Counting matching models…
5 Sizes of butterfly inlay templates for woodworking. Ideal to use with flush cutter. Just screw them to a piece of wood and cut a bigger tenmplate. 128mm 89mm 59mm 48mm 37mm
Harry Potter Hogwarts Crest Wand Holder for any Wand.
Hi, Since I had a lot of play in my Toolheads after a few toolchanges, I was wondering why. After checking I saw that the glue of the pins was very flexible and I did not like the glued version at all. I was wondering why nobody had the…
Hey, This is my triple coat hook, easy to print. William
Hey there, this is my strong design for a Wall Mount on top of the printer, using the IKEA Stuva Pole 17225 which is clipped into the wall mounts. Just print as much as you need and use the Stuva pole. UPDATE 13. Sep 2023 I added two…
Hi, Here you can find an PTFE Hub for getting through the walls of an enclosure. Since my prusas moved into their own shelf and the dryers are mounted on top, I needed to get through the wooden plank. In my case it was 25mm, but if you…
Hi, This is a sound capsule for a modeltrain speaker with 11x14,5mm size. You can adjust the height by cutting the upper part in youre slicer. If you need a bigger one, just write me a comment. You can find the speaker here:…
Hi everyone, Im back with a big update on my sovol sv01 conversion. After not beeing very happy about my old design I decided to use a longer tested idea and remixed the mainparts and added an adapter plate for the sovol sv01. The…
Hey guys, this is my 55mm lens cap holder for any standard camera strap (10x1,7mm). The advantage of this design is for me the tiny size. Without the cap you wont recognize that there is something on your strap. Ill add some more…
Hey everyone, THIS VERSION IS OUTDATED, YOU CAN FIND THE UPDATED VERSION HERE: https://www.printables.com/model/704286-new-sovol-sv01-bmg-e3d-v6-5051-conversion-dissed Here you can find the files for my Conversion of my Sovol SV01. When…
Hi, This is a sound capsule for a modeltrain speaker with 10mm diameter. This fits even in older and smaller locos. You can adjust the height by cutting the upper part in youre slicer. If you need a bigger one, just write me a comment.…
Hey Guys, this is my belt tensioner for the TronXY x5s. This can be used on any XY Core Printer with alu profiles. You can just add it to the frame and put the nuts into the wholes. Category: 3D Printer Parts
Hi, This is the adapter pin that is needed when using the Reich thermostat adapter from thingiverse (https://www.thingiverse.com/thing:5543784/). This one is adapting the Reich thread to a 30mmx1,5mm thread. Because of the lenght of the…
Hi, SHORT INFO: The second picture shows the older version, without a barrier behind the pad. Its just added to show the position, when the toolhead is mounted! Because Oozing was one of my biggest problems I added these Cleaning Pads to…
Hi, I designed a DJI o4 camera mount, based on the given dummy. The camera has to be slided into the mount, with the cable being on the upper side. Inside of the mount there are clips, gripping into the lens. My recommondation is to print…
Hey, Just put the original USB cable in and charge your JBL E65 BTNC on your desktop.
This is Fan Shroud for CPAP with the CHC XL with heatzone extender.
Hi, As the title says: This is a Mount for the Speedybee F405 on the Heewing F01. You can use the original screws from Heewing, but will have to use longer M2 screws for the standoffs. M2x8 should be fine. Have a nice one.
Dieses Deisgn habe ich 2015 für das Hörbuch von “Das Lied von Eis und Feuer” entworfen, um ein passendes Case bieten zu können. Alle Rechte für Symbole und Namen der Serie liegen natürlich bei den Rechteinhabern, wie George RR Martin.…
This is our version of Prusa Covid 19 Mask ribbon. Printed with TPU. There are 2 different versions, for lager and smaller printers, but with the same lenght. Made by Soldex Category: Fashion
Hey guys, this is my Cookie Cutter of the tweaker. I also have a cutter for the krieger. ;-) visit: racequadgear.de Category: Kitchen & Dining
Hi, You will find here an adapter for the OUILA LED CEILING LIGHT. Its a 18W LED light. The adapter uses 2 wholes for mounting it to the wall, because the lights are very light :D You just have to insert the 3 M4 nuts from the backside.…
And here comes my Krieger Cookie Cutter ;-) visit: racequadgear.de Category: Kitchen & Dining
Hi, With this file you have a ceiling mount for all 100mm lamps. You can use it instead of the standard lamp base for more space for any electronic components, just like shelly. You will need two M4 Nuts and M4x10mm screws. They can also…
Hi, Maybe you can use it for your modeling or just because you lost the original one: this is a model of the camera dummy from the Heewing F01. Fits perfectly.
Hi, I edited the given cap and made a good printable version. youll have to insert the antenna protector first and insert the o4. I cut a bit of the elapor to have the usb-c port accessible. Also the camera needs a small cut, if youre…
Hi, I made this model for screwing parts into a 19" rack. I needed to invert the hat rail and had no way to reach the nuts to hold them. So I designed this mount. You can just put the nut into the mount while printing, at 5,5mm height,…
Hi, Just combined these two models.
These are all currently available results.
