Counting matching models…
This is a golf ball marker, for marking 3 straight lines on a golf ball. It was designed as slightly more than half of a sphere so it sort of clips onto the ball. I made this hoping that you would use a standard Sharpie on the middle line…
I added the v2 stick holder that has a little radius on the inside as recommended by BirchD . I love hockey and I've got a couple sticks from games I've been to, so I needed a way to put them up on the wall. I designed this in Solidworks…
This is a redesign of the ball marker by Chuck Hellebuyck Elproducts Not sure if this looks enough like a pokeball or if it looks like a Minion eye. Print Settings Printer: Wanhao i3 Rafts: No Supports: Yes Resolution: .15 Infill: 25%…
Tri-spinner without the Knurl. The caps in the spinner work great for me, but other people have complained. So here is a link to another set of caps that work well too. http://www.thingiverse.com/thing:1848330 Print Settings Printer:…
This is a redesign of the ball marker by Chuck Hellebuyck Elproducts This one didn't print great, but it works good. If anyone tries a different print orientation please leave a comment with your results. Flat on the bottom with a brim…
I needed a wall mount for this camera mount so I made one.
I marked this as a remix, but I just copied the cap placement because it made perfect sense to put them there. I saw one of these on youtube and had to make it. It uses 608 bearings. I used a block of wood and a hammer to get the bearing…
Someone from a Wanhao Facebook group I'm in was looking for a fidget toy in this style. If it's a little tight just try again at 102% or something like that. This size has worked great for me on the rest of my designs though. The printed…
These caps have a mortice and tenon style connection. They fit together well and give you a place to add glue if you want. This is a better version. http://www.thingiverse.com/thing:1988435 Below is a link to my 2 spinners:…
I designed these because most of my filament rolls are just a little too tall for the AMS. The pictured covers were printed with my X1 Carbon, and they fit perfectly with a slight press fit. V2: I've found that a few spools are even a…
Replacement foot for K350 Keyboard. Printed with supports.
The caps press very tightly into each other. I still like to use a little super glue on the inside of the bearing to hold them in place. Probably doesn't have to have the glue. Print Settings Printer Brand: Wanhao Printer: Wanhao…
I had the room on the side and I wanted to empty it less, so I made a big bin. The original was good, I'm just lazy.
This is a redesign of the ball marker by Chuck Hellebuyck Elproducts Print Settings Printer: Wanhao i3 Rafts: No Supports: No Resolution: .15 Infill: 25% Category: Sport & Outdoors
This is a redesign of the ball marker by Chuck Hellebuyck Elproducts . I made the wall a little thicker. Print Settings Printer: Wanhao i3 Rafts: No Supports: Yes Resolution: .15 Infill: 25% Category: Sport & Outdoors
This is a 2-way radio mount for a Clubcar. The clamp fits the steering column and the cup is sized for my Motorola 2-way radio. The clamp could be used to mount other things. I've included all design files so you could modify the cup to…
I know this seems like putting a hat on a hat, but I work in a dirty plant and I got tired of drinking dirt. This snaps on top of the tumbler cap. I included the Fusion file in case you wanted to print a logo into the Dust Cap.
There are two options—one with supports that are easy to cut out and one without. I did the supports because I thought it would be stronger if it was printed lying down. The holes for the BLT are small on purpose so that the screws can be…
I bought the Milwaukee Packout Model 48-22-8431 and wanted to use the bins for screw storage. I included the Fusion360 models so you can modify the text for whatever screw size or whatever you want to store. Look for the Sketch labeled…
I wanted a bigger place to put my fingers and this is a more simple design since its only 1 file. This fit perfectly in my 608 bearings and the printed ridges locked it in place. Print Settings Printer Brand: Wanhao Printer: Wanhao…
Here is a link to caps that will fit. http://www.thingiverse.com/thing:1848330 Print Settings Printer: Wanhao i3 Rafts: No Supports: No Resolution: .2 Infill: 75% Notes: I wanted it more solid for the weight. You don't have to print it at…
I've had a fidget with gears on it for a while, but I wanted to add a magnet slider so I designed this in a comfortable form factor for me. Printing instructions: Print it however you want. The only thing to be concerned about is that…
These are all currently available results.
