Counting matching models…
John Deere 4020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
Basic picnic table. Works with 0.4mm nozzle, though 0.2mm would be better. 1:64 Scale for Toy City and Farm Displays.
Basic LP Gas Tank 1:64 Scale
Inspired by the GrainMax line of hopper bins by Meridian. Handle and Lid need M1 x 6mm screws to be attached. Bin has indent marks to guide a M1 drill bit. Ladders push into place. Additional holes can be drilled to attach string from the…
Mini Chicken Coop 1:64 Scale Large enough to house 4 chickens
John Deere 3020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
Timberjack 240A - 1:16th Scale Holes will need to be drilled out for screws. These holes are marked with indents. Uses M4 and M2 screws. Uses M2 x 200mm Rods
1:16 Scale of a Big Bud HN-350 Uses M4 & M2 Screws Uses Chunky Tires and Rims (See other models from us) Engine and Front Grill recommended to be resin printed
John Deere 530 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 8.75in (6.4mm x 222mm) rod used for rear axle 4mm rod used for steering wheel (Used an M4 Screw…
Basic Porch Chair 1:64 Scale City and Farm Displays
Case 930 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 8.875in (6.4mm x 255.4mm) rod used for rear axle M2 rod used for steering wheel
Basic hopper bin with Auger. Holds 160 Bushel. 1:64 Scale
Basic Chunky Tire with several sizes of rims. Scaled for 1:16 models.
Basic Picnic Table with Umbrella 1:64 Scale Top of table with has indent to mark where a 2mm hole is to be drilled. Umbrella has 2mm hole modelled in. Use 2mm rod to secure umbrella over the table.
Just like dad/grandpa had at the farm growing up. This 1:8th scale tractor is sure to be a show stopper on your display or shelf. Uses M4 and M2 Screws
***Updated March 2026*** Winged Chisel Plow - 26 Shank 30ft - 1:16th Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to…
Case International 4894 Tractor - 1:16th Scale Uses M4 & M2 Screws M2 Rod used to mount mirrors to cab
Cat 3208 Engine Multiple Scales (1:8, 1:10, 1:16, 1:64)
Chisel Plow - 14 Shank - Style 1 - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
Allis-Chalmers 7580 4WD - 1:16th Scale Uses M4 and M2 screws
Basic Hopper Bin Holds 400 Bushel 1:64 Scale
Versatile 935 4WD 1:16th Scale Uses M1, M2, and M4 screws
Stalk Shredder Chopper - 1:16th Scale - Inspired by the John Deere 27 Stalk Shredder Uses M2 and M4 screws We used 3mm diameter Rivets to hold the tires on, but M3 Screws work too. Some areas that need holes drilled for screws have been…
Basic Porch Swing 1:64 Scale City and Farm Displays Tree Supports recommended.
Need to spray your fields. Look no further. This 1:16th Scale Terra-Gator can get the task done.
Basic Firepit 1:64 Scale City and Farm Displays
Oliver 77 Row Crop - 1:8th Scale Assembly instructions in the download section Uses M4 and M2 Screws
International 4366 4WD 1:16th Scale Uses M2 and M4 Screws
Now With Assembly Instructions! Oliver 2655 4WD - 1:16th Scale Uses M2 and M4 screws Uses two 6.4mm diameter x 178mm (1/4in diameter x 7in) rod for axles Parts that need M2 and M4 holes drilled have indents.
Manure Slurry Tank Wagon - 1:16th Scale Uses M4 & M2 Screws Certain holes will need drilled. Indents on parts show drill locations Two 6.4mm x 152.4mm (0.25in x 6.00in) rod for axles Needs rubber hose with 10mm Outer Diamater x 8mm Inner…
International 4586 4WD 1:16th Scale Uses M2 and M4 screws
Manure Spreader - 1:16th Scale Uses M2 Screws and 6.4mm diameter x 138mm(1/4in diameter x 5-7/16in) rod for axle 1.75mm TPU can be used for hydraulic hoses
Chisel Plow - 10 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
Fontaine Renegade-Magnitude Trailer - 1:18th Scale Uses M4, M2, and M1 Screws Uses two 6.4mm (0.25in) x 120mm (4.75in) Rod for axles Need to make 24 Outrigger Parts
Chisel Plow - 12 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
Transcraft Eagle Stepdeck Trailer - 1:18th Scale Uses M2 screws Uses two 6.4mm (0.25in) x 120mm (4.75in) Rod for axles Included in file are alternate tool boxes with diamond plate façade. Larger parts divided to fit on 400mm x 400mm print…
Round Bale Feeder - 1:16th Scale Real life dimensions: 8ft diameter x 4ft 3in height Print with tree supports for easier post processing.
Case 2470 Tractor - 1:16th Scale Uses M4 & M2 Screws Uses Chunky Crab Planetary Rims and Tires (See other models from us)
White 4-210 Tractor 1:16 Scale Uses M4 & M2 Screws
Case 4890 Tractor - 1:16th Scale Uses M4 & M2 Screws M2 Rod used to mount mirrors to cab
John Deere 4020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
Minneapolis-Moline 1938 Truck Tractor - 1:16 Scale Uses M2 and M4 Screws Front Axle: 3.2mm x 97mm (0.125in x 3.875in) Rod Rear Axle: 6.4mm x 133mm ( 0.25in x 5.25in) Rod Tree supports recommended for chassis/main farm parts
Wishek - 16ft Offset Disk - 1:16th Scale Uses M2 screws Hydraulic Pistons use 3mm x 25mm rivet for shaft M3 Screw or 3mm rivet can be used to fasten wheels to axles 14ft Offset requires 43 copies of 28in disk blades and 1 copy of 25in…
Chunky Crab Planetary Rim - 1:16th Scale Uses M2 and M4 screws Basic Chunky Crab Planetary Tire with several sizes of rims.
John Deere - Suitcase Weights with Bracket - 1:8 Scale Designed to fit 1:8th scale John Deere tractors. Uses M4 Screws
John Deere 48 Front Loader - 1:8th Scale Made to fit the 3020 and 4020 tractors I have modeled. Uses M2 and M4 Screws. Indents indicate where holes need to be drilled out. Would love to see pictures of your makes!
Case 1470 Closed Station Tractor - 1:16th Scale Uses M4 and M2 Screws Uses M2 Rod for step handles
International Harvester - Suitcase Weights with Bracket - 1:8 Scale Designed to fit 1:8th scale International tractors Comes in two different varieties. Set of 10 and Set of 12 suitcase weights with mounting brackets to match. Brackets…
John Deere 3020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
Offset Disk - 16ft - Style 1 - 1:16th Scale Inspired by the Case International Harvester IH 770 Uses M2 and M3 screws Uses 3/16 inch (4.8mm) rod to attach blades to build. There are holes that need to be drilled out. These spots are…
John Deere Rear Wheel Weights - 1:8th Scale Uses M3 screws
Case 1200 Open Station Tractor - 1:16th Scale Uses M4 and M2 Screws Uses M2 Rod for step handles Recommended to print PTO with 0.2mm nozzle, or you can use an M2 screw in place of it
Replica of an Engine used in the Structo Toy Trucks
Metal Tractor Wheel found on tractors before the days of rubber treads. 1:8 Scale Model is the left side and will need to be mirrored for the right side. Should fit nicely on 1:8th Tractors made by Ertl, Scale Models, and/or Speccast
Wishek - 14ft Offset Disk - 1:16th Scale Uses M2 screws Hydraulic Pistons use 3mm x 25mm rivet for shaft M3 Screw or 3mm rivet can be used to fasten wheels to axles 14ft Offset requires 32 copies of 28in disk blades and 1 copy of 25in…
Round Bale - 1:16th Scale Print with no supports and fuzzy skin. Real life dimensions: 5ft 8in diameter x 4ft 8in width
John Deere Front Slab Weights - 1:8th Scale Designed to fit on 1:8th Scale John Deere tractors produced by Scale Models. Uses M2 Screws to attached to tractor. Holes will need to be drilled and tapped on tractor.
International Harvester IH Tractor Cab - 1:8 Scale Made to fit the International Harvester 1066 Farmall by Scale Models Uses M4 Screws Organic/tree supports are highly recommended for cab to save on filament and headaches during post…
Massey Ferguson 1500 4WD Tractor - 1:16th Scale Uses M4 and M2 screws 6.4mm (1/4in) rod used for axles Some holes need drilled out. Indents on model show spots.
1:8th Scale International Harvester Rear Wheel Rims Four different files. No Wheel Weights Two Wheel Weights Four Wheel Weights Six Wheel Weights
Wishek - 16ft Offset Disk - 1:16th Scale Uses M2 screws Hydraulic Pistons use 3mm x 25mm rivet for shaft M3 Screw or 3mm rivet can be used to fasten wheels to axles 14ft Offset requires 39 copies of 28in disk blades and 1 copy of 25in…
Replica of an Engine used in the Structo Toy Trucks
International Harvester IH Rear Wheel Split Weights - 1:8th Scale Designed to fit 1:8th scale International Harvester tractors produced by Scale Models Uses M3 screws to attach to tractor. Holes will need drilled and tapped in the wheel…
Case 1470 Open Station Tractor - 1:16th Scale Uses M4 and M2 Screws Uses M2 Rod for step handles
Disk Chisel - Glencoe Style - 9 Shank - 1:16th Scale Uses M2 Screws. There are holes that need drilled out. Indicated with indents.
International Harvester IH Rear Wheel Weights - 1:8th Scale Designed to fit 1:8th scale International Harvester tractors produced by Scale Models Uses M3 screws to attach to tractor. Holes will need drilled and tapped in the wheel rims to…
Mounted Chisel Plow - 9 Shank 10ft - Style 1 - 1:16 Scale Uses M2 Screws and Two M2x100mm rods There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the…
Disk Chisel - Style 1 - 11 Shank - 1:16th Scale Uses M2 Screws. There are holes that need drilled out. Indicated with indents.
1:8th Scale John Deere Heavy Cast Rear Wheel Rims
Field Mulcher - 16ft - Style 1 - 1:16 Scale Uses M2 Screws and three M1x4mm screws There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import…
Farmall H Steel Wheel Set - 1:8th Scale Made to fit the Scale Models 1:8th Farmall H.
Mounted Chisel Plow - 11 Shank 13ft - Style 2 - 1:16 Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import as…
Mounted Chisel Plow - 13 Shank 14ft - Style 1 - 1:16 Scale Uses M2 Screws and Two M2x100mm rods There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the…
Mounted Chisel Plow - 9 Shank 11ft - Style 2 - 1:16 Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import as…
Mounted Chisel Plow - 13 Shank 15ft - Style 2 - 1:16 Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import as…
Mounted Chisel Plow - 9 Shank 10ft - Style 1 - 1:16 Scale Uses M2 Screws and Two M2x100mm rods There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the…
Field Mulcher - 14ft - Style 1 - 1:16 Scale Uses M2 Screws and three M1x4mm screws There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import…
John Deere Rear Wheel Rims - 1:8th Scale Will fit the 1:8th scale John Deere 4020 and 3020 models I have available. These can be used to replace the Scale Models 1:8th scale 4020, but the OEM tires may not fit properly. Files included in…
Field Mulcher - 12ft - Style 1 - 1:16 Scale Uses M2 Screws and three M1x4mm screws There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import…
John Deere Rear Wheel Rims - 1:8th Scale Made to fit the Scale Models 1:8th scale tractor. Will also fit the 1:8th scale John Deere 4020 and 3020 models I have available. However, since the rims needed to accommodate the OEM tire, there…
These are all currently available results.
