Counting matching models…
This can print with only 10% infill to minimize plastic usage. Lettering can be painted to give it some pop. Ensure that you print one of each number cube because they are not the same and work together to make the 1 through 31 days. The…
Late one night, I stepped on, and painfully broke, my child's Lego Mario pants that were left on the floor. Never mind that their room should have been tidy, I was still branded “worst parent ever”. Thankfully, inspiration struck, and…
See the video below for easy assembly instructions and demo video. To get the “bones” to print, use white filament for the first few layers and then switch to a contrasting colour. For mine, I printed in PETG with a 0.4mm nozzle and…
This model should be printed out from PETG to allow flexibility of the locking tabs. NOTE the locking tabs slide into or through the table hinge for two reasons. Being separate pieces allows for maximum strength in bending as they can be…
*Component Added - Clip with 11.5mm LED strip gap This is a newly created model for my enclosure to organize and clean up my enclosure wiring and led lights. The conduit can be printed in white to act as a diffuser over top of led strips.…
This is a single unit with a captured tail actuator slider. Just fish the ribbon back through the tail and snap the button into the slider and you're ready to flex it. I printed this model in PET-G and for a fast print I used a 0.4mm…
Three bowl sizes are included although you can always scale them up or down in the slicer. Two versions of each are also include, the “solid” is to use vase mode for a nice clean looking bowl. The shell has a 0.5mm wall thickness.
LEGO compatible base. 1 inch design for board games such as Dungeons and Dragons. Can use a 0.25mm nozzle for better post accuracy.
The date dial is print in place. The make I made was with a 0.4mm nozzle; however a 0.25mm would help crisp up the lettering. The included file has a colour change layer to get the two-colour print in my post. I have included the step…
A larger diameter nozzle is recommended (0.6mm or greater) as some of the surfaces approach a shallow angle meaning that the perimeters may have trouble properly sticking to the layer below. You can up the creepy factor by painting the…
Please note, that this model can print without supports. Also, one end is split so that you can join the links together (the split end slides over the solid pinched area of the next link). Depending on the material used, the small gap on…
This design has minimal plastic use and is a slide together model. I made it from PETG to make it a little more durable (you do throw it after all). Layer height is 0.3mm, 0.4mm nozzle will give you one perimeter for the hoops. I used a…
Customizable coaster for your wedding/bachelor/bachelorette party. Two 3mf files were provided so you can quickly print a standard design. The Fusion 360 files are provided so that you can easily customize the text that appears on the…
Minimal plastic usage. Clip slides directly into the clip and is neatly held by the edges. A standard countersunk wood screw sits flush within the plastic for a very clean installation For a complete solution see the Conduit System Here:…
Perfect gift for friends and family. Print and give a unique gift to your BFF's Print out these cute charms for pendants or bracelet bangles. Pick a material that light can shine through. These were printed in PET-G Signal White with a…
This decision making pendulum is a fun, random way to answer those burning questions like, should I get take-out for dinner. Designed for 8 pieces of Ø6mm by 4mm thick magnets (6 in the base, two stacked in the pendulum) or 6 pieces of…
Never lose your beverage again. Model contains integrated photo corners that you can use to put paper or cardstock name tags in, or perhaps a wedding or engagement photo for your guests. The couple's name, wedding date can also be etched…
Less than 5m of filament to print the solid ribbons, stem, caps, and tealight holder!!! Ribbons slide into the side opposite the nub in the caps. Check out my other vase mode pumpkin WHOSE EYES FOLLOW YOU!…
This cookie cutter will make a slight mark for where the arms it within the body. Great guides for decorating with icing. You can use the interior lines or not.
Temporary disclaimer for why this is in the “Flying Contest”. Instead of designing a plastic object that flies through the air, I designed a STEM kit that will create a Vortex of air that flies through the air! Watch it knock over targets…
Tired of digging through your bag to find your USB-C headphone dongle? This handy-dandy keychain clip keeps your adapter cord at the ready while keeping dust and debris from entering into the connectors. Plus it is an aesthetically shaped…
This two piece design allows for small treats to be hidden inside the pumpkin. The two pieces can be printed from different colours (ie orange and green) for a more realistic look. You can up the creepy factor by painting the eye sockets…
This 1 inch base is made to hold cardstock or photopaper to make quick and easy monster encounters or NPCs when you don't have enough 3D models (or any models for that matter). Due to the fine detail in the slot, using a 0.25mm nozzle is…
Works with the Conduit System: https://www.printables.com/model/297032-conduit-system-wire-handling-and-led-strip-mountin 3MF file has a filament change at around 1mm, print the base layer in white and the rest in whatever colour the rest…
These status condition rings are stackable and fit 1 inch base TTRPG minis. A permanent marker can be used to trace the tops of the embossed letters for contrast and can be printed in different colours to colour code your adventure. Rings…
Three linked hearts with a 1mm wall thickness. If you need a different wall thickness, send me a note and I can shell a new model.
Frankenstein sinking into or rising from the table. Vase mode makes a nice bowl for displaying candies or other goodies. The model is scalable within the slicer. I recommend using a 0.6mm nozzle or higher as it will help with the few…
The bottom of the ghost features small “fins” to securely hold on to various diameters of pencils.
These status/condition rings are similar to the embossed ones found here: https://www.printables.com/model/184952-condition-and-status-tokens-for-1-inch-dungeons-an These have a debossed text so that you can press fill with modelling clay…
This model is a variation of the 3 heart linked bowl design. I split the model into three distinct nesting hearts so that they could be scaled larger than what the print surface may allow.
Minimalist phone cradle when charging your phone. Works both with or without a phone case. Sample was printed at a 0.3mm layer height and 0.4mm nozzle. The “membrane” is set for 0.3mm thickness to help hold the bracket in place. If you…
Floating keychain add on for your boating keys. Would need to print with a low fill for maximum buoyancy. This model has yet to be tested; however the keys loop underneath so with appropriate weight the character will float arms up out of…
Perfect surprise for Date Night! Stuck for ideas, make it fun by drawing a heart from a bag, shine a light behind it and see what your future date night activity holds! Pick a material that light can shine through. These were printed in…
Quick print in Vase mode to hold and organize 8 Silhouette Cameo sketch pens. Printed with a 0.4mm nozzle PETG material, 0.3mm layer height - Vase mode
Best to print with a 0.25mm nozzle for the text. The same was printed in PLA with a 0.2mm layer height and a 0.4mm nozzle.
Print this design in Petg for flexibility. A pony tail fits right through the center of the web saving your ears from the elastic of a mask. Makes for a spooky Halloween accessory. While you're here check out my two other spooky pumpkins…
If you use a vent for your system and wish to have a board that fits in a window that has an alarm system contact. This bracket will use the 10 x 6 x 2mm spare magnet that comes with the MK3S kit. This way, you can put the vent plate into…
These are all currently available results.
