Counting matching models…
Dec 17, 2022 Please read the entire description before downloading! This is a pillbox with 7 compartments for the whole week. Approximately 20mm x 20mm x 136mm in size. For the hinge I use a piece of filament with ø1,75mm that is about…
March 05, 2021 This is a stackable box with drawers for SD and micro SD cards, optional with a USB stick holder as top plate. You can stack together as many drawer modules as needed to create the complete box.…
Please read the description to the end before downloading! This is a remix and redesign of the "Wrapping Paper Cutter, utility knife 2.0!", https://www.thingiverse.com/thing:5158937. I have a pack of 70mm long carpet knife blades, and I…
This is a remix of my own sieve for the downpipe of the rain gutter: https://www.printables.com/de/model/578245-gutter-sieve-leave-catcher-d78mm-regenrinnensieb It fits a gutter with an inside width of about 120mm (130 or 140mm should…
Das ist ein Redesign des Fachwerkhauses von Zemizz https://www.thingiverse.com/thing:4314607 Vielen Dank dafür! Ich habe es anders aufgebaut und auch Kleinigkeiten verändert (z.B. die Position des Kamins) Gedruckt habe ich es in PLA mit…
May 10, 2021 This is a remix/redesign of https://www.thingiverse.com/thing:4833955 The threads didn't fit perfectly, and the wall thickness of the part with the external thread was too weak, so a few broke shortly after screwing them…
This is a simple cover for the y end stop of my Ender 3. I don't know if it fits to other ender models or any other brand. For fastening, 3 of the screws of the stepper motor must be replaced by M3x10 screws.…
December 23, 2022 This is a remix of my own pilldispenser https://www.thingiverse.com/thing:5720588 The basic part is the same as the original pill box, without modification. I redesigned the lids to print with transparent PLA.…
The 1:12 scale model of my real-life desk with chair. The matching roller shutter cabinet is available here: https://www.printables.com/model/1261534-dolls-house-shutter-cabinet-puppenhaus-rollschrank Das Modell meines real existierenden…
This is a remix from Lyrylin's "Coffee tank extension" on Cults3d https://cults3d.com/en/3d-model/home/bean-tray-extend-for-magnifica-s and the newer version on Thingiverse https://www.thingiverse.com/thing:4941157 I used the SolidWorks…
Apr 02, 2022 This is a kazoo in 3 sizes (100mm, 120mm, 140mm). They differ mainly in volume. The kazoo diaphragm can be bought here, for example:…
Das ist ein Modell der alten Schule "Ahl Schull" in Heddesdorf (Stadtteil von Neuwied) im Format H0 (1:87). Ich bin auf der Suche nach 3D-Modellen von Fachwerkhäusern auf die Papierschnittbögen von Jürgen Moritz auf der Seite…
This is a case for the mobile phone "OPPO A74" I printed it out of TPU95, density 40% I used my mobile phone model (see grabcad) for the construction. Das ist eine Hülle für das Handy "OPPO A74" Ich habe es gedruckt aus TPU95, Dichte 40%…
Drum Stick Controller For me, this is above all a help in not losing the drumstick. It's very helpful if, like me, you have one or more handicapped fingers and can't grip it firmly enough, You can also swirl the drumstick around -…
Das ist ein Remix/Redesign des Flaschenhalters https://www.thingiverse.com/thing:5617983 . Es gibt 2 Ausführungen: Flaschenhalter zum Schrauben, für Fahrräder mit Befestigungsschrauben für Flaschenhalter mit Abstand 64mm, s. Fotos.…
This is a simple dust cap for a French bicycle valve. Depending on the printer or slicer, the inner diameter may need to be adjusted slightly. Either by X/Y scaling in the slicer or by adjusting the "horizontal expansion", e.g. with Cura.…
Sep 02, 2021 This is a mounting plate / wall bracket for the Fritzbox 7360, 7430 and identical models with a mounting hole spacing of ~178mm. After fixing the mounting plate to the wall, the Fritzbox can simply be hooked in. The side…
Please look at the newer version: https://www.printables.com/de/model/859040-gutter-sieve-leave-catcher-d78mm-version-3 This is a simple Gutter sieve / Leaf catcher for my gutter downpipe. It fits a gutter with an inside width of about…
December 29, 2022 This is another new version or remix of my glasses case https://www.thingiverse.com/thing:5430254 I have simplified the design, the lock is less complicated, the hinge has been moved to the inside, so the whole thing…
This is a simple Shopping cart chip chip with a skull on it. I'm changing the color at layer 8. You may find it on OnShape: https://cad.onshape.com/documents/40ddd719bef8c3e7b0ecabb5/w/3ad76ed959cb2523bae34e2c/e/489ed93d6ce40fc901b8f0d1…
August 13, 2021 This is a plug-in mini shelf that you can combine as you like. I use it for my printed Benchy variants. With the console parts you can hang it at the wall, the panels can be used to get a smooth top without rails. Sept.…
This is another new version of my glasses case. See also the previous model https://www.thingiverse.com/thing:5751006 . I noticed that the previous model kept tipping over when you opened the lid. I was also in the mood for a new design.…
I designed a small submarine based on the 3D-Benchy. I know there are already several, but the existing ones were too big, too long, too something for me. The hull is not round but oval. With this and 60% filling, it lies deep enough in…
Ich musste bei meinen Fliegengittern die Netze austauschen, die waren nach ein paar Jahren Gebrauch löchrig und unansehnlich geworden. Beim ersten Fliegengitter bin ich fast verzweifelt, der Keder ist da immer wieder raus gerutscht, den…
This is a redesign of my own plug-in mini-shelf Pluggable mini shelf von Findusdwarf | Kostenloses STL-Modell herunterladen | Printables.com ---- This is a plug-in mini shelf that you can mix and match as you like. I use it for my printed…
Replaced by the new Key Fob Collection: https://www.printables.com/de/model/427591-key-fob-collection-schlusselanhanger-sammlung ------------------------------------------------------- Apr 16, 2021 This is a simple key fob with the text…
I've found the vertical photo frame by emrekoch on thingiverse and redesigned it to my horizontal photo frame for 10x15cm photos.
This is a small collection of simple shopping cart coins, the size is that of a 1-euro piece. Printed with a layer height of 0,2 mm, I'm changing the filament on layer 8 to get a second color. February 4th, 2026: Added two new chips:…
https://youtu.be/prxj5KZd2pQ These are connectors for connecting servo plugs to Dupont cables, see video and images.
Das ist ein Remix des Leuchtturms von uwezi. Ich habe das Modell auf H0 skaliert und in Einzelteile zerlegt, so dass man die Teile in verschieden Farben drucken und zusammen kleben kann. ---- 21.08.2025 Mein erster Druck des Leuchtturms…
I lost the cap of my glue tube, so I had to print a new one - quick designed, quick printed. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2mm Infill: 80% Filament: doesn't matter PETG or…
Jul 12, 2022 This is a remix of my own design "Glass Cases", https://www.thingiverse.com/thing:5330988 . My own glasses case once fell on the tiled floor and broke a hinge. The latch was also not permanently durable. That's why I changed…
Replaced by the new Key Fob Collection: https://www.printables.com/de/model/427591-key-fob-collection-schlusselanhanger-sammlung ------------------------------------------------------- Apr 16, 2021 This is a simple key fob with the text…
Apr 16, 2021 This is a simple key fob with the text "MICRA". I have uploaded the the part as stl, parasolid and step so you should be able to modify it. If not, it's simple to redesign it. I have paused it at layer 5 or 6 and changed the…
This is a 1:12 scale model of my real existing shutter cabinet. Designed as a double cabinet (like the real one) or as a single cabinet. The matching desk can be found here:…
Jan 30, 2022 Boyscout neckerchief slide with logo of german scouts "Bund der Pfadfinderinnen und Pfadfinder" https://www.pfadfinden.de/ OnShape-Link:…
Replaced by the new Key Fob Collection: https://www.printables.com/de/model/427591-key-fob-collection-schlusselanhanger-sammlung ------------------------------------------------------- Jan. 25, 2019 This is a simple key fob with the…
This is a collection of simple key fobs with text. With a OnShape account you can also get them from here:…
This is a redesign of my own stand for my S6 Lite tablet (and others): https://www.printables.com/de/model/352882-tablet-stand-s6-lite-and-others This Version is more stable than the previous. I screwed rubber feet onto the 4 holes on the…
May 05, 2021 This is a remix or redesign of the https://www.thingiverse.com/thing:3700643 "Creality Ender Station (LCD + Raspberry Pi)" I have added a side console for a power switch and a status LED for the Raspberry and moved the base…
April 30, 2018 This is a kazoo holder to be put into a usual harmonica neck holder. I've printed it with my cheap wooden Geeetech Prusa printer. Additional needed parts: harmonica neck holder to combine top part and bottom part: 2 screws…
May 09, 2019 I had to put an SD card in a ring binder. First I taped it to a piece of paper - but that was bad, just ugly. That's why I thought about using this SD card holder to quickly, easily and securely place an SD card in a ring…
Key fob with the logo of the german scouts " Bund der Pfadfinderinnen und Pfadfinder " https://www.pfadfinden.de/ Simply glue it toghether
Das ist ein Ständer oder eine Wandhalterung für das das Thing : "Handgriff für Bohrfutter oder Bithalter 1/4", 6,35 mm nach DIN 3126" von netwalk: https://www.thingiverse.com/thing:6056046 Wem die anghängten Formate nicht reichen, der…
December 02, 2020 A simple divider for the door shelfs of my Liebherr refrigerator. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 25% Filament: PLA White Notes: I…
Jan 30, 2022 Magnetic button with the logo of the german scouts "Bund der Pfadfinderinnen und Pfadfinder" https://www.pfadfinden.de/ To complete it you need a little magnet, 15mm diameter and 3mm thick. e.g. this:…
August 25, 2019 Not a lot to say: A simple part to tidy up the meter rule Category: Parts
Apr 19, 2021 This is a stand for my Pi2Go from 4tronix. Pi2Go is a little raspberry pi roboter to understand an learn robotics and programming. Print Settings Supports: No Resolution: 0,2mm Infill: 40% Filament: PLA
This is a case for a voltage converter ‘ARCELI DC-DC Buck Converter Voltage Regulator Power Supply Module, 3.0-40 V to 1.5-35 V’ with the LM2596 chip, which is available here on Amazon, for example: ARCELI DC-DC Voltage Converter I got…
These are all currently available results.
