Counting matching models…
Mount any device with a keyhole slot to a din rail. Print settings Any "normal" print settings. Material: PETG (preferably). Lay part on its side! Required hardware Single M3 screw. Instructions: Print 2x and screw in M3 screws in the…
Print Bed / Gasket Scraper Tool A compact and sturdy scraper designed for removing finished prints, purge lines, blobs, and other leftover filament from your 3D printer's build plate. Also works for removing gasket material without…
A Heart Keyring. Print settings Any material 1-4 parimeters 10-30% infill No brim or raft needed. <3
Please note: Print at fine resolution. Print with small line width. Use ironing. 80mm max size (due to lip) For 3 colours: In PrusaSlicer. Pause print at suitable hight. When printer pauses, change filament and continue. Made and rendered…
This is a collection of round and square steel pipes that can be used in CAD aswell as 3D printed. They have a small fillet on the edge. Square 20x20x1000mm 25x25x1000mm 40x40x1000mm Round ⌀20x1,5mm ⌀25x1,5mm Made and rendered in Fusion 360
Mount for attaching AS5600 encoder to Nema 17 Stepper Motor. The mount comes in two versions. Easy-to-print version Prints without supports. Requires longer mounting screws. Compact version Requires print supports. Allows the use of…
140mm Fan spacer. 5mm high. 5mm Holes. F3d uploaded if you need to change anything.
Please note: Print at fine resolution. Print with small line width. Use ironing. 80mm max size (due to lip) For 2 colours: In PrusaSlicer. Pause print at suitable hight. When printer pauses, change filament and continue. Made and rendered…
Please note: Print at fine resolution. Print with small line width. Use ironing. 80mm max size (due to lip) For 2 colours: In PrusaSlicer. Pause print at suitable hight. When printer pauses, change filament and continue. Made and rendered…
Please note: Print at fine resolution. Print with small line width. Use ironing. 80mm max size (due to lip) For 3 colours: In PrusaSlicer. Pause print at 2 suitable hights. When printer pauses, change filament and continue. Made and…
A mount for 3 ø16mm buttons. 2x Screw ø5mm holes are available aswell as ziptie mounting holes! I have mine connected to a Wemos D1 Mini and use them for Lights On/Off Blinds Open/Closed Fan On/Off Most materials will work and use normal…
This project uses a Creality K2 strain gauge , an HX711 amplifier , and an RP2040-Zero to detect when the nozzle touches the print bed. Unlike a BLTouch or other external probes, the nozzle itself is used for probing , so there are no…
Reduces turbulence. Can be scaled in slicer.
This is an easy to print Circle template. No support required. Print with any settings, however a large line width may screw with the size of the holes!
Please note: Print at fine resolution. Print with small line width. Use ironing. 80mm max size (due to lip) For 2 colours: In PrusaSlicer. Pause print at suitable hight. When printer pauses, change filament and continue. Made and rendered…
A small easy to print bookmark shaped like a cat! Made originally for a friend.
A small collection of different length aluminium extrusions! Mainly for use in CAD, but feel free to do whatever you want :)! T-Slot 30x30 100mm 200mm 250mm 500mm 750mm 1000mm V-Slot 20x20 100mm 200mm 250mm 500mm 750mm 1000mm (Dimentions…
Features: Gear ratio of 1:13 Self locking/ No backdrive possible thanks to worm drive! “Sealed” (grease/lubricant can be used) Small form factor. Adaptable mount. Requirements: 3D printed parts. 2x - 21x15x4mm rollerbearings. 4x - M3 heat…
21mm x 21mm x 21mm A B C X Y Z
This IKEA SKÅDIS-compatible holder is designed to store 6.3mm (1/4") hex shank drill bits , drivers, and other accessories. It keeps everything neatly aligned, easy to access, and visually clean — perfect for workshops, garages, and maker…
NOT TESTED OR PRINTED! Stepper motor controlled adjustable Air vent. Print 1 of each part. Requires an m5 bolt. 120mm fan compatible. (105mm between center of holes). Compable with 28BYJ-48
Please note: Print at fine resolution. Print with small line width. Use ironing. 80mm max size (due to lip) For 3 colours: In PrusaSlicer. Pause print at suitable hights. When printer pauses, change filament and continue. Made and…
Easy to print overhang test print. Overhangs are: 55°, 60°, 65° and 70°. Print settings: Cooling ON Supports OFF External perimeters should be printed last. My results: 55 degrees - Close to perfect! 60 degrees - Acceptable, slight bow in…
Radial overhangs are different from “standard overhangs” as they are much more supported during printing. They can therefore achieve higher angled overhangs without support material . Features Angles 55°, 60°, 70°, 75° and 80°. Required…
5mm pc case fan spacer for 80mm fan. Self tap and though hole design.
I liked Dawnbringer6 design so I scaled it down to fit 58mm diameter slim/sleek aluminium cans. Print settings Support ON 0,30mm layer hight. 0,4mm nozzle. 0,52mm layer width
Compact Low-Friction Filament Guide This is a compact, low-friction filament guide designed to keep your filament feeding smoothly. It helps reduce drag and unnecessary resistance. DESIGNED FOR TOP MOUNTED SPOOLS. Required hardware 3 x M4…
This Thread Tolerance Torture test allows you to try and print some common threads (M2, M3, M4, M5, M8, M10, M12). Made in Fusion 360 with the thread tool. Print at fine resolution!
Places current sensor on top of L298N. Requires M3 x (35) or 40 screws
Please note: Print at fine resolution. Print with small line width. Use ironing. Too much cake is unhealthy. 80mm max size (due to lip) For 3 colours: In PrusaSlicer. Pause print at suitable hights. When printer pauses, change filament…
Please note: Print at fine resolution. Print with small line width. Use ironing. 80mm max size (due to lip) For 2 colours: In PrusaSlicer. Pause print at a suitable hights. When printer pauses, change filament and continue. Made and…
Save your toes wit this super soft corner bumper ! Note: Can be scaled in any slicer! Works anywhere with 90° bend! Attatch with a dab of hot glue. Easy to print and use! Print settings: Print with TPU! Few parameters! Low infill! Made…
Tried and tested on “Huawei Watch GT2” Band is 21,5mm wide. Print with solid TPU. Designed and tested with 95A hardness TPU. Print one pice at a time for lowst strining if that is an issue.
My (PROTOTYPE) take on a DEEJ hardware mixer. Requires 4 potentiometers and some m4 screws. Can (mabye) be used with screws. I hot glued a magnet into the slot.
Easy to print small and strong Ziptie mount. 4mm screw hole. Zip tie max width 5mm and max height 2,5mm.
Case for ESP8266 WEMOS D1. 2x 4.5mm screw holes!
Please note: Print at fine resolution. Print with small line width. Use ironing (pun intended) 80mm max size (due to lip) For 2 colours: In PrusaSlicer. Pause print at suitable hight (around 2,45mm with slider on left). When printer…
Angled holder for Makita DF330D. May work for ther models aswell.
Storage for Engineer SS-02 desoldering pump along with spare tube. Print with: 2-3 parimeters 2-3 top/bottom layers 0,2mm layer hight 10-15% infill.
This is a strong hook that fits all versions of the common IKEA ALEX drawrs. Print with many parimeters for an extra strong part! Designed in Fusion 360 and made on an Ender 3 .step file included for your convinience.
Features Angles: 10°, 20°, 30°, 40°, 45°. Low waste! Print settings Use your normal print profile. How to reduce the staircase effect: Lower layer height — the most common fix. Change orientation — printing the part so the sloped surface…
This is a CAD modell of a IKEA Nordmärke wireless charger. Dimentions are as close as I could get to real one
The JAHH (Just Another Headphone Holder) is a practical and convenient solution for storing your headphones. This headphone holder comes with two angeled 5mm holes, making it effortlessly mountable on any suitable surface. With its sturdy…
Magnet size: 10mm length 3,5mm wide (25mm high, optional) Fits standard Esp32-cam. I printed with 0,15mm layerhight.
A squiggly line test print for 3d printers.
A collection of 18 calibration cubes (20×20x20mm) with wall thicknesses ranging from 5 mm down to 0.35 mm in small increments. Why use this set? Quickly spot over- or under-extrusion. Check if your slicer and printer produce accurate…
Information: Ender 3 hotend. High airflow over heatsink. ONLY tested with “standard” ender 3. Works with any 40 mm fan and compatable with 5015 centrifugual fan. Required hardware: 6pc M4 bolts and nuts. Lengt depends on your fan. I used…
Ender 3 horizontal spool holder. Has 2 4mm holes in bottom for screws. Mine is mounted in a weight sensor. Requires filament guide!
Easy to print radii tool. Can make any part of a circle with diameters from 220mm to 440mm
I wanted my DEEJ audio mixed directly integrated in my PC, so I made this. It uses 3 potentiometers and an arduino and mounts in standard 5,25" bay. I then ran the USB cable on inside of computer and back to usb ports on the motherboard.…
Adapter for ASUS TUF H5 speaker driver to Openmod yoke. Requires removal and resoldering of original speaker cable for right driver. Original screws will work.
Gridfinity box for under desk/under shelf. Inside dimentions are 169x169x58mm. Snuggly fits 4x4 gridfinity, which should be 168x168mm! Knob is attatched with short m5 bolt. Other screw holes are 5mm.
These are all currently available results.
![Ender 3 - High Airflow Hotend [5015 & 4020 fans] with BL touch!](https://media.printables.com/media/prints/713425/images/5640002_a436c5f8-b4a6-4800-b5fa-2862e1f53f88_392e527a-f954-4aea-8cb7-fba0b5315106/ender_3_diy_hotend_2024-jan-13_07-40-24am-000_customizedview5402427600.png)
