Counting matching models…
Modification of the Original part deleting the silly power plug hole. Just unhook the PSU cable from the fan and route it through the fan hole. You should shorten the cable and reuse the sleeve from the Original fan anyway for safety. I…
This model supports an enlarged screwhead of 10mm and a screw distance of 24mm. I just enlarged the screw holes laterally so it should also fit the original distance of 24.6mm should this in fact be the right one on your scooter. One…
This Model lets you mount a BOBOVR B2 Battery securely to a Pico4 headset similar to what the BOBOVR M2 PRO head strap does. I used broken one of these as a donor so I included the possibility for adding a PCB with pogo pins in the base.…
Update: added the base plate, a final version of the keyboard base and a floppy box model. This is a miniature model of a classic Amstrad PC1640 I made to house an oled screen and a ESP32 micro controller. I started this project to see if…
updated 13.01.2023 - Added a slim even thinner version for maximum feeling including 20% more ribbing Remix of the Pinecil Soldering Iron Handle 24mm version modified with ribbing for my pleasure and a notch to access the screw for…
I made a nice flush-sitting plug for the ethernet port in my Thinkpad X270. It should fit the same for all Thinkpad models with the same case (So all X2x0 Models) and other models with the same 2mm recessed plug. I printed it in TPU…
A simple rechargeable battery storage solution attachable to the underside of a wooden shelf. It has holes for 2 fairly short wood screws for mounting. Stores 30 batteries. The filler model is purely optional/cosmetic and is dropped into…
This is meant as a vibration dampening gasket that goes between an ATX PSU and the PC case. Print with low infill for extra squishiness. Openscad source included. Print Settings Resolution: .2 Infill: .2 Category: Computer
Quick and dirty Adapter I whipped up to adapt 2 cr2032 to an er14250 socket. it has a build in support you need to remove and you need something to make the contacts out of like copper foil or in a pinch aluminum foil. the cr2032 will…
This is a case for a common USBTinyISP clone. I wanted something that was as small as sensibly possible and allows for access to the headers as well as the 5V power jumper. The LEDs had to be visible as well. You need 4 M3 screws of about…
There is a newer version of this thing After trying 2 of the existing cases for the TS-100 soldering iron I was a bit underwhelmed with how bulky they were and how fragile the hinges turned out to be. Also I did not manage to print one in…
After about one and a half years of faithful service my old filament holder thing finally broke due to me overloading it and using it in an orientation it wasn't designed for. (the old holder https://www.thingiverse.com/thing:1427114 ) So…
A tube-shaped alarm-clock based on an earlier design made from a plumbing tube. The Tube integrates a speaker meant to fit in halogen light fixture holes with a diameter of about 80mm. The clock has one big snooze button as well as 3…
update Added a variant that is just an Insert replaceing the cups for fast printing. I use this variant myself now ;) I wanted to print the knuckles grip ( https://www.thingiverse.com/thing:3652161 ) for my oculus touch controllers in…
These are all currently available results.
