Counting matching models…
I use this mostly for cleaning TPU from my textured bed. Probing causes small dots on bed that don't come off easily with plastic blade. This is a easier way to clean without potentially damaging your bed surface.
Used for covering up the lower dish in the 2014-2019 Sierra center console Printed with TPU, 15% gyroid infill, 3 perimeter walls
I designed this for my friend as a show piece for his action figures. The photos supplied are his showing off how the figures look with it. He also found the sticker kit on etsy:…
This is part of my set up for LONG distance. I wanted to have a more comfortable configuration when sitting on the bench. Due to having a large amount of elevation correction in my rings and rail and large objective lens I needed to have…
This was designed for the DWS779 saw with a shop vac 1g. The outgoing side has a 32mm diameter with protruding ribs to retain the vacuum tube. I used a small strip of duct tape to make sure it can't detach. Pretty sure it would work fine…
Designed for a friends dragon fruit plant on his desk that was having trouble with gravity.
I used this flooring: https://www.amazon.com/dp/B0C65HXJX3?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1 I was asked to provide drawings with dimensions. I have stencils that can be printed on 11x17 sheets, a dimensioned drawing…
Snap on shim for aligning the Old Town seat to keep the seat out of the way of the dry storage lid. There are different sizes in case the tolerances require different. I used the .35" shim for my AP120 seat. Files are saved with thickness…
Used on a Keurig K-Slim. Both the riser and the lid holder work with a yeti 10oz coffee mug (4 inch vertical). The lid holder and grate holder are just double sticky taped to the coffee maker walls. I made the Lid holder removable so it…
For assembly: use 10-32 x 3/8" - 4X and 10-32 nuts - 2X. I recommend printing with PETG with at least 4 layer walls and 35% infill or more, cubic or gyroid. Special thanks to David Sanchez for letting me use his photo.
This is designed to fit Old Town kayaks that use the universal transducer plate mount. This replaces the plate from Old Town to achieve the angle required for the standard hummingbird mount. Uses 10-32 bolts about 5/8" long.
This is to be used for the typical plug upgrade for the Auto Pilot's motor and battery. https://www.amazon.com/dp/B0BW8HRZR4?psc=1&ref=ppx_yo2ov_dt_b_product_details I printed it with PETG at 100% infill. There are hex slots in back side…
This is intended to be used as a backup/replacement key for the old town auto pilot series. The safety switches use a single magnet switch per safety device. The standard products for the assembly are just 12mm magnets and a flat head 3mm…
For use with standard kayak paddle holder. https://www.amazon.com/gp/product/B0B38NF87H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I printed in TPU with 10% infill with 2 layer wall (1.6mm). Adjust infill and wall thickness for…
Sorry for the bad pics, I will upload better ones later. front 1" risers have a round front for clamping a bar mount on. I use mine for my large minn kota remote and a thru hole for a lanyard. rear risers use PETG (8 perimeter walls and…
These are all currently available results.
