19 models
Prints easy without support. I recommend to print the wallmount and hook as oriented in the .stl with no infill and 4 to 5 perimeter, because that way you get the most stable print. The amount of books you can hold with this wallmount is…
The models print easy. I recomend to print with more perimeters instead of infill for better stability. Because the models are quiet detailed they work best with finer cookie dough. If the dough is too sticky, the models are designed the…
Easy printable. I recomend to print with more perimeters instead of infill. Because of the details it will work better with finer dough. If the doug is too sticky, the model is designed to let you loose it with a stick oder toothpick.…
The models print easy. I recomend to print with more perimeters instead of infill for better stability. Because the models are quiet detailed they work best with finer cookie dough. If the dough is too sticky, the models are designed the…
As it seems that everyone is hyped, I wanted to make a logo plate from the logo. The logo is splited in multiple parts so you can print it without any multimaterial device or tool changer For the fridge magnet i use 20 x 10 x 2 mm magnets…
The parts can be printed with standart settings as oriented. No supports needed. I used these magnets (any 6x3 mm will do): Wukong Neodym Magnete,105 Stücke Ultra-Starke Supermagnete 6 x 3 mm Mini Magnete für Whiteboard, Magnettafel,…
Simple coaster with logo. The gaps are 0,15 mm so they should fit with a good tuned printer. You can print the parts with 0,1 to 0,2 mm layerheight. The inlay parts should be printet without brim and glued into the coaster with superglue…
As it seems that everyone is hyped, I wanted to make a logo plate from the logo. The logo is splited in multiple parts so you can print it without any multimaterial device or tool changer For the fridge magnet i use 20 x 10 x 2 mm magnets…
You can print in dual colour with a single extruder by adding a colourchange in your slicer at the desired height. Happy printing!
I was inspired by Matt Stultz background at the prusa live videocasts. Each tile will use a little less than 1 meter of filament. There are different tiles so you can get a clean outline or straighten the outer lines of your mosaic. You…
I recomend to print the buttons with 0,1mm layer to get a good filament change at the needed height. Happy printing!
I wanted to try and coat the downside of a phone holder with some latex to prevent it from sliding around on the table. So i thought the best way would be to just dipp it instead of painting it. I couldnt find anything near to what i need…
I recomend to print the buttons with 0,1mm layer to get a good filament change at the needed height. Happy printing!
There is not that much to say. Just print the parts in the stated order and put them on the wall or door. The decoration will be app. 530 x 740 mm if you print it at 100% scale. The parts should fit together easy. I mount them with…
Daughter needed a magicwand for her fairy costume :-)
I wanted to show some of the essential steps of the history of Prusa Research and some of the milestones in the world of 3D-Printing. As i only have a prusa mini and no mmu, i designed the coasters to be printed as single parts. You just…
Easy to print cookie cutters. I recomend to print with more perimeters instead of infill for more stability. Happy Printing!
You can print in dual colour with a single extruder by adding a colourchange in your slicer at the desired height. Happy printing!
I recomend to print the buttons with 0,1mm layer to get a good filament change at the needed height. Happy printing!
These are all currently available results.
