Counting matching models…
Just a simple wall hook for you to hang things from. Did a load study with 25 lbs or 11.3 kg on the single point you see in the image. The holes are 4mm for basic screws that go into dry wall anchors. I'd advise to use good dry wall…
This is a case I made to house the Arduino Uno R3, 1602 LCD (with i2C) and a max6675 module. Update: Revised case deign, never tested it before (no idea why, don't ask). Added a spacer if you are using dupont connectors and don't want to…
Just a plug I needed for my res on my test bench. EDIT: was reminded about an o-ring groove by cheapskate on bit-tech.net forums. Added that. And this is the o-ring I modeled the groove for, as it was the closest I found on their site to…
Just a funnel I modeled in fusion360 to use with my test bench. EDIT: was reminded about an o-ring groove by cheapskate on bit-tech.net forums. Added that. And this is the o-ring I modeled the groove for, as it was the closest I found on…
Just a simple 120mm fan grill. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 15 Filament: Esun PLA+ yellow Category: Computer
Just simple power distribution using XT-60 connectors and two copper bars. Leads should be fused with appropriate values. As well as the input lead, which can be plugged into one of the six connectors. Several versions of the case parts.…
40mm NATO to 1 Inch hose adapter. Just a simple adapter from a thread to hose. Category: Parts
Needed/wanted protective rails for my 891. I couldn't figure out how to split the stls I found on here and elsewhere, so I designed my own. This version is the third revision. Uses three M2 brass inserts for threads and three M2x10 screws…
Modeled this after seeing these things countless times. When I'm better at modeling, I'll update this model so less painting will be needed. Also, try printing without supports, and with. I didn't have much luck with supports. Category:…
Made this 120mm case fan adapter for the Arctic Alpine 12 passive heatsink. Both versions are here, the 115x and AM4. M3 screws can be used to attach the adapter to the heatsink with rubber bands or wire? Category: Computer
Wanted a case for my Raspberry Pi 4b but didn't want to use any designs on here. So I made my own. I don't use the GPIO in anything yet, so there isn't a hole for it as you can see. And to take the SD card out, just remove the pi from the…
The Perrin Sequence. Now in physical form! Couldn't have the symbol/emblem like in game. So the small pieces were one way I thought of that would allow me to have this as one single model. You will however have to rotate this. Print…
So, I thought of this because of this tweet: https://twitter.com/DempMcgee/status/1241347461307867136?s=20 It inspired me to create a larger version that is 6x4 inches on the inside of the box (which is also a forced air system.) This…
Hello, I made this blank bracket after making several other brackets for the Open Benchtable. This can be modified in your stl modifying software of choice. You should be able to use the included screw to attach this to the OBT. I got the…
This is a bracket to attach the resivor from the MasterLiquid Maker 240 kit from Cooler Master. You can use M6 screws and nuts to attach the bracket included in the kit to the main bracket. To attach the part included in this thing, you…
This is a bracket to attach a digital voltmeter to the OBT. It uses one of the included fan/AIO brackets; you should be able to use the included screws to attach it to the OBT. The voltmeter should fit in via friction. I got the OBT…
I couldn't find something that would hold my colorFabb 2.2kg roll of filament in a way I liked. After an inital prototype, this one came out. You need four 625 bearings, four M5 Screws, and 1/2 inch or 12.7mm rod/dowel for this. Source…
Hi there! I designed this bracket for the Open Benchtable. This bracket holds 4 small voltage meters. It is held on by one of the fan/AIO brackets and is braced on the back. I did include screw holes for the dmm screws if you so choose to…
I made this bracket along others for the Open Benchtable. This bracket can hold a 16mm button, 22mm button, and 3mm LED. It attaches to the OBT via the included screws, which you should be able to use. I got the OBT source files from…
These are all currently available results.
