Counting matching models…
Simple, space efficient storage solution for small pliers/nippers/cutters/strippers used in electronics. Two standard bins in the files, one fits up to 6 pliers with a grip thickness of up to 11.5mm (the right one in the photos) and…
What it says, takes containers up to 13.5x13.5x70-ish millimeters, that covered all that I had at hand. I use this for new endmills and keep the ones currently in use in the endmill tray you can find in my uploads. The design goal here…
Print 12 dividers if you want to cover yours bases. Any unused dividers can be stored in the box in the center. Fits up to 14 slim cartridges or 10 medium or 8 wide ones. Or any combination of cartridges.
Fits your standard 10cc and 30cc syringes. Small drip tray built in. It does definitely need magnets in the base, since it is so tall. These can be printed in one go without supports, but once you get above ~80mm you will want to slow…
Takes spools up to 35mm width and 70mm diameter (with the 20mm axle!), the axle can be any diameter between 10 and 20mm, a couple are in the files section. I wanted a spool holder that prevented unwanted movements of the spool, hence the…
Remix of the 6x3 part, split in two 1x3 parts, added magnet cutouts and modified it to allow printing while stored.
Holds up to 20 end mills, up to 6mm (1/4 inch) diameter and about 60mm in length. That covers virtually all end mills up to that diameter. I use this tray for the endmills currently in use and keep new ones in the endmill holder you can…
Allows charging while the batteries are in the holder. Downside is that only two fit into a 1x1 square. I did consider a staircase type of holder to allow access to the charging port on a 1x2 bin, allowing for 6 batteries in that bin, but…
The driver stand is angled fairly shallow, to keep it with the 2x2 / 1x2 envelope, even if a bit is in the driver. Two models and their Fusion base files included, v1 with the bit storage, v2 without. V1 could be modified to take more…
This stand was originally made to fit my two Mitutoyo 537 Dial calipers. However, I have slightly modified the files ("Universal") so they to work with the half dozen different 150mm/6inch calipers I had at hand, digital and analog,…
Simple wall mount for the Osram Batterycharge 904. Change the mounting holes to suit, countersunk bolts are required! Snug fit, resize if you want a loose fit.
Fits the Aircraft NE Mini Pro / Hazet 9035M-5 needle scalers. The Hazet is the same unit, just rebranded. Not to be confused with the 9035M-6! If you installed a different fitting, it might need modification to accomodate that.
Fixed several issues with both the original and earlier "fixed" versions.
Quick and dirty model, I printed it standing up, the way it'll be mounted. It will need supports that way, but the holes for the solder tips will be dimensionally accurate. It's not a 100% perfect fit, since there is hardly a straight…
These are all currently available results.
