Counting matching models…
slightly smaller scraper (50mm blade) with large easy grip handle. hollow handle with ribs for strength and less materiel required. PETG or ABS recommended PLA works too, no supports needed. V2 scraper has more surface area for better…
money clip (can be user as a paperclip) 2 variations 1 with hexagons and 1 blank easily customised add name, logo etc. step fil included
attachments for the Kaercher WD series vacuum cleaner. the head attachments slide on and off so no alteration needed. will also fits any unit that uses 35mm attachments support needed for most of the attachments. step fil include feel…
container based off the fatman ammo from the fallout games. best to print in orientation given with some support around the lip of the upper and lower parts. large stands around 115mm, small is half that. fixed issue with the fit of the…
set of mini needle nose pliers one flat and another pointed. quick and easy to print PETG or ABS recommended. use 50% infill or more for strength. support needed for the pointed version just on the jaws. Shawn Gano has a great set of…
Fusion Core form fallout 4/76 can be printed in parts or as one piece. link to renders https://www.artstation.com/artwork/XgxKG0
metric circle drawing templates 3mm-34mm one has the diameter of each circle on it other does not. sized for use with a .70mm lead but .50mm may work better depending tolerance of the print.
4 French curves for all your drawing needs
double sided sanding stick slots are made for M5 bolts but smaller blots can be used as they'll still hold the sandpaper in place.
slim 55mm scraper with slot so it hang on a wall and recessed slot for your thumb
various metric drawing templates, measurements not listened on all parts. geometric, mathematical, multifunction drawing templates. sized for use with a .70mm lead but .50mm may work better depending tolerance of the print.
large (standard rolls) 75mm dimeter 25mm depth roll of tape extra large (wide rolls) 75mm dimeter 50 depth roll of tap
pencil extender for slightly use Derwent and Faber castell pencils. extenders are 100m long with slot 40mm deep good for the last ⅓ of your pencils. didn't have any heavily used Derwent pencils guess I like Faber castell. step file…
dial on the protractor has windows to line up the correct angle and slots for marking (see photo). dial has a pointed end and a open end to line up a large pencils. version 2 only changed the size of the numbers and spacing there are now…
15cm ruler (should work with imperial i think) with a lip to sit on edge of a table or bench. slots are 1mm wide with good accuracy. Just used some double sided tape to keep it place so I can quickly measure something without it fall off…
metric and imperial ellipse drawing templates. full size (template 1 = 270mm template 2,3 = 280mm )and split version (much smaller and easier to print). sized for use with a .70mm lead but .50mm may work better depending tolerance of the…
Adjustable height scribe tool uses pencils or anything that can fit check parts for sizes. Requires M6 x 40mm bolts and corresponding nut (wing nut or other thumb screw recommended). Has 2 pivots one at the pencil side and other and the…
thumbscrew for M4, M5, M6, M8, M10, M12 print 0.20 or finer for the threads to work
drakengard 3/ dragon dragoon 3 lunar tear lunar tear with base note it will most likely have a bit of stringing might be better to print on a sla printer then a fdm one but is doable. the crown of the flower is fragile if you scale it up…
liked to original design just had some issues with fit and the blade being slightly exposed, also changed/altered some other parts nothing major just made it more comfortable and easier to use.
angle finder with markings every 22.5° (angle finder lower 22.5) angle finder with markings every 15° (angle finder lower 15) the handle only fits 1 way its easy see but every makes mistakes (I did a few times). difference from original -…
screw driver with storage for both standard and compact bits. hold up to 3 standard bits and 1 in the business end 4 total. some brands might have a tight fit just use the screw driver it'll ease up but you'll need pliers to remove the…
I wanted something to use my extra safety razors that I don't like and so I thought make a knife. Cuts and scraps made of a simple two piece conduction the blade fits into 1 side (with the cut out of the blade) and then the other half…
use the angle finder to transfer an existing angle to another surface similar to t-bevel but smaller and compact.
MAYFLASH Universal Arcade fight stick/arcade stick square, circle and octagon gates. They may fit other joysticks do check if they are compatible with yours before printing as some slots or the snap hooks may be in different places. I…
print 0.2 layer height of finer tightening the thread will hold the pencil in place assembly see image's, 2 or 3 parts depending on your preference. the end cap slides on the half length and chuck screws on to the threaded portion.
A5 and A7 texture boards with wood and leather patterns. examples of texture patterns in image. update: add blank texture boards for custom texture
Paracord jig with 5mm and 5.2mm holes. Required any length of tube or round bar that is fit the measurements above. can make 20mm, 25mm, 30mm, 35mm, 40mm, 45mm and 50mm monkey fists. I've used knitting needles which worked out great.
knurled thumbscrew for M4, M5, M6, M8, M10, M12 print 0.20 or finer for the threads to work
Interlocking puzzles a cube and a sphere version both with a variation that has a hidden compartment and another without. I would tell you how to put them together but that would be no fun. The internal compartments are 18mm diameter big…
small and large backdrop holders for diameters of 100 to 400 degrees. fits up to 600gsm card can be placed behind on lazy Susan's or any round platform.
MAYFLASH Universal Arcade fight stick/arcade stick ring and sleeve that cover the shaft and opening of the joystick. ring and sleeve are compatible with other sticks as long as your using a ball top and not a bat top.
metric orthodrome drawing templates 12mm-1000mm radius, one has the measurements of the radius of each circle on it other does not.
A5 and A7 texture boards with dots, diamonds and triangle patterns, examples of texture patterns in image. update: add dot texture boards
35mm and 55mm Self Centering tool, both have a 10mm opening for a marking tool (pen, pencil, etc. ) 34mm/ 54mm is the maximum thickness that these centering tools can handle. (may be differ depending on print quality).
watch stand for watches up 50mm (watch in photo is 44mm). Quick and easy assemble just line up the pin with the holes and its done. it may look fragile but it surprisingly strong and sturdy.
visualizer modelled after a automatic watch hammer requires super glue and 8×3 mm neodymium magnet.
clips for pencils, fine liners and markers. not a remix as these are the original clips, I just set it as an example if your planning on combining some in to a row. basically just have a small space in-between each clip so they can flex…
Interlocking clips pencils and markers (copic classic, ciao, faber castell, uni paint, posca large and slim). In sets of 1, 2 and 4 so you can mix and match them to fit in tins, draws or wherever you want to put them. I would a a bit of…
A5 and A7 texture boards with lines, cross hatching and hatching patterns. examples of texture patterns in image. update: add cross hatching texture boards
added some more points for the Label to slot into the spool and changed the lettering mostly because I ran into a few issues with printing and didn't want to flex so much. remix of Dominik Císař Material Label
share crystal from the neptunia series renders https://www.artstation.com/artwork/JebEoA
standard (fits standard driver bits) and mini (fits standard driver bits) screwdriver styled as a butterfly. overhangs are a feature not issue. issue with some measurements but all fixed now
full size A4 snail curve with/without text. based off the studio snail curve. I didn't see away to cut in half like the other guides I've made. its still functional at smaller scales
replacement for desk grommets to manage cables (one open and one with segments). no need to modify desk/table unless the current grommet is affixed with glue of fasteners. no support needed. 60mm diameter step file included if you want to…
Calliper ruler attachment for metal rulers that are around 1mm thick and 26.2mm wide(for the 30cm rule) 1mm thick 19..2mm wide (for the 15cm rule). celco and studymate work well any that fit those measurements will work too. A 18mm x 3mm…
requires super glue and 8×3 mm neodymium magnet.
27mm/1 inch die wrench with and with out handle. Requires M4 0.07mm screws or blots (please use at lest 3 to hold the die securely in place). the threads wont print comply but there is enough for the screw to grab on and not move (the…
another spool holder, 2 main parts slot together and the bar is used for added support. Roller 32mm x 6.4mm axle needed. you can adjust the slot by scaling it up or editing the stl/step file.
doesn't require a 123 block to use but give the whole thing more rigidity. 3d printable 123 block included.
chess set modelled after various tools feel free to set any piece to the role you like, the layout I had in mind was screw driver = king nozzle = queen saw handle = rook square = knight spool = bishop sanding block = pawn there are 2…
micrometer stand fits 0-25mm and 25-50mm micrometers, one version has extra grip in the form of groves/teeth, while the other has smooth jaws. requires M10 x 50mm bolt (can be longer if needed) and nut (wing nut or other thumb screw…
build blocks allow you to crates structure and forms almost anything you can think of with these blocks. great for all ages can help devolve motor skills, spatial reasoning, creative thinking, engineering skills. how to use simply connect…
123 block stands vertical and horizontal I found my blocks to be a little off in measurements so the tolerance of the stands might be different if you have higher quality 123 blocks. horizontal stand internal measurement length 78.2mm…
rule stops for rulers up to 28mm wide, one stop has angled jaws the other flat (can be seen in images) requires a M5 blot with a length of at lest 60mm and M5 nut, thumb nut, etc. (these work well…
periodic tiling puzzle simply line up the grooves in each piece and see how big you can go (image for reference) in theory it should never end. a none periodic tiling will not or is unlikely to repeat the same patterns. print as many as…
silica gel container that mounts onto Prusa MK3/S/S+ Z axis-top (holds about 40 grams of silica). 3 parts the lid base and insert that slots into the opening on the Z axis-top and bottom of the base while the lid snaps on, simple and easy…
periodic tiling puzzle simply line up the grooves in each piece and see how big you can go (image for reference) in theory it should never end. a periodic tiling will repeat the same patterns over and over. print as many as you like or…
10mm diameter V jaws for vice. 100mm and 150mm length jaws. groove to help with marking alignment and cutting. groove jaws have slots for 12mmx3mm magnets.
20mm diameter V jaws for vice. 100mm and 150mm length jaws. groove to help with marking alignment and cutting.
I got a similar game during charismas form a bonbon and didn't like the fit and finish also wanted more to pieces to play around with so i made some. no rules just place them next to each other until you make something, just have fun.
10mm diameter double sided V jaws for vice (vertical and horizontal V jaws). 50mm, 100mm and 150mm length jaws.
These are all currently available results.
