Counting matching models…
remix of thing 2599815 , all credits for the models go to Klomeister. i uses meshmixer to resize the model (with 190mm) , make it hollow with a 2 mm shell and add a 70mm hole in the top. Print Settings Printer: HyperCube Rafts: No…
tool for triggerpoint massage. despite the look it is not designed to put it in somewhere and if you do things like that don´t tell me! my other massage tools Massage Roller Duo Massage Tool 2 Print Settings Printer: Creality Ender 2…
Information: little massage roller - fully 3d printed. NOW: faster and easier to print less parts improved stability more options let me know how/if it works for you, would be happy to see some "makes" Updates 20221221: Uploaded new model…
my take on a headset stand. i would recommend to print it in 110% size depending on your headset printed with Motedis PLA "Hot Red" Model = standing Model = printing orientation, size should be X,Y 212mm, barely fittint an std. print…
Information: little massage roller - fully 3d printed. "pointy" and flat rolls. let me know how/if it works for you, would be happy to see some "makes" Updates ### 20181209: Update Roller2.stl had an "error" in the stl which is now…
the 3 year old son of a friend what to shave with him every morning - so in designed the this toy razer for him. the orgininal one is about 75mm the bigger one (150% 115mm). Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: No…
Massages Tool v2 just an less pointy variant of my version 1 my other massage tools Massage Roller Duo Massage Tool v1 Print Settings Printer: Tronxy X1 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15% or higher…
Holder for 4 Markers, the slight angle makes is easy to use, should fit for standard whiteboard markers V2 mounting holdes to screw (to a wall) holes for 4 6mm diameter 3mm height magnets (have to be glueed in) V3 mounting holdes to screw…
i quickly created a fishing set, all the commercial ones had strange fish forms. Each of the fished has one 6x3 (6mm diameter 3mm heigt) magnet embedded (this was what a had on hand) should be a tight fit The fishing rold uses a screw or…
simple box for a dual USB module slide in the terminal side first, then press in the USB side - this is a tight fit Category: 3D Printer Parts
fenders for a LANDROID W500 to keep branches from getting stuck. Print Settings Rafts: No Resolution: 0.2 Infill: 20%+ Filament: Bavaria3D PETG Black Notes: use a brim. Category: Outdoor & Garden
Sorter Boxes for some time i tinkered to find the optimal box for sorters > feel free to request the sizes you need !! ramp to get small parts out place for labels and to get the boxes out easy to change for different sizes overview…
a open flower power pod for orchids. i own only only so no idea jet if this is optimal Print Settings Printer: Tronxy X5S MGN Custom Rafts: No Supports: No Resolution: 0.2 or lower Infill: 20%+ Filament: Noname PLA Transparent Notes: make…
2018.04.06 Update: the all printed link piece works best in xy scaled to 102% so i uploaded Link3_Ring_102.stl Tipp: thread the ring an the link piece just right to the and to avoid breaking them in joining. I needed an extra arm for my…
.. see photo :) required really good cooling, used PETG for more flex. Filament ist PETG Silver from Extrudr Print Settings Printer: Kossel Delta Printer Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Notes: i used support for the…
The original setup blow air everywhere, with the shroud the air is directed directly to the coldend. use the stock screws for mounting. Print Settings Printer: FuseBox2R Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Amazon…
i was not happy with the shape of my DAV3 and a wanted something really light. 26.3g in PETG low profile fingertip grip no sidebuttons all screw reused from the original Vitamins: 4x 6-7mm dot skates Feel free to request changes or share…
Replacement for original fan holder. the original 40x40mm fan air guides are still used Print Settings Printer Brand: RepRap Printer: I3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: print on the flat side! Category: 3D…
Air Duct for the TaoTronics 5L Humdifiert (see Picture) I could not let me run on high or moisture would build up on surfaces below it. The Air Duct lets the fog travel i longer distance an mixes it with air - now it work even on high.…
Tested for: W2442PE W2242T Please let me know if it fits on other models! this is my second version of a headset holder for LG Flatron W2442PE and similar models. It is easier to printe, uses less material and is stronger.…
A headset holder which simply snaps on the Frame of a Flatron W2442PE or other modells which have a similar frame. Since it needs tight tolerances to work i doubt it will work an other Monitors. 20160303: Update v4 prints without support…
I filter for a P3 Matrix (makes dot to squares) for: https://www.instructables.com/id/Morphing-Digital-Clock/ Print Settings Printer: Anycubic Chiron Rafts: No Supports: No Resolution: 0.2 Infill: does not matter. Filament: Devils Designs…
Hi, the 2 parts interlock no screws required, than simply snap onto the monitor. print holderleft to attach it to the left side of your screen. mades welcome. Print Settings Printer: Creality CR10 Rafts: Doesn't Matter Supports: No…
5.2V DualUSB Case 20210412 Update: i added a 34mm version because i discovered a variant of the board which is slightly larger *attention: this is one time in - never out. optimized for 0.4 mm Extrusion Width no screws or other hardware…
This is my 3rd iteration of a spool holder for my P3Steel. Bearing have been proven to be userless it work better without. Hardware needed are 3 M3 screews and nuts. please share your makes ! Print Settings Printer Brand: RepRap Printer:…
These are all currently available results.
