Counting matching models…
DIN Rail mount for Shelly Mini Devices such as https://amzn.to/3PGt6nS, https://amzn.to/43ABUkR or https://amzn.to/4aqvhUE allows concealed installation in the distribution box. 2024/12 - Update to V2 for a better fitting to Gen2 and Gen3…
Wallmount for AVM FritzBox Router with cable management 7590 7590 AX 6660 Cable 7530 5530 8850 6850 6660 6890... It keeps the Fritzbox cool and ensures better WLAN Performance due to fewer reflections from the wall. Affiliate Links for…
Minimal transport and protection case for the DJI NEO Drone: https://amzn.to/4eot6Td New V2: Thicked Top added hinges added charging opening with cover For v2 the cover should be printed with TPU or FLEX Material A M3 screw and some 1 mm…
Wall Mount for Shelly Wall Display ( https://amzn.to/3RlgLqP ), tilted by 30° and can be mounted with or without a wiring box below it. I have also shared a cut-out version that allows it to stack onto a Jung CD500 Frame. Maybe other…
This is an adapter for combining the Shelly Wall Switches e.g.: https://amzn.to/3XbSPc6 https://amzn.to/4e7JSXF https://amzn.to/458Ltsc with or without https://amzn.to/4aP6PMe https://amzn.to/456prWQ with the Jung CD500 System such as…
Easy to print charging holder, connect very easily with the watch.
This is a simple baseball cap. I needed one for a pilot figure and found none so I've drafted my own one. Maybe I'll add some stitches and a logo plane at some time. Works fine printed with TPU or other flexible material but it is also…
Socket- and Switch 30° Adapter with mount holes for DIN 49073 inserts. Updated Model - first one had a small defect in the mesh Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 10% Filament: Generic PLA or PETG…
Charging Holder for the Xiaomi Smart Band 8 Pro Fitness Tracker https://amzn.to/3XJuUzJ This is a variant of my Smart Band 7 Model with Upside Down tuning.
Under table / Toolbox Holster for the Bosch IXO ( https://amzn.to/3m5ENTq ) electric screwdriver. Keeps the tool secure in place even vertically. Designed for the 5th generation but I have also tested it with 1st generation and it also…
This is an adapter to mount mobile monitors from about 10" to 18" to VESA 100 enabled monitor arm or monitor mount. The monitor can also be quickly removed again. In advance to 4 arms and the backplate, you need four about M5x20mm…
Model Rocket tested with Type B engines (e.g.; https://amzn.to/3mc9iab ) - printable in 6 parts (4 wings). The wings need to be glued in with CA. I use a streamer instead of a parachute (don't forget some protective wadding between engine…
Open Frame for testing PC components BOM: all STL Elements printed once 4 5 mm rods each 320 mm long (I used CFK tubes, could be anything else what is strong enough) 3 M3x8 countersunk screws 3 M4x8 countersunk screws 8 Circuit board…
Housing for a 120 mm fan (Example: https://amzn.to/3vwWWUO ) with an easy to exchange holder for a carbon filter. I use two of them in my airbrush/soldering cabin. Easy to print with no support. Both parts need to be glued together with…
Simple Raspberry Pi 4 Housing with openings for the camera wire and the GPIO ribbon cable. It also includes my dummy model (base: https://amzn.to/43G07q8) for fitting tests. Print Settings Printer Brand: Prusa Printer: MK4 Rafts: Doesn't…
Model Plane Tire very small (13 mm), designed and used it a ~4 kg jet model with retracts. I printed the tire with black TPU (10 % infill/1mm wall thickness) and the rim (two needed) with white PLA. I assembled them with contact glue and…
Printable Leash Holders with a wall mount. I painted the paw prints in my print with some acrylic paint Needs 3 M4x35 countersunk screws for assemble and support the leasch holders Print Settings Printer Brand: Prusa Printer: MK4 Rafts:…
Fender mount for plastic fenders on bicycles. Category: Replacement Parts
After never really making friends with the dynamo on my 35-year-old everyday bike, I switched to a Battery light solution I mounted the lights with those adapters in the intended places and it is still removable for charging. I use these…
Flexible mount for the Digital Multimeter to keep the hands free. It is a holster and I use it with my mount system: https://www.thingiverse.com/thing:4110316 But it can also combined with any GoPro compatible mounting parts. I've…
Flippable camera cover for the Amazon Echo Show (2.Gen) Print it in a fine resolution - I took 0.1 mm on my Anycubic I3 Mega or even better 0,10mm FAST DETAIL on my Prusa MK4. You also need an axle of about 1.8 - 2mm diameter (steel to…
I tried to order corrective Lenses for my DJI FPV Drone (…
Housing for the Raspberry Cameras. Two camera (base: https://amzn.to/3n7rvah or https://amzn.to/49hKczt) and housing I'm using with my mounting system: https://www.thingiverse.com/thing:4110316 But it can be combined with any GoPro…
I tried several other fan mount solutions for my combination of my Noctua fan with the very high build heatsinks of my stepper drivers. But there was not enough space for the fan left, so I designed this solution using the build-in fan…
Trigger Lock for the Dreame Vacuum Cleaner Tested with the Dreame XR:…
USB or LED Powered Battery Replacement. Works with efficient USB Power Supplies as Replacement for 2 AA Cells. If there is need for more Cells you need to add my AddOn Cell – connected to the “+ out” on the PCB - and switch from USB Power…
This is my USB powered soldering fan with LED light. It can be mounted using most Gopro compatible mounting material such as my own designs: Mounting System: https://www.thingiverse.com/thing:4110316 Stand/Tripod:…
Cross-over strap for transmitter tray. Works fine with heavy RC Transmitter. I printed it with PLA and TPU - both works fine. For the webbing I'm using 40 mm or 1.5" Nylon strap. The belt is glued at the ends, one sided, into the keepers.…
Additional housing based on the great Octoprint Control Panel design ( https://plugins.octoprint.org/plugins/display_panel/?utm_source=octoprint&utm_medium=announcements&utm_content=1.5.2 ). I adapted it with my Raspberry 3 Housing:…
Wall mount and stand for a Fritz!Box 6690 Pro with about 85 mm clearance for better Wifi antenna radiation Should also work for Fritz!Box 6690 Cable, 6590 Cable & 6591 Cable. Fritz!Box 6690 Pro Cable: https://link.amazon/B07mgzuNO
Fitting a Shelly Wall Switch into a Jung CD 500 Frame Switch: https://link.amazon/B0h3HJ0Ou Frame: https://link.amazon/B0jc54g4d Wall Socket: https://link.amazon/B074a1Wh9
These are all currently available results.
