Counting matching models…
Spare part for Pioneer SPH-10 / SPH-20. You have to disassemble the Phone Holder to insert the Brackets. Printed easy with PETG or so. Filament of the picture: translucent watergreen from dasfilament.de
Inspired by the "Ultimate Extruder" I created this modification which includes all original parts. The position of the nozzle as well as the leveling sensor remain exactly the same, even identical in Z to the tenth. So you don't have to…
You just need m3 Screws, 25mm and 10mm long and now you can clamp the shaping sensor on the 9mm MK8 nozzle.
Replacement for broken door rolls. Printed in PETG and 0.1mm Layer heiht. It may need to be slightly scaled because of different printers.
To replace the unstable housing, I designed this printable, stiffer housing for the original parts and positions including the TR sensor. The partcooler can be replaced even though the 4010 fan is mounted. For the thread insert threads…
This is the baseplate, reverse designed thru my Q5 Project. I does cnc-mill this this with Aluminium for less weight and better thermals. There is a STEP-File for engineering. See my Work here: https://youtu.be/03k-3chBYmc
This massive stairs was printed on my Anycubic Chiron with 0.6mm Nozzle, 2 Walls and 8% Infill, without any supports but 30mm brim! Filament Use was about 400g. On the highest point it is 416mm high. To print the right side of the stairs,…
I was searching for a good Description of the original Hotend Parts for my Q5 to replace the original Bore-Heatbreak to an Allmetal one, for example "Slice Engineering" or so. But, i don't found an helpful Information so i decided to…
To proof, if a expensive rail mod is worth the upgrade, this is a minimal-invasive mod. i wanted the cheaper MGN12H carriage but it not fit between the v-slot holes. So, MGN12C is the way. Use M4x6.5 thread inserts and M4x10 screws. if a…
This is a spare part for the key of the safety switch. Suitable for McCulloch power tools. Printed in PETG in 0.15 resolution. Was printed in “transparet grey” on TRONXY X5SA-400 .
I use transparent PETG for “whiteplate” and transarent green PLA from dasfilament.de for the signs itself. An ordinary 3xAA Battery lightchain with timer function perfect fits inside. Glued with a bit of UHU acryl glue.
Now you can leave the battery inside.
Use m3 thread inserts. Better handling insteat of the nut version. I printed with petg and 100% infill.
I don't know how neccesary this mod is in 2025 but i will upload it either. Use thread Inserts for M5 and M4 for the middle part. The rest is genuine material. Have fun make chiron bed lighter ;) printed in PETG (dasfilament.de…
The 10x11 Cable chain delivered via german Amazon had a smaller space betweeen the holes and so i designed it new. this chain: Zeberoxyz 10x11mm Schleppkettenlänge 1Meter offener schwarzer Kunststoff-Kabelträger R18 mit 1Kit Endverbindern…
One of the goal for me was a lighter Printbed. So, here is the right thing. This use 500mm MGN12H with two sliders on each rail. If 600mm rail is used, the carriages can mount more on the outside. I tried to match the genuine height.…
Now the enclosure is able to hang on mast or balcony. the holes allows to assemble the solarmount and ttgo enclosure vertical or square. needs 11 thread inserts, M4x6,5mm. if other mods needed, use STEP file. 3W 6V Solarpanel Typ-C:…
These are all currently available results.
