P
PrintablesDante
Hexagon Figit Toy
Just a large table top figit toy. It is made to use the build plate for the MK3S+ or 4S. Play with it. Make designs. It locks together in both directions.
- Downloads
- 4,800
- Likes
- 121
- Rating
- 2.5
All models
Counting matching models…
P
PrintablesDante
Battery Storage
Finally! A battery box that can hold the entire package of batteries from Costco/Sam's Club. Plus, a small screwdriver that you never have nearby to open the battery compartment to change the batteries. I was tired of having battery…
- Downloads
- 2,779
- Likes
- 355
- Rating
- 4.64
P
PrintablesDante
Socket Set Organizer - Craftsman
These are socket set organizers for your tool chest drawer. I made these because I was tired of the jumble of sockets I had and the difficulty of finding what I needed. These were made for craftsman sockets. I have no idea whether or not…
- Downloads
- 1,390
- Likes
- 588
- Rating
- 4
P
PrintablesDante
Easter Peeps
Here is the lovable Easter Peep. I used Sainsmart pastel TPU. They have fuzzy skin with 5% infill (very flexible). I have included the g-code for the Prusa MK3S+. Have fun.
- Downloads
- 1,119
- Likes
- 236
- Rating
- 5
P
PrintablesDante
Food Storage (Ziploc) Organizer Boxes
Make your wife happy and get a little justification for your 3D printing hobby. Storage boxes for food storage bags: Snack, Sandwich, Quart and Gallon sizes. The three smaller sizes are one piece prints. The gallon size needs to be done…
- Downloads
- 1,076
- Likes
- 183
- Rating
- 5
P
PrintablesDante
Crescent Moon Planter
Crescent moon planter for real or fake plants. Versions with and without drain holes. Makes a nice decorative holder for an air plant or small succulent. No supports required. The top of the moon is about max for printing without support.…
- Downloads
- 476
- Likes
- 131
- Rating
- 3
P
PrintablesDante
Cat Toy - Upcycled filament spool
Upcycled toy for a spool cat toy. I have tried it on empty Prusament spools and Matterhackers MH build spools. The rings snap into place with no hardware required. It leaves about a 28mm gap in the middle for the cat to get to the ball.…
- Downloads
- 344
- Likes
- 58
- Rating
- 5
P
PrintablesDante
The Unity Heart
The Unity Heart just in time for Valentine's Day. All PLA: The heart is rose gold silk. No supports required. The pin will need a brim. Update: I found a small disconnect in the internal section of the heart. It should be fixed now.
- Downloads
- 337
- Likes
- 56
- Rating
- 4.6
P
PrintablesDante
Dyson Supersonic Wall Shelf
Here is a wall shelf built for the Dyson Supersonic hair dryer and the accessories. There are 4 - 60 x 5 mm and 1 - 50 x 5 mm steel rings built into the shelf to provide a magnetic base for the accessories. These are available on Amazon.…
- Downloads
- 317
- Likes
- 68
- Rating
- 5
P
PrintablesDante
LightSaber - Illuminated
This is a simple remix of the retractable lightsaber with a direct fit flashlight. The flashlight can be bought from Harbor Freight at $2.50 for 2. Overall length of the hilt increases by about 80 mm. The ON/OFF push button is at the…
- Downloads
- 295
- Likes
- 67
- Rating
- 4.83
P
PrintablesDante
Firestick Remote Cover
Here is a cover for your Amazon Firestick remote. It is made for TPU and will require supports. I probably should have used a different color, but I had black laying around. So, for now, it's black. The remote just slides in from the top…
- Downloads
- 217
- Likes
- 20
- Rating
- 4.5
P
PrintablesDante
Miss Kitty Tombstone from Disney Haunted Mansion
Miss Kitty tombstone from the Haunted Mansion cemetery. At full scale it is about 36 inches tall and about 12 inch square at the base. The 42% scale is just about the max to fit on the XL. I did the full scale and had to cut it into 3…
- Downloads
- 129
- Likes
- 38
- Rating
- 0
P
PrintablesDante
Facebook Jail Ornament
For all of you who have been put in Facebook jail or know a few who have, here is a way to celebrate. Nothing special. Just PLA with a couple of color changes on Prusa i3.
- Downloads
- 124
- Likes
- 34
- Rating
- 5
P
PrintablesDante
Solar Filter - Celestron 8SE
This project has been on my list for a while and this contest motivated me to get it done. This is a solar filter for a Celestron NexStar 8SE for viewing and taking pictures of the sun. The glass can be picked up through Amazon for $10 at…
- Downloads
- 123
- Likes
- 23
- Rating
- 5
P
PrintablesDante
Bird Feeder - Expandable
An expandable bird feeder to use prusament spools. Expand as many as you want. Each have has a threaded insert to screw together with a top and bottom nut. The top nut has a loop attachment to hang the bird feeder. I printed in PETG for…
- Downloads
- 122
- Likes
- 152
- Rating
- 4.5
P
PrintablesDante
Samsung Galaxy S25+ Cover
Cover for the Samsung Galaxy S25+. I did this in TPU for protection. It should work fine for PLA or PETG. Two versions: solid back and honeycomb back. 10% infill, 2 perimeters works great
- Downloads
- 110
- Likes
- 8
- Rating
- 0
P
PrintablesDante
Dumpster Fire
Loved this dumpster for the accuracy. Wife needed a dumpster fire so here it is. Flame is printed is translucent red TPU: no infill, 3 perimeters and no bottom. A standard tea light is put inside and viola: lighted dumpster fire.
- Downloads
- 107
- Likes
- 7
- Rating
- 5
P
PrintablesDante
LOTR Balrog
AI generated model of the Balrog from Lord of the Rings. Lots of supports but would be nice to print.
- Downloads
- 87
- Likes
- 12
- Rating
- 0
P
PrintablesDante
Heart Box with threaded top
For that heart loving person in your life. A heart shaped box with a threaded top that will always closed as the finished heart. The lid is also curved to have an infinite heart appearance. Printed in purple galaxy pla at 15% infill. No…
- Downloads
- 79
- Likes
- 21
- Rating
- 0
P
PrintablesDante
Cave Troll
Cave Troll from Lord of the Rings Printed in white pla on the CoreOne. 10% infill and 0.25mm layer height. Some supports are necessary but came out really well.
- Downloads
- 75
- Likes
- 7
- Rating
- 4
P
PrintablesDante
Christmas Advent Tree for Adults
Christmas Advent Calendar to help enjoy the holiday season. Holds 25 mini (50 ml) liquor bottles of your choice. Holds bottles up to 1.5 inches in diameter (with 7 spaces available to Fireball). The overall assembly is 16 inches tall and…
- Downloads
- 66
- Likes
- 18
- Rating
- 5
P
PrintablesDante
6 Pack Carrying Case - Stackable
Remix of the spray can holder for beer or soda bottles
- Downloads
- 62
- Likes
- 15
- Rating
- 0
P
PrintablesDante
22 mm E-Stop Replacement Button
For anybody that works in manufacturing, you are probably familiar with e-stops and the button breaking long before the e-stop has an issue. Here is a replacement button for a 22mm e-stop. I made it to have the white arrows and that will…
- Downloads
- 60
- Likes
- 5
- Rating
- 0
P
PrintablesDante
Love Sulpture w Fleur de Lis
Modification of the Fluer de lis to fit in the Love sculpture. Printed in silk Mardi Grau colors on the XL. Silk PLA on the XL. No supports required. 10% infill
- Downloads
- 59
- Likes
- 10
- Rating
- 0
P
PrintablesDante
Glencairn Glass Cases
Printable models for Glencairn whiskey/bourbon glasses. Available in 4 glass version, 6 glass version and 8 glass versions. Each version has separate holes for 2 oz tasting bottles: 3 in the 4 glass version, 4 in the 6 glass version and 6…
- Downloads
- 53
- Likes
- 9
- Rating
- 5
P
PrintablesDante
Gamecocks Mascot Re-imagined
Re-imagined bust of the South Carolina Gamecocks Mascot. Printed on a 5 head XL @ about 350mm tall. PLA with 10% adaptive cubic infill.
- Downloads
- 53
- Likes
- 14
- Rating
- 0
P
PrintablesDante
Santa Boots - Pair
Pair of Santa Boots to lay in front of the fireplace. Overall, the boots are about 275mm tall, printed in silk pla. The white fur at the top uses a 1mm fuzzy skin to get the effect. Printed on the XL 5H. Added: scaled for small (135mm…
- Downloads
- 30
- Likes
- 7
- Rating
- 0
P
PrintablesDante
Dewalt Battery Covers - Flexible
Flexible battery protection covers for your Dewalt batteries. Four sizes available so far: 1.5 AH, 2.0 AH, 5 AH and 6 AH. All size fit tight on the battery and do not need to be removed to use or charge. Added: Ridgid 4AH cover. All are…
- Downloads
- 30
- Likes
- 15
- Rating
- 5
P
PrintablesDante
Cue Stick Chalk Container
Small container with threaded cap to hold 2 blocks of cue stick chalk. Also has knurled surface for aesthetics. Printed on MK3S+, 2 perimeters, 10% infill. Material of your choice. I used PETG for this one. Edit: apparently some chalk is…
- Downloads
- 27
- Likes
- 3
- Rating
- 0
P
PrintablesDante
Nightmare Before Christmas Wreath
A nice version of the Nightmare Before Christmas wreath. It is scaled for the XL and does require supports. The ribbon is printed separately and fits in place on the wreath. Printed in PLA, 10% infill, 2 perimeters. Fairly long print…
- Downloads
- 27
- Likes
- 20
- Rating
- 0
P
PrintablesDante
NC State Tuffy Sculpture
NC State Tuffy Mascot bust sculpture. The basic model was AI generated. Lots of manual corrections and color additions. Printed at 350mm on a 5 head XL. Set up for white on 2, black on 3, silver on 4 and red on 5. Long print and requires…
- Downloads
- 25
- Likes
- 3
- Rating
- 5
P
PrintablesDante
UNC Mascot Re-Imagined
The UNC mascot Ramses re-imagined. Printed on the XL with 5 colors. 10% adaptive cubic. Obviously supports are a must.
- Downloads
- 24
- Likes
- 4
- Rating
- 5
P
PrintablesDante
Christmas Wreath - Faux Christmas Wreath
Christmas Wreath - Faux stained glass printed in translucent PETG to replicate the look and feel of stained glass without the cost. All solid layers to avoid the infill as the material is translucent. This is scaled for the XL but can be…
- Downloads
- 23
- Likes
- 6
- Rating
- 0
P
PrintablesDante
Cancer Survivor Ornament
Cancer survivor ornament. It was made for an MMU or any color change system. I printed this with a 0.4 nozzle @ 0.2 layer height, but it would be better with a 0.25 nozzle. I just do not have one. I added a 3mf with and without the name.
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
PrintablesDante
Embroidery Large Bobbin Spool Holder
Holder for 4 large bobbin spools for embroidery machine. Have to keep the wife happy. Printed on the CoreOne in PLA. 15% infill.
- Downloads
- 21
- Likes
- 7
- Rating
- 0
P
PrintablesDante
Wallflower Adaptor
The threaded insert broke out of my wife's favorite Wallflower heated air freshener. I designed this threaded insert to attach to the bottle and clip in place on the Wallflower body. 26 minute print using PETG
- Downloads
- 18
- Likes
- 5
- Rating
- 0
P
PrintablesDante
LinkedIn Jail
A little late for Christmas, but here is a remix of the Facebook jail for LInkedIn. There appears to be more and more people getting thrown in that jail now.
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesDante
Cute Dragon
Trying my hand at some AI generated modeling and this model popped out. I have not printed this yet, but it will need some supports for the wings. Would probably work well on a resin printer but is doable on FDM.
- Downloads
- 15
- Likes
- 2
- Rating
- 5
P
PrintablesDante
Santa Claus Following Bust
This model is a bust of Santa Claus that is has an illusion that appears to watch you as you move around. The base has a built in cavity where a 5v strip light can be added to enhance the effect. Printing was done on a 5H XL but you only…
- Downloads
- 9
- Likes
- 3
- Rating
- 0
P
PrintablesDante
EGO 15" String Timmer Mount
EGO 15" string trimmer mount and includes a clip to hang the package for replacement string. This is for the original string trimmer and doesn't really fit right for the newer versions of the string trimmer. They will work, but the…
- Downloads
- 9
- Likes
- 3
- Rating
- 0
P
PrintablesDante
Hurts Jordan Logo
To be combined with the Philadelphia Love Sign as seen in the picture. Can be scaled as required.
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesDante
Cook Top Knobs - GE Cafe
My wife melted and broke the knobs that came with the GE Cafe. They are plastic with a cast aluminum frame and cost about $75 to replace. I made these from polycarbonate and they cost about $3 to make. They can still melt if you put a pan…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesDante
Wine Pour Balancer System
A wine balancing system for those people that love to give uneven pours. Avoids that selfish pour. It works. Probably not as well as would have liked, but it works. Need to play a little on the infill to get the balance perfect. I used…
- Downloads
- 7
- Likes
- 5
- Rating
- 0
P
PrintablesDante
Glencairn Serving Tray
Serving tray to hold 12 Glencairn glasses. The width is just about 350mm and each space is 50mm for the glasses. The handles do not need support. The bridge will get a little stringy, but a little torch or heat gun will clean that up.…
- Downloads
- 6
- Likes
- 2
- Rating
- 0
P
PrintablesDante
Friendship Elephant
Wife request of a friendship elephant. Very simple and short print. PLA, PETG or whatever. Can be done on a mini.
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesDante
Nonwoven Unwinder Splice Bar
This is a pretty specific application on specific application so it will not be widely useful. I needed a splice bar for a nonwoven unwinder. The piece needed to be flexible on the surface but still stiff enough to withstand the loading.…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
These are all currently available results.