Counting matching models…
Opel corsa c windscreen washer cap. Printed in Tpu. Approx 1 hr 15 min. Infill 20%. No supports. I added anti warp tabs to print - may or may not be needed. Would not recommend white tpu.
Honda jazz/fit bonnet stay clip - 2016 model Grey version is abs after 5 years use. Printed in abs/petg
Opel corsa c bonnet stay clip. Printed in abs. 20% infill. Print with supports. 37 minute print. To edit the step file. Edit the step file in solid edge. Open as an iso metric part. Go to options - units - length and click the drop down…
Battery cover Esab sentinel A50. Not perfect - just a temporary battery cover for the Esab welding helmet - the tidy up police misplaced mine. Printed in abs with support. 20% infill. 17 minute print.
Tig tungsten grinder. Uses the tig torch collets - not an accurate way to do it but is easy. Thread pitch is ¾-12. Washer fits below collet nut - protects the bearings / bushes. Printed in tpu. Printed in abs - 2.5 hours print. 20%…
Jst SM 3 pin connector bracket. Printed in abs.
Opel corsa c sun visor mount. Spacer 5 minutes. 58 minutes - Printed in Tpu - 20% infill. Support needed. May need a brim.
Vernier caliper holder mount. Printed in Tpu95A. 20% Infill. 55 minutes. Print with support.
Toaster tongs. Printed in abs. 20% infill. 1 hr 15 min print. Idea is to grab the stuck toast with the tongs, near the middle of the tongs - teeth can be used to retrieve broken pieces.
Anderson SB50 front cover. Various covers for Anderson sb50 plugs. Printed in tpu. 20% infill. Tree/Organic supports. Suggest printing with a brim - 8mm width, 20 lines. 45 Minute print.
Resettable fuse box. Design your own fuse box with the cutouts in the step file. It is a good tight fit - if you need more clearance then just do an offset in the step files of 0.05mm Printed in abs/asa/petg/pla Updated the step file -…
Diy version of the pressure pulse sensor. Sensor - Rs components part number - 721-4944 - Murata - Piezoelectric Diaphragms 35mm. O rings were changed to flat seals.
Alligator/Crocodile clip soft jaws. Tpu jaws for alligator clips - soldering helping hands. There is a top and a bottom jaw. You will need to print both and for the other side if needed. I use the fixed jaw on top. Printed in tpu95a with…
Tiguan 2012 - Mophie phone mount. The mophie mount breaks easily - print and then reuse existing parts. Printed in asa/abs with supports. Print on it's side.
Angle grinder 115mm holder/mount. Printed in abs Infill 20% Print with supports 1h30 print Print the spacers only if you need more depth.
Needed a waterproof housing for the Ajax door protect. Two different base plugs - one has a hole right through so not waterproof. Other one the threads only go halfway. Use M6 x1.0mm bolt to remove plug to change batteries.
Holder for a push button - used for hidden immobilizer switches. Printed in abs/petg.
Bonnet stay housing. Alternative location for inserting the bonnet stay when in a restricted height zone - underground parking with pipes etc in the way. Printed in Tpu95a with supports. 20% infill. 43 minute print.
Powerpole connector lock. Printed in asa/abs.
Anderson SB50 handle and strain relief. Changed the white one to the green version. Printed in abs/asa. 20% infill. Tree supports.
Karcher WD6 adapter - for vacuum or blowing. Used for vacuuming on top of doors, edges and cleaning gutters with the blower function. Printed in petg or asa 3.5 hours. 20% infill gyroid. No support.
Fuse holder. Use the faston 205 series terminal - 5.20mm not the 6.35mm. Printed in abs.
Clip to hang up multimeter - I use velcro looped through clip and bonnet. Printed in abs.
Anderson SB50 rear cap. Printed in Tpu. Suggest printing with a brim - width 8mm 20 line count. 20% infill. No supports. In your slicer turn the seam to the outside. Turn off auto hiding. Edit the step file to get the size hole that you…
Designed to use left over filament. Thin and thick versions. Printed in Abs/Petg
Injector connector plug. Connector plug to connect to an injector. Don't know how many injectors will be compatible - quick print to test. Was made for an ev14 injector. Printed in abs/sbs Print with support 20% infill. 22 minute print.…
rPi Pico header soldering aid. Tool to aid soldering headers to a rPi Pico. I prefer using a breadboard to solder headers, but it can be hard to remove afterwards - easy with this tool, no worries about damaging the pcb or headers when…
Opel Corsa C aux air pipe. Printed in Tpu - no supports. 28 Minutes. 2g. The side with the lip goes to the plastic pipe going to the intake manifold, the other side goes to the solenoid - they are different hole sizes. Tested for 6 months…
Cole hersee automatic reset circuit breaker cover. Note 1 pin is normally taller than the other - turn cover so the bump inside fits on the positive terminal - usually the shorter pin. Printed in abs/petg.
Battery charger connector - easy disconnect if one forgets the next morning. Tie the cable to a fixed object. Uses 4x power poles connected to a fuse then the battery. (2x for the charger cable) Uses 2x Anderson retaining roll pins.…
Nitrous activation or immobilizer push button holder. For nitrous you only want activation while being pressed - no latching of relay, on the immobilizer you want the relay to latch after being pressed. Fits into the slot of the gearlever…
Quick connector for multiple batteries. You need the power pole 45A connectors. Uses 4x rs components RS278-534 - M3 Brass Threaded Insert diameter 4mm Depth 4.78mm Wires used - tinned 4mm squared. Wire rated at 32A max. Originally used…
Holder for voltmeter. Top cover cut from clear plastic - old cd rom cover. Uses the mini voltmeter. Printed in abs.
Supports removal, sacrificial pad. To protect my silicone or olfa mats, I use this base. Printed with tpu95a - approx. 45 mins.
Multimeter lead connector plug. Redneck version of test lead pin jacks - I needed a solution now - to order, I would have had to wait 2 weeks. The connector pins are from Deutsch 2 pin DT connector. You can buy the pins separate. You may…
Capacitive touch switch holder for immobilizer touch button. I desolder the pins and solder wires in it's place. Printed in abs/petg.
Biqu H2O pipe clamps to prevent water flowing everywhere when disconnecting pipes to work on extruder. 10 minute print for 2. 2g filament - any filament. Infill 20% No support. If you have a h2o, check your plastic end for cracking -…
Spacer to reduce the size of the hamburger patties for the quarter pounder size hamburger press. Printed in abs.
These are all currently available results.
