Counting matching models…
The canopy is modified to be directly usable with the BetaFPV Meteor 75 Pro O4 hardware, i.e. the surfaces were flattened to account for the screw heads, and the antenna holder was altered to fit the fat O4 Lite antenna. Print in TPU or…
This is a makeup (or other stuff) organizer with several 30x30mm compartments with different heights. Two compartments are subdivided in a 2x2 fashion, and two larger spaces are in the front. Total size 240 x 150 x 75. The larger file has…
Remix of Spongebob's house as planter pot without the drain hole. The length unit is still inches, so scale it up accordingly. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 200 Infill: 10…
Mathematical! Can be printed without infill since TPMS structures are generally self-supporting. I used two walls and two top/bottom layers and it came out great. Just print it slowly for the best results, especially the first layer for…
It's a topographic map created with Google Earth and Touchterrain. The heights are exaggerated to make them stand out more. You can print with 0.2mm layer lines without bottom layers to save on time. Print Settings Printer Brand: Anycubic…
It's a simple plate that can be joined with a snap fit. If required, just print it with some 10-15% straight infill without any top and bottom layers for easy watering and breathing. The original model has an outer diameter of 330mm and…
I made this hay rack since the ones found in stores were either rather expensive or not the right size. This rack fits a decent amount of hay as well as two dwarf bunnies in the tray below. The parts have a large footprint. If some…
It's a topographic map created with Google Earth and Touchterrain. The heights are exaggerated to make them stand out more. You can print with 0.2mm layer lines without bottom layers to save on time. Print Settings Printer Brand: Anycubic…
It's a bowl. I liked most aspects of the original design but wondered why this ridge was present, therefore I made my own and used any ideas I found useful. Mine uses much less filament (about 160g with PETG versus 270g) and prints much…
A diamond TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Office
A full Lidinoid TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Infill: 20 Filament: / PLA Category: Containers
A gyroid TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Infill: 20 Filament: / PLA Category: Office
A full Schwarz TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Filament: / PLA Category: Office
A walled diamond TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Filament: / PLA Category: Office
A walled Lidinoid TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Filament: / PLA Category: Office
A full SplitP TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Filament: / PLA Category: Office
A walled Schwarz TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Filament: / PLA Category: Office
A walled Neovius TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Filament: / PLA Category: Office
These are all currently available results.
