Counting matching models…
I printed out a tool box: https://www.prusaprinters.org/prints/39729-tool-box-parametric It didn't have a handle so I made one. Instead of a 30mm screw for the latch, use a 35mm screw, and use the excess length to hold in the handle. 35mm…
Take off the useless sunvisor, use this to fill the hole! Uses the factory screws. 1990 - 2005 Miata / MX-5 Print it in PETG, ABS, or ASA. Do not use PLA for this, especially in warm climates. Enjoy! Check out my webstore:…
Update! Added a new model that adds a lip to the lower piece to add just a bit of drag to the spool so that it does not unwind too freely. This is a lazy susan, or a rotating table to let the filament spool turn freely. Hanging the spool…
Simple limiting strap mounts for the front and rear axles on the SCX24. Front axle is for axles upgraded to an ES08MA II steering servo with one of the typical kits. I printed in PETG for the toughness. ABS would also be an excellent…
Ridgid, Erbauer, JCB, AEG, Keter, Magnusson modular pro tool boxes ridgid pro gear case bin lid. Not compatible for use in the clear top organizer. Works best if you take the inner lining out of the lid on the 22inch tool box from system…
UPDATE!!! I've added a new version which, when printed in TPU/FLEX material, allows you to pull the cord off without unwrapping it! Print the V3 version in flex, and the crate accessory lock in PETG! Cord Wrap for Ridgid Pro Gear system…
simple cord wrap for the side of ridgid progear system 2.0 tool boxes, medium and large. May work on others as well.
Mounts to the sides of the Ridgid pro gear modular large tool box. Presses in nicely for a firm fit or can also be screwed in. Just a basic starting point so that people can remix and design their own accessories for it. At least 2…
I wanted to build a version of the tremor that had more clearance for shocks to be vertical without binding, and @Depep1 was kind enough to include the fusion files in his original. 2/29/2024 update - Added Step file as well as solidworks…
Print these in black PETG with 5 perimeters. For the logo and shift pattern plates, do a color change after the 2nd layer. The holes will need to be tapped afterwards. There are intentional voids within the part, but they force perimeters…
Print without supports on it's side. Stays firmly in place. Must be printed in ABS or ASA, PLA or PETG will not withstand the temperatures required. Print with enough perimeters that it is solid. Specifically designed to snap in place and…
washer fluid cap. Snaps on and stays tighter than the OEM one. Print it in ABS with the design down. Print without supports and with 4-5 perimeters. If you'd like to make a donation to say thanks for providing this model, there's a link…
Simple drop in cup holder adaptor for large Stanley mugs to fit into the cup holder of a 2001-2007 Toyota Sequoia without falling over. Print in TPU for best results but PETG or ABS will also work.
This is a strap wrench that uses GT2 6mm wide timing belt for the strap. Its very flexible and works well for smaller things and can bite very strong because of the teeth. Useful for twisting small things when you don't want to mar the…
This is a few versions of soft jaws for a 6" vice. Mine is harbor freight, but I've tried it on several friends 6" vices of other brands and it still fits well. If it doesnt, simply scale the dimensions in X and Y to fit in the slicer.…
Just a simple clip on spool holder for a wire rack. Secure to the rack using zip ties for best results. I built it to organize shrink tube, abrasive sleeve, and wire on a rolling rack for my technicians, but it can also be used to…
These are simple handles for the rugged box parametric. These handles are intended to be used with 35mm screws. You will still need to 30mm screws to attach the clasps. I suggest an assortment like this one: M3 Screw assortment Solidworks…
soda or spray can holder for ridgid modular crate. perfectly fits in the slots on the front or side. Print in TPU/FLEX. Print the pins in a tough bit rigid filament like PETG or ABS.
I wanted to print the Moon Globe model, but it was designed around an expensive lamp cord set with 3 lamp cords. I bought a cheaper single cord set on amazon, but it only came with 1 nut, when you need two for the moon globe stand.…
a small strap wrench used to hold things of various sizes and shapes. Super useful for grabbing things that are otherwise hard to hold onto.
Holder for standard scalpel handle. Print in PETG for best results. Snap fit, print without supports with tab against build plate. Fits with most scalpel blades including #10 and #11. Perfect for safely storing a scalpel in a tool roll.…
required M5 brass inserts x2 and m3 brass insert x1. Remove an empty switch blank, and replace with this mount for a ram style mount for a very sturdy, 100% reversible phone mounting solution better than anything else out there. Message…
print them upside down in PETG with enough perimeters that the stem is sold. They will not need to be tapped, they will be perfectly fine to self thread while installing. If you decide to print these, please consider making a donation for…
This is a hook to hang the cables from your welder under your fixture table. Coil your cables and hang them out of the way. Intended for a 16mm or 5/8" mounting hole. Print in PETG for best results. Use 3 perimeters and 25% infill. use a…
A hook for hanging tools or cables from a langmuir arcflat fixture table. Just use a #6 wood or drywall screw. I printed in ABS but i really think almost any material would work for this besides a really soft TPU. Bolts in one place only…
If you assemble Cables and Harnesses for a living, this is a handy and useful little tool. It replaces the normal jaws on a cheap steel 1" vice I bought on amazon and works excellently. The vice is similar to a palmer 1" machinists vice…
These are all currently available results.
