Counting matching models…
These models will allow you to display Funko POPs , Funko Sodas, as well as Cards that are placed in Top loaders. The Hex Big Shelf will support a Standard 4" Funko POP that are also in Funko Protectors. The Hex Small Shelf will support a…
This is a 3pc sign that can be placed on a self or desk. Printing this in 3pcs eliminates the need for supports which makes it a very quick print. I used super glue to make sure the logo and the frame stayed together. I printed everything…
I made this Funko Soda display to fit snug inside of a standard POP protector. I used double sided tape to secure the Soda figure to the base. The coin fits in the slot. I printed this with PLA and 15% infill
This is a display stand for a Sports Card/Pokémon/Etc ETC that is in a Standard Top Loader. I revised my original design to have a rounded edge around the top. I printed mine with PLA at 20% Infill
I needed a Box that would fit Trading cards that are in standard top loaders, but would also allow me to flip through them as needed. Its pretty basic, I used Standard PLA at 20% Infill.
I know nothing about Fishing or TikTok but ill take my coworkers word for it. I guess if you know what it is then it will make sense to you. I created two versions of this mold. The Base of the mold can be printed for 1 or 4pcs The top of…
I made this Sign/Light for a family member. I used a LED Cobb light strip for the inside of the light. I used Orange, Blue, and White PLA for the colors. You will need to do a Color change for the Diffuser and for the Top Logo The Main…
I really wanted some sort of design to further customize my Printer Enclosure. What I created was multiple “DRIP” patterns that I broke into 5" sections, roughly .125" thick. I made some with a ledge on the top that could be used for…
I needed a Hose reducer but couldn't find the correct size, so i made this one. This Reducer is 5" in length I printed this at 100% infill with No Supports
I needed a Vertical laptop holder that would hold a thicker laptop. My ZBook is roughly 1.25" or 31.75mm thick. These holders fit perfectly. You will need to print two. I used PLA with a 40% Infill to give it some strength
3.125" OD to 2.875" OD Pipe Reducer with .25" Thick walls Printed with 100% Infill for strength
The coins go on top and can be removed via a 2" (50.8mm) threaded cap on the back. As of now I have not printed this model. I would say you would want supports on the turbo. The model can be scaled to whatever size is needed. The STL has…
This Slab holder is for The Phoenix Grading Company. I am unfamiliar with the company and could not find any stands to accommodate the odd size of one of these slabs. I used 20% infill with Silk PLA
This sanding block is used for sanding the edge of parts to create a Round Over profile. The radius on this round over is .156 UPDATE : ADDED A MODEL WITH .5" RADIUS I used regular PLA at 15% Infill Supports will be needed to support the…
I used PLA with 75% Diamond Infill and No Supports. Seems to be plenty strong for Dust Collection purposes.
This is a concept for a BMW piggy bank. The logo is on both sides which sits on top of a spring attached to the Base. The coins can be placed inside from the top. I have not had a chance to print this one just yet, it will need supports…
This NYJ Lamp is far from perfect. I quickly put this together for a coworker. This can defiantly be improved I'm sure. I printed everything in Regular PLA @ 20% with .22 layers The Base and NY Shell will need supports. I ran a LED strip…
After a simple Washer install turned into a four hour clean up due to a little “Mishap” with the water not being properly shut off, and it was at this moment [Unfortunately for me], I discovered my wife actually didn't know what Knob to…
Just a couple of quick stencils i made for my son's Tech Deck skate park. DGK Stencil I free handed the star in the middle of the “D”. I figured it would be easier for me instead of fighting the bed to hold it down. The Revive stencils I…
A simple LH and RH sawblade guard for a Chop saw or small table saw. The overall dimensions are .875" x 5.625" or 22.225mm x 142.875mm. It is about .156" thick. I tried to print it as solid as i could with Basic PLA. It seemed to work for…
Just a holder for my Pittsburgh brand Dial Indicator. This was made to mount on the side of my enclosure. I ran this with Regular PLA @ 20% infill
These are all currently available results.
