Counting matching models…
Build guide: http://danielnoree.com/the-openrc-f1-build-guide/ Questions & Answers: http://danielnoree.com/openrc-questions/ OpenRC Electronics: http://danielnoree.com/openrc-electronics/ Consider supporting me on Patreon:…
After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my own printer. Now, i am not talking about a "print-several-pieces-and-then-assemble" version…
The EMD SW 1500 is a American diesel switcher locomotive made by General Motors' Electro-Motive Division during the 60's and 70's. Some 800 were made and there are several still in serivce in the United States. This 1:32 scale version of…
This is a OpenRC F1 body inspired by the 2017 McLaren livery. It´s meant to be printed using dual extrusion. I have printed it using a BCN3D Sigma. There are two STL´s per part. Color1 and Color2. the color name is consistent and the same…
Before you start printing the OpenRC F1 that uses pockets to fit the small M3 nuts and see if you need to calibrate your printer for them to fit. Even if this comes out good, make sure you test the m3 nuts in the first 3dprinted part…
NOTE: This is a concept model used for testing and a show model. Never ever use these as a replacement for the real thing! If you decide to try them out, be careful and use proper safety gear. Use at own risk. This was a weekend project i…
Simple GoPro mount that´s mounted using a countersunk M3x8 screw in the cockpit mounting hole and a M3 nut in the mount itself. Printed standing and it´s not meant to with stand great forces. You also need a M5 nut for the GoPro "screw".
BMX Grips designed and 3D printed for Swedish BMX legend Tobbe and his BMX Museum: http://www.bmxmuseum.se/
For those that feel the need to get those close up shots while racing their OpenRC F1 car around the neighborhood. It´s meant to be used together with the "GoPro Seat Mount" found here:…
A few years back i traced this one from an old photo for a friend.
A friend needed a new set screw for their drying rack.Designed in Autodesk Fusion 360 and 3DPrinted in ColorFabb nGen on a Replicator 2X.
The base of the vase have the exact profile as the original spur gear. The vases on the pictures are printed on a ZYYX 3D printer with a enlarged nozzle (1.0mm) and the layers are 1.0mm.Print speed kept to a minimum (5.0mm/s) for optimal…
These are all currently available results.
