supported any more and spare parts seem not to be available any more. "Thermo Scientific Sorvall Evolution RC Superspeed Centrifuge"…
adjusted the model for iPhone 16Pro..
Fits the popular fence type Double bar fence/"Doppelstabmattenzaun".
Original Part was pretty good design wise already. NO Supports required.
As a remix this THING uses the original version but provides two-coloured versions of the 3 large components of the tower. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 3 Rafts: Yes Supports: Yes Resolution: 0.4 x 0.15…
active charging cradle for a brodit car mounting platform
This pulsonic toothbrush comes with a stand for charging it. As my wife and I do have the same one, and the batteries are quite good, we don't need both charging docks in the bathroom. Usually it is enough to charge them over night every…
Without support. They are tricky to print. I tried bigger batches, but they do get loose on the platform. Therefore I do print them one at a time only. Hints appreciated. (If I print three at one usually one fails and flips over, of I…
Additionally, to the two printed components, you do need a spring (Ø ~ 5.5 mm and 17 mm height) a rod, e.g. aluminum or steel (Ø ~ 5 mm diameter, 25 mm length). Place it on a wall with double-sided adhesive tape. Print Settings Printer…
Designed for one particular remote control for a Lumière-Floorlamp. I guess that same Remote control will be used for other Lamps as well: Reference: - https://lumiere-design.de
adjusted to the iPhone 16ProMax (incl. compact cover)
Blumentöpfe, die gedacht sind, um sie auf ein Geländer zusetzen, haben häufig zu viel Spiel und können stark wackeln und wenn sie auf ein Gitter oder ein sehr dünnes Geländer aufgesetzt werden. Dieses Klemmelement kann auf ein Gitter…
This is a new requirement in basically all households: a rack to put your face mask, ideally placed directly next to your apartment door. It's inspired by the actual coat rack we have, just scaled down. This board provides 5 spring-loaded…
This tray can be fixed to a wall within a shower with the waterproof Tesa Powerstrip hooks ( http://www.tesa.com/consumer/tesa-powerstrips-waterproof-hook-plastic.html ) - The holes at the back do fit the hooks perfectly. The lettering in…
Inlay for a Grafitrax Base. This one is good for catching flying or falling balls, that tend to hit their target with a certain spread width. So in combination with a Trampoline (e.g. https://www.printables.com/make/3072806 ), Cannon (…
Right now, I replaced the former “foam-spring” by a coil spring combined with a printed coil spring guide. My next to do will be designing an actual printed spring and testing different material (e.g. TPU95). - Second Image provided shows…
I used 2 Supermagnets (19x13x5 mm) magnets to fix it to the bottom side of a metal book rack. The wlubs we are hanging are kids clubs, so they are light (190g each). There is space for a third magnet (pocket with reduced material…
The Nuki Doorlock drive works best when the torque of the drive ist best supported. To avoid leaving marks on the door lock I do use the adhesive option. To fill the gap between the mounting plate and the door I created this additional…
Concrete or quick-setting cement is really difficult, white casting Powder word quite well. The one I used recently is “Raisin 200 - ”extra strong". It can easily be colored by adding small amounts of pigment powder when mixing it.
This Cup is compatible to the roller bearing that is part of https://www.printables.com/model/1402072-paralane-rotating-desk-organizer. created with OnShape:…
Cradle to hold and charge your Phone - in this case done and shown for a iPhone 12 with a very lean case. BoM: Brodit vehicle mount |…
Part broke, modeled it, printed it, works. 💁♂
strengtheness the standard plastics taps on water barrels, increased wall thickness of the design, 3 to 5mm.
Mould version of the "Silver Stand" to mould using concrete or white casting powder
Assembly Overview: Compact machine-vision optical head integrating high-precision camera alignment, illumination, and mechanical mounting components. Core Components & Motion: Built around a Standa multi-axis tilt platform (e.g. 6TP115 )…
These are all currently available results.
