Counting matching models…
Bin for IKEA SKADIS. The model has attachable hooks so they can be easily reprinted if they ever break. Sizes Small Size: L: 90mm / W: 90mm / H: 40mm Medium Size: L: 170mm / W: 90mm / H: 40mm Large Size: L: 245mm / W: 90mm / H: 40mm…
Simple Caliper holder for IKEA SKADIS. Should fit a wide range of calipers. ------ I printed with these settings: Resolution: 0.2 Supports: No Infill: 20% (Cubic) Rafts: Skirt Filament: Prusament PETG Signal White / Prusa Orange ------…
For easy branching and connecting of the 4.6 mm Supply Pipe or 4.6 mm Drip Irrigation Line. ------ I printed with these settings: Resolution: 0.15 Supports: Yes Infill: 20% Rafts: Skirt Filament: PolyMaker PolyLite PLA Pro Grey
Pliers holder for IKEA SKADIS. ------ I printed with these settings: Resolution: 0.2 Supports: No Infill: 20% (Cubic) Rafts: Skirt Filament: Prusament PETG Signal White / Prusa Orange ------ Check out my other SKADIS accessories to create…
The Build Plate Guides help you place your PEI build plate quickly and aligned on the magnetic print bed. Compatibilitys The guides are compatible with any 250x250mm third-party plate. The guides are compatible with the Accessory Bins for…
For better grip, you can add some anti-slip adhesive tape at the bottom of the ice cream. I printed with these settings: Cone Layer Height : 0.2 Supports : Yes (Tree) Infill : 5% (ZigZag) Rafts : Skirt Ice Cream Layer Height : 0.12…
This tripod is made in 2 pieces: Main Body Leg (Print 3 times) This Model can be printed without supports. I recommend the use "super glue" to glue the legs to the main body. 3D printing settings Body: Resolution: 0.2 Supports: No Infill:…
Faceplates designed for the GEN2 Decor Drawers by Jerrari. ------ I printed with these settings: Resolution: 0.16 Supports: No Infill: 15 % Only one wall on first layer View from below Print face down and rotate the model by 45 degrees…
Ruthex Deburrer holder for IKEA SKADIS. ------ I printed with these settings: Resolution: 0.2 Supports: Not need, but you can Infill: 20% (Cubic) Rafts: Skirt ------ Check out my other SKADIS accessories to create the best storage for…
Files holder for IKEA SKADIS. Used kit: Stanley Nadelfeilen-Set There is a version without logo. The model has 4 holes for the hooks, but you can only print 2 of them. ------ I printed with these settings: Resolution: 0.2 Supports: No…
Faceplates designed for the GEN2 Decor Drawers by Jerrari. ------ I printed with these settings: Resolution: 0.16 Supports: No Infill: 15 % Only one wall on first layer View from below Print face down and rotate the model by 45 degrees…
A simple scalpel (and 2 spare blades) holder for IKEA SKADIS. Suitable for scalpels with a diameter of ≤10mm. Used scalpel kit: Wedo Scalpel and Replacement Blades/78621 [ https://amzn.eu/d/i4QMuzI ] ----- I printed with these settings:…
They fit on 20mm pipes of the RepRack Filament Storage System 20mm Version . I dont have a multicolor printer, so i did this easy glueable workaround. The 29 x 90mm Version is for Brother DK-11201 labels used by Brother QL-Label printers.…
Light Bar Mount for the AnkerMake M5 using a Philips Hue Play Lightbar. You can use the original M3-.50 x 10 Screw by Philips. ------ I printed with these settings: Resolution: 0.2 Supports: No Infill: 20% (Cubic) Rafts: Skirt Filament:…
I was looking for a way to hang the RackRoller by Repkord with filament spools on the SKADIS Pegboard. So i created these brackets. There are two versions: 19mm Version This Version has the same dimensions as RepRack by Repkord.…
Size of AnkerMake M5 Plates: 250x250mm. You have to print: 1x Left Side (with or without logo) 1x Right Side 4x Hooks (1x Logo, optional) I printed with these settings: Left/Right Resolution : 0.2 Supports : No Infill : 20% (Cubic) Rafts…
I remixed this model by OloDeepdelver so i can put a 250ml spray of isopropyl alcohol to the AnkerMake M5 printer. This way i always have quick access to the spray. ------ I printed with these settings: Resolution: 0.2 Supports: Yes (only…
This is a PTFE Tube Holder for the RackRoller by Repkord . Bill of Materials 1x PC4-M10 pneumatic fitting Options Crossmembers For Linking together Rollers: You have to print a 3rd 7mm diam crossmember or you can use something else. I use…
A remix of the cover lid of asjolund's Logitech StreamCam cover for non multicolor printer. I printed with these settings: Cover Lid & Logo Resolution : 0.12 Supports : No Infill : Don't care Rafts : Skirt I used 6 top and bottom layers,…
These are all currently available results.
