Counting matching models…
A simple model of a 3D Star of David. Used it as part of another model, but was asked about it, so I'm sharing it here. Designed in OpenSCAD, can contact me regarding customizations.
Since the standard spool holder in the Singer Heavy Duty is way too small for my threads, I designed a larger one. It's 11 mm in diameter and 65 mm long. It was tested with 4432 and 5523, it should probably fit Bernina as well. Print with…
Needs support for print, additional screw (from the spares bag) and a normal nut is needed, on top on the design it's based on. The model in Tinkercad: https://www.tinkercad.com/things/jr888EBxI6w
A mount for eSun eBox filament box, works with the Prusa dry box design as well. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20-80 Filament: Filamentech PETG Blue Notes: I set the…
It was made to be added to a sign, but it can be used as a basis for a necklace pendant or earrings.
Kind of a basic pendant to combine the Polyamory symbol and the Transgender symbol. 2 versions - one with a pendant ring, and one without. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill:…
A lower version of the original mount design, to work with: https://www.printables.com/model/74324-e3d-v6-hotend-fan-duct-prusa-mini-x-carriage-repla I also use this:…
I got a 3 wire fan, but it's smaller than the original fan, so I extracted it from the step file, and shortened it. I printed it with snug supports, on the side that attaches to the hotend.
I'm using a pitstop extruder and wanted to connect the eBox tube to my extruder, but it didn't fit with the original thing, so I resized the hole to 6.2 mm and now it fits perfectly. Category: 3D Printer Accessories
Printed it with PETG with 15% infill, no supports, thin side towards the front.
Made for: https://www.thingiverse.com/thing:4605309 I would recommend printing in ASA/ABS to withstand the heat in the car if you plan to leave it there, I wouldn't recommend PLA since it is too brittle for the flex needed to open and…
I have taken the original mount and added 3 cogged wheels to allow for adjustment of the horizontal angle. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Generic PLA Silver…
Recommend to use a color switch to make the symbols and added text more visible, I used a glow in the dark filament for the base. The real picture is blurred to remove the names.
The end cap with a clip to attach it to the cable when the cable is in use. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% Filament: Filamentech PETG Blue Category:…
Took a bobbin model to use as a spool for my serger, so scaled it up, my Singer 4423 is still able to wind it with the bobbin winder (not very evenly, but acceptable). Prints normally without supports or rafts, I printed from PETG, but I…
I used supports to print it, not sure if they are needed. Printed it with PETG mainly because it was loaded in my printer.
Allows you to print while the lid is open, chamfered end towards the print head, PLA is enough. Also allows to print on larger labels (after cutting some plastic so P-touch tapes will work), naturally not to print on the entire width, but…
A stand for a phone running octo4a, personally I connected it to a wireless charging arm by Artos, but it should work for other phone arms. I printed it with a 70% infill in the bottom, to wheigh it down a bit, in PETG, with detect…
These are all currently available results.
