Counting matching models…
A miniature Nintendo Switch for your dollhouse, figurines or just for fun. Prints well with PLA at 0.1 layer height. For a nice finish iron the top layers. It works very well on the middle part, with the controllers it can smear a bit…
Prints fine with PLA 0.2mm layer height and ironing. The fly amanita and ladybug models allow an easy 2-color print. If you have Prusament Galaxy Green I suggest that for the clover because it slaps.
Different versions of glass markers, plain or with icons. I found it best to print the tag and icon separately and glue them together with a drop of PLA glue afterwards because then the base needs no supports to print and you can mix and…
Prints well with PLA at 0.10-015 mm and ironing the top layer for a nice finish. I didn't put indents on all the cubes because they tended to interfere with the hinges. Might experiment on that a bit later…. I did first put indents where…
I included a bar for the hinge but at original size you can also just use a bit of paperclip or a toothpick if it doesn't print well. Looks with PLA at 0.2mm.
Prints nicely with PLA at 0.2mm, 0% infill and 2 or 3 perimeters. If you have any multicolor/rainbow filament I very much recommend using that, it looks great! ETA: So I previously suggested printing it upright with snug supports, since…
Modular egg holders for the refrigerator with magnetic feet to click them together for stability. The holes in the feet fit 6mm x 3mm magnets (diameter/height). Magnets can easily be inserted after the print is finished. If you don't want…
Legend of Zelda themed Tags to put on the rim of your glass. The bases come in different versions, a thicker one that should fit your standard Ikea glass, a thin one for wine glasse and a combined version (slightly bulkier) as well as…
An ant feeler hairband. I recommend PETG instead of PLA, the higher flexibility makes it more comfortable to wear
I printed them at around half the size of the original model. The Otter Captain printed okay without supports for the hat though it could have looked nicer At original size you probably need supports but I haven't tried that yet.…
Flat icons with a Halloween theme. You can print them out in different sizes and use them as table decoration or similar. They are also sized to be used as motives for my glass markers: https://www.printables.com/make/2376551
I found it works better to print bases and icons separately and just glue them together with a drop of PLA glue afterwards. It saves support material and makes it easy to mix and match the colors, plus you can have some plain bases too if…
Outer Diameter / Außenradius: 20mm Inner Diameter / Innendurchmesser 16mm Prints well with PETG at 0.2mm.
I really liked this multifunctional arm and phone holder so I designed a compatible piece that can be clipped to the front of a Prusa Mini/+. I also made some extra connector pieces to suit my needs, but you can use any from the original…
Fits a 3.5mm wall. It holds very well and you can easily take it on and off. Material: PLA at 0.2mm
A cute little otter except that he is a member of the Spanish Inquisition. Printed with PLA 0.2mm as multicolor print on a Prusa XL.
Behold: The Easter Otter. Printed with PLA at 0.2mm, no supports. Fits on a Prusa Mini.
Extra narrow cutlery insert for kitchen drawer with long spoon compartment.
These are all currently available results.
