Counting matching models…
Miniature Giants Causeway desk model. Print the base in green for grass or blue for sea. Recommended slicer settings Base: In your slicer rotate it to print upright on the long side nearest to rocks, see picture. This will give you the…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
A trippy Himalayan salt lamp. To achieve the effect you see in the picture you need to use the following settings in your slicer with white filament: - 0.2mm layer height - 2 perimeters (if the 0.2mm layer height hasn't set it already). -…
Print approx. €5.41–€6.61 excl. taxPreliminary estimate for one variant
Simple 'White Bear' model from black mirror. Easy and fast to print! Recommended slicer settings: 0.2mm layer height enable 'ironing' to get smooth front/top surface Print in white obvs :P
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
A cool checklist / to do list in which you can insert paper and close the cover to secure! The model is print in place and comes off the bed with moving sliders and hinges. Comes in three variants, normal, one for hanging e.g. on a wall…
If you used this part consider leaving me a small tip using the below links! https://www.buymeacoffee.com/wafflecart https://ko-fi.com/wafflecart Silhouette cameo 5 roller replacement parts. This can be used to replace the parts on the…
9 ¾ train platform sign I designed from Harry Potter Studios / Hogwarts Express Few ways it can be mounted: - Mounted to a wall etc with screws - Can be used with Ikea Skadis - Can embed magnets see the remix to embed magnets . Make a…
A 3D Printed Fan Cover / Mesh Filter. Prints out single straight lines criss crossing. See close up pictures. It is memorising to watch it being printed! Do a colour change on the first and second layers in your slicer to add a shimmering…
Pen pot / pen holder for your desk or home office. Measures 80mm x 80mm x 100mm but can scale down easily. Print pictured is printed at 0.3 layer height. If you like my designs and would like to see more please consider donating/tipping.
Experiment with 3D printed mesh sheet. Requirement: Print at 0.2mm layer height Optional: Do filament swap/color change on second layer in your slicer to get funky colors.
A modular desk caddy / desk organizer / desk storage inpsired by the “1970s HOF desk caddy”. Stylish storage and organization for your office, bedroom or hobby. Designed to require no supports. It includes: - Main cubes with system to…
A fully functional 90s coca-cola yoyo replica. Requires a M3x20mm bolt and nut. The 2 bases (white coloured parts) require VERY minimal support to print the inside. Assembly instructions video: Assembly instructions text: Use the "screw…
Halloween ghost keychain / keyring. Comes in 3 character variations. Great for halloween and trick or treat gifts. Print tips: - Prints in under 15mins! - In PrusaSlicer, BambuSlicer or Cura you can add a color change. Start with black…
Halloween sign that says Caution Zombies. Can be stuck on or screwed to something. Great for a party or to add to your home Halloween decor! For multi color printing set up a filament change in prusaslicer. It should automatically detect…
A simple test coin that has 5 colors and is designed to be a quick 10min print to test PRUSA XL 5 tool head capability. Features it tests: - Tool changing abilities utilising 5 tools. - 5 colors (5 changes in each layer) - Interface /…
Optical illusion coaster than changes pattern at different viewing angles. Watching it print is memorizing!
Add a bit of color to your PlayStation PS5 logo with this quick and simple logo insert accessory. Quick 4 min print! Instructions: - Print in 0.2mm layer height or lower for best results, it is 0.4mm thick. - Print out in your desired…
Cute avocado keychain charm. Snap fits together no glue required. Comes in two sizes small and large. Place black plate in green housing, then insert yellow into green housing. Then insert brown circle. If you like my designs and would…
A 3D TWITCH logo that can be printed in multiple parts and colours then snap fit together. No MMU required. Great for a stream background or desk accessory etc.
Dust bunny keychain charm/keyring from anime My Neighbour Totoro Print black base and then print white eyes. Snap fits together, no glue needed, easy print! If you like my designs and would like to see more please consider…
Asteroid plant pot for your flowers or succulents. Comes in two sizes 70mm and 100mm. No special settings needed for printing, the prints in the pictures are 0.3mm layer height. If you like my designs and would like to see more please…
Rainbow in pride colors. Print each stl in different colour, glue together if needed but it holds together well if just sitting on a desk. Pictures above were printed in 0.3 layer height.
Fancy maze coaster. Watching it print is memorizing! Recommend you use 3 or more perimeters to get a smooth finish with the lines being filled with perimeters rather than infill, see picture in slicer for an example. Pictures printed with…
Funny sign to put up in your workshop, shed, 3d printing room or bedroom with text “0 days since last accident”. Also includes a blank no number version if you need to add your own number or leave it blank and write a number with non…
Oasis logo plaque / 2D wall art. Part of an Album Art Project I'm doing. A lot more bands and albums to come. Requests Welcome! Print stl labeled black in black Print stl labeled white in white Insert white pieces into black base. Should…
A full size hard case/travel case for the teenage engineering op-1 with a replica op-1 layout on the top, includes a side panel to allow access to the headphone and charging ports while in the case and has the option to embed 5mm magnets.…
Cool s/ s thing art piece. There are 2 versions, regular and one with detail. Do a color change in prusaslicer to change top layer. If you like my designs and would like to see more please consider donating/tipping.
A collection of Christmas models that can be used as tree decorations, ornaments or keyrings/keychains. Includes a snowflake, gingerbread man and "xmas so it is!" text. Bonus points if you can name the city this saying is from.…
Halloween spider decorations for hanging or sticking. Easy and quick ~10min print. Choose from - thin or chunky spider - with holes for hanging - no holes if you want to stick to the wall or window etc. Follow me for more halloween themed…
Cute set of 4 dog keyrings that are perfect for keys and gifts. Prints in just 15 minutes! Tips: - Use color / filament change in your slicer software to achieve multi color, no MMU or AMS required. - Like and follow for good luck! Follow…
This is a spooky Halloween Haunted House sign that can be hung with string or stuck to a wall or post etc. A great prop or decoration! It was designed using fusion 360 and mimics real wood. Color change can be used at certain layer…
Model of a fan duct/shroud/intake for the Thermalright AXP120-X67 Low Profile CPU cooler to have it intake no warm air from inside case and instead draw cool air from side. Requires no extra parts to mount by using the holes already in…
SUBWAY SUPREME logo paperweight for hypebeasts to waste their filament on! Comes in two sizes, 15mm and 30mm thickness. Print out each separately in their respective colour and fit together. Print pictured is 0.3mm layer height. If you…
Emergency Father’s Day card. Still work in progress getting the seam correct and easily bendable, in the mean time you can heat the seam on the edge of your printer bed or with warm water before bending. Attribution: used picture from…
Logo plaque from the movie PSYCHO for your desk or wall. I printed with a filament colour change. This can be done easily in prusaslicer and cura. Printed successfully at 70% and above scale :) If you like my designs and would like to see…
DIY - Keychain Jewelry/jewellery Charm. - Print loads of the beads (I do three at a time) - Thread beads through string - Attach to keyring with a slipknot. - Tie knot at other end to secure Two hole sizes available, 3mm and 5mm. If you…
An art piece that uses halftone lines to form an optical illusion of a cat. Dimensions: 160mm x 121mm x 0.6mm Print Tips: - Print at a minimum of 0.2mm or less layer height - Start with white/light color then do a color change last layer…
An art piece that uses halftone lines to form an optical illusion, in this case a goldfish. Comes with two heights on the black lines thin 0.2mm tall and thick 0.6mm tall. Dimensions: 187.4 x 110.5 x 2.2mm (thin) 187.4 x 110.5 x 2.6mm…
A modern knurly spiral planter / vase plant pot for your flowers, plants or succulents. Comes with thick, thin and vase mode models. No supports required. Dimensions: 112.5x112.5x101.4mm Print Tips: - No supports required - For vase mode…
A simple Star Wars logo.. Tip me https://www.buymeacoffee.com/wafflecart https://ko-fi.com/wafflecart Patreon Want to support me and allow me to create more models for 3D printing? Check out my Support Tier on Patreon Want to sell prints…
A modern knurly spiral catch all tray / bowl for your home or office to store keys, mobile phone, AirPods, watch, wallet etc. Comes with thick and vase mode models. No supports required. Dimensions: 150x150x38mm Print Tips: - For vase…
Cute mini trophy with a squircle base. Prints in multiple pieces so it uses no supports and can be printed in multiple colors. Has an optional name plate. Print tips: - Print the top yellow piece upside down so it needs no support and add…
Simple Colorful Plant Pot Labels for pots, plants, vegetables, fruits, herbs, and growing seedlings etc. Comes in various styles and text as well as blank to add your own custom text in prusaslicer. Do a color change in prusaslicer to…
A display for showcasing hueforge prints of album artwork/covers 120mm x 120mm in size, similar to the “Now Playing” album artwork in music players. There are model variations of 2mm and 3mm thickness and also version with stand.…
Multi color cross, print each part separate and fit together. If you like my designs and would like to see more please consider donating/tipping.
Remix of the following model from Bryce Cronin: https://www.printables.com/model/96794-rugged-airtag-key-ring-case Just made it a bit simpler and reduced the size of the holes. Used m3x6mm hex screws. To embed the nuts use the “screw…
typing... Apple iMessage bubble
Funny Halloween sign with text "sup witches" Default size is 170mm x 100mm but can be scaled to your needs Make the text and border a different color by doing a color change, prusaslicer etc should detect it as a logo/sign automatically.…
Christmas tea light accessories to turn a simple tea light into a snowman decoration/ornament with glowing nose. Dimensions: 34mm to 38mm tea light sizes available. Print Tips: - Choose the appropriate size of top for your tea light -…
Simple minimalist modern planter for your plants or succulents. Comes in two sizes 70mm and 100mm. It is made with three parts that can then be glued together. Print the insert part out in your preferred color. Print pictured is printed…
Print this IKEA SVARTARONIA inspired planter in plastic for half the price! Modelled this in fusion 360 in a few minutes and took x10 that creating the thumbnail! Size: 64mm tall, 75mm wide Print time: ~1hr30mins @ 0.2mm layer height…
Killjoy logo from Valorant that snap fits together. Leave a like or comment if you'd like to see more gaming 3D prints. Printing tips: For quickest and easiest printing arrange the same colour prints as shown in the build plate pictures.…
Champion logo plate that can be customised by printing with different inserts and colours. If you like my designs and would like to see more please consider donating/tipping.
A pen pot which you use spare/scrap filament or anything you can think of to fill up the outside walls to make a unique look. Instructions: 1. Print outer file in vase mode with clear or semi transparent filament for best effect. 2. Print…
A stylish and modern terrazzo coaster inspired by all those coasters you see on Etsy. This one is designed for multi color 3d printing for example using the MMU, AMS or with a PRUSA XL multi toolhead. Comes with an optional coaster holder…
Mourn the loss of micronics and affordable SLS 3D printing with this gravestone! RIP Recommended printing settings: - Print the grass in the following orientation with organic supports for a more smooth and realistic grass pattern: Follow…
Wordle grid, print out cubes or use existing calibration cubes and insert into grid. If you like my designs and would like to see more please consider donating/tipping.
These are all currently available results.
